BURG WACHTER Scan and Lock 610/53 Instruction Manual
- June 9, 2024
- BURG WACHTER
Table of Contents
Scan and Lock 610/53
Instruction Manualhttps://www.youtube.com/watch?v=NZnWSOHIdxU
Operating instructions
Structure
- Lock body and shackle
- USB type-C port
- Emergency lock
- Fingerprint sensor
- Indicator light
opening options
-
Fingerprint
-
Key
Fingerprint Sensor
Features
Easy Operation:
Up to 10 fingerprints can be programmed (1x administrator, 9x user)
Waterproof & Dustproof:
IP65, protected from rain and dust.
Unlocking in 1 second:
Quick-recognition technology, identify your fingerprint quickly.
Low Power Consumption:
After being fully charged, up to 1,800-2,000x locking and unlocking possible.
Ways to unlock
Note:
Pull the shackle after release via the fingerprint or open it upwards using
the key.
Operating instructions: Fingerprint sensor
Action To activate: press the shackle once To open: place your finger on the sensor for around 1 sec.
Administrator
Action To activate, press the shackle down once Press fingerprint sensor around 3s Input administrator fingerprint, 10 times Opening with fingerprint
| Beeps | LED | Explanation |
|---|---|---|
| Blue flashing | ||
| Two beeps | Blue shining | Note: At the factory and in delivery condition, |
the lock can be opened with
any fingerprint. The lock is individualised when it is set-up by the
administrator.
Set administrator account
| Beeps | LED | Explanation |
|---|---|---|
| Blue flashing | ||
| Two beeps, 3 sec. pause, one beep | Blue shining | |
| One beep | Blue flashing, lx | Input finger again |
| Four beeps | Red flashing | Finger not registered, input again |
| Long beep | Blue shining | Programming finished |
| One beep | Red shining | Restart programming with 1st step |
Action To activate: press the shackle down once Press fingerprint sensor around 3s Place administrator finge rprint Place user fingerprint, 10 times
Set user account
| Beeps | LED | Explanation |
|---|---|---|
| Blue flashing | ||
| Two beeps | Blue/red flashing | |
| One beep | Blue flashing, lx | |
| Vier Piept6ne | Red flashing | Place administrator finger again |
| One beep | Blue flashing, lx | Place finger again |
| Four beeps | Red flashing | Finger not registered, input again |
| Long beep | Blue shining | Programming completed |
| One beep | Red shining | Restart programming with 1st step |
Action
To activate: press the shackle down once Place administrator fingerprint, 8
sec. Place administrator fingerprint
Action Charging with enclosed USB-cable
Reset
| Beeps | LED | Explanation |
|---|---|---|
| Blue flashing | ||
| Two beeps | Blue/red flashing, pause, red flashing | |
| Long beep | Red shining | Lock reset |
| Four beeps | Red flashing | Finger not registered, place again |
Charging
If the green light flashes after you unlock it, it means the battery is low.
Please charge it in time to avoid locking unsuccessful by fingerprint when the
battery runs out. In order to charge, use the included Type-C USB-cable.
| Beeps | LED | Explanation |
|---|---|---|
| Green flashing | ||
| Green shining | Note: If the battery is already completely discharged, |
the lock can still be opened
with the enclosed key.
Troubleshooting
| Symptoms | Reasons | Solution |
|---|---|---|
| The light is off when you press the sensor | Battery discharged | Charging the |
fingerprint padlock
In standby status| Please press the shackle
Any finger can unlock| The lock is in factory setting, any finger can be be
used to open be used to open it.| Set administrator account
Cannot unlock| Sensor does not identify finger| Sensor surface or fingerprint
dirty; please clean
Warnings
Please note the following information:
- The output voltage of the adapter must be 5 V when charging.
- Do not insert any extraneous objects into the lock or the USB port.
Warranty
BURG-WÄCHTER products comply with the technical standards at the time of
production and adhere to our own quality standards. The guarantee only covers
defects which can be proved to have resulted from production or material
defects at the time of purchase. The warranty ends after two years, further
claims are excluded. Defects and
damage caused by e.g. transport, incorrect operation, improper use, wear etc.
are excluded from the warranty. A short description of any defects identified
must be made in writing and the device returned to the place it was purchased,
together with the original packaging. After the device has been tested, and
within a appropriate period of time, the guarantor will decide whether or not
to repair or exchange the item. For returns, all undamaged device parts must
furthermore be in the factory setting due to your right of revocation. Failure
to comply with this will invalidate the warranty.
Disposal of the device
Dear customer,
please help us to avoid unnecessary waste. Should you intend to dispose of
this device at any time, please remember that many components of this device
contain valuable materials that can be recycled.
Please be aware that electrical and electronic equipment and batteries
marked in this way must not be disposed of with household waste but collected
separately. Please obtain information on the collecting points for electrical
waste from the responsible authority of your city/ municipality.
BURG-WÄCHTER KG hereby declares that this device complies with the
Directives 2014/30/EU, (EMC) and 2011/65/EU (RoHS).
The complete text of the EU Declaration of Conformity is available at the
following Internet address: www.burg.biz
Printing and typesetting errors as well as technical changes reserved.
BURG-WÄCHTER KG
Altenhofer Weg 15
58300 Wetter
Germany
www.burg.biz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>