YCCTEAM YCC-SW4005 Wireless Pro Controller for Switch User Guide
- June 9, 2024
- YCCTEAM
Table of Contents
YCCTEAM YCC-SW4005 Wireless Pro Controller for Switch
PREFACE
- Thank you for choosing our product. For bringing you with pleasant gaming experience, please read this user guide and all safety instructions carefully to ensure safe and proper use.
- The instructions in this user guide are based on the default settings of the device.
- All pictures, statements and text information in this guide are for references only, actual product prevails; Updates are subject to change without prior notice and it will be edited in a new version guide, we reserve the right of final interpretation.
- Available functions and additional services may vary due to different devices, software or service providers.
- Please don’t store this product in damp or high-temperature places.
- Do not knock, beat, pierce or try to disintegrate this product so as not to damage it unnecessarily.
- Don’t discard it with garbage as this product is with a lithium battery built-in.
- Don’t use this product near fire or heat sources.
- Unauthorized or non-professional personnel are not allowed to disassemble this product, otherwise, it won’t be in the scope of the after-sales warranty.
- The battery has a limited life span. Battery duration will gradually decrease with repeated usage and age. Battery life also varies depending on the storage method, conditions of use and environmental factors. When the wireless controller is not used for an extended period, it is recommended that you fully charge it at least every three months to help maintain battery functionality.
CONTROLLER DIAGRAM
CONTROLLER FEATURES
-
This Pro controller is compatible with the Switch / Switch Lite console, Android and PC. (When work on PC, it can be connceted wired or wirelessly, wired connection with a USB cable, while wireless connection with Bluetooth).
-
No need to install any driver, it can be used once connected to Switch/Switch Lite console.
-
Wireless connection, lower interference, stable connecting signal.
-
One-button connection mode for easy operation; supports screenshot and storage functions.
-
Built-in 1000mAh polymer lithium battery, it can be continuously used for about 8-10h after fully charged.
-
The controller can support the gyro axis function on the console, and the dual-motor vibration function.
-
Up to four wireless Pro controllers can be connected to a Switch/Switch Lite console simultaneously.
-
It can be used normally even during charging.
Ergonomic design and lightweight construction make it comfortable even for long hours of continuous gaming. -
It can be upgraded by update software via connecting it to PC. 11). Adopting Bluetooth wireless communication to connect with the console, with strong anti-interference ability and manipulate freely, and connection signal is stable.
-
Support XINPUT(PC360) mode on windows computer. Need to download and install the PC360 driver.
-
Connect the Switch Dock via the USB data cable, the controller can be used as a wired controller. Unplug the data cable, it still can connect by bluetooth.
CONNECTION INSTRUCTION
Connect to the Switch/Switch Lite console via wireless
A. Connect the controller to the console for the first time:
- Start the switch / Switch Lite console, click the “System settings “menu button in the main interface, enter the next menu option, click the “Airplane mode” option, and then click the “Controller Connection (Bluetooth) ” option to make its Bluetooth function on.
- Enter the Bluetooth pairing mode of switch console controller, click the “Controllers” menu button in the console home interface, enter the next level menu option, and then click the “Change Grip/Order” option, and the console will automatically search for the pairing controller.
- Long press the pairing button for 3 seconds to enter the Bluetooth search pairing mode. Led1-led4 flashes circularly (4Hz). If the connection is successful, the corresponding channel indicator light of the switch console automatic allocation controller is always on. If the pairing is not successful, the controller will shut down after 60 seconds.
Connect the controller to the console again:
Short press the HOME button for 1 second to turn on the controller, the
controller is automatically connected to the console, and then press the A
button to operate.
Wake up the controller:
If the Switch/Switch Lite console is in sleep mode, Short press the controller
button “HOME, +, -, O, A, B, X, Y, D-pad, pairing button, L, R, ZL, ZR” to
wake up the controller, the LED1~LED4 will flash quickly and automatically
connect to the previously paired console, and it will automatically in sleep
if it fails to reconnect within 10 seconds.
If the SWITCH console is in sleep mode (not in airplane mode), press the
“HOME” button can wake up the console.
Switch/Switch Lite mode Wired connection:
- Open the wired connection options on the Switch console and then put it into the Switch Dock.
- Connect the controller to the Switch Dock using a USB charging cable.
- The controller will automatically connect to the Switch.
Bluetooth Pairing Mode:
- When the controller is off, press and hold the pairing button until the LED1~LED4 lights flash quickly (about 3 seconds), then the controller will enter the Bluetooth pairing mode.
- When the controller is working, short press the pairing button that can immediately shut down. (Hibernation mode)
- When the controller is off, short press the pairing button that can wake up the controller. (Reconnect)
- It can automatically recognize your PC, LED 1 and LED 4 will light up after the connection is successful.
- If the STEAM is installed on your PC (Steam has to be in switch mode), the LED will be followed in the Steam.
- If the pairing is unsuccessful within 1 minute, the controller will automatically sleep.
USB Wired Mode:
It can automatically recognize the Switch console and PC. On the PC, it will
automatically be recognized as X-INPUT mode by default, and the LED1+LED4 is
on.
You can press and hold the “+” button and the “-” button for 3 seconds to
enter in the D-INPUT mode, and the LED2+LED3 will be on.
Note: When the USB cable is inserted, the Bluetooth will lose connection.
When the USB cable is unplugged, the controller will be automatically
reconnected.
CONTACT INFORMATION
For support or general help questions please contact
E-mail: ycc@yccteam.com
website: www.yccteam.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>