SIEMENS EK-35 Rail Kits for System 3 Enclosure Instruction Manual
- June 9, 2024
- SIEMENS
Table of Contents
SIEMENS EK-35 Rail Kits for System 3 Enclosure
Use the Model EK-32, EK-33 or EK-35 Rail Kits to mount modules in EB-32, EB-33 or EB-35 back boxes respectively. Each kit consists of 2 mounting rails, 2 top and bottom “Z” brackets, from 0 to 4 “U” brackets and mounting hard-ware. Refer to the table below for rail kit infor-mation.
- Mount the 2 mounting rails on the studs in the back box. Secure in place with the flat washers and hex nuts provided.
- Attach the “Z” brackets to the top and bottom positions of the mounting rails with the screws provided.
- Attach any “U” brackets to available positions on the mounting rails between the “Z” brackets with the screws provided.
- For EK-35 rail kits, install the 2 tension brackets on the rail assembly using the hardware provided. The longer bracket goes on the left side; the shorter bracket goes on the right side.
EK- RAIL KITS
Back Box
| Single Module Capacity|
Rail Kit
|
“Z”
Brackets
|
“U”
Brackets
|
Tension Brackets
|
Mounting Rails (2)
EB-32| 16| EK-32| 2| 1| 0| 2-1/2″ x 22-1/4″
EB-33| 24| EK-33| 2| 2| 0| 2-1/2″ x 32-3/4″
EB-35| 40| EK-35| 2| 4| 2| 3-1/2″ x 53-3/4″
Siemens Building Technologies, Ltd. 2 Kenview Boulevard
Brampton, Ontario L6T 5E4 Canada
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>