ELEGRP A4PLUG 3 In 1 Charging Station User Manual

June 9, 2024
ELEGRP

ELEGRP A4PLUG 3 In 1 Charging Station

ELEGRP A4PLUG 3 In 1 Charging Station

FEATURES

  1. Charge your iPhone, iWatch, and airpods simultaneously.
  2. Built-in watch charger supports charging iWatch directly.
  3. Save space by using only one cord and charging stand.
  4. USB-C connector, product input 9V /2A.
  5. Smart chip multiple protection to protect your electronic devices.

COMPATIBILITY

Charging station compatible devices such as:

  • Airpods®
  • iPhone®
  • iWatch®

APPLICATION

  • Cafes
  • Restaurants
  • Salons
  • Libraries
  • Airport Lounges
  • Labs
  • Bedrooms
  • Kitchens
  • Meeting Rooms
  • Offices
  • Hotels
  • Schools
  • Workstations

SPECIFICATION

Dimension

Input Current 9V/2A
Output Power 15W
Conversion Rate 90%
Input interface USB-C port

WARNINGS

  • Read this instruction carefully. Keep this instruction for later reference.
  • Max input voltage is 9V, max input current is 2A. The socket outlet shall be installed near the equipment and shall be easily accessible (Remarks: 9V /2A is the maximum input and 1 SW is the maximum output minus the conversion loss).
  • Protect equipment from humidity.
  • Disconnect equipment from the power supply before cleaning. Do not use any liquid or an aerosol cleaner. Use only moisture cloth.
  • Equipment should be placed on a reliable surface. A drop or fall cou ld cause damages.
  • If the equipment is not used for a long time disconnect the equipment from the power supply to avoid damage by transient overvoltage.

LED INDICATORS SHOW THE STATUS

Blue light is always on after the charging station starts.

ACCESSORY LIST

User manual 7
Charging station
7
USB-C fast charging cable 7
Cable slot auxiliary pen
7
Headset silicone pad 3
Charging head
7
Warranty card *7

CAUTIONS

  1. For safe and efficient charging, use the included 7 BW quick charge adapter. Otherwise, the charger may not charge three devices simultaneously or get damaged in the long run. Use the original charging head, or optional 18,..,24W charging head.
  2. Phones/watches/earphones must be compatible with this charging station (refer to compatibility in this leaflet or contact us).
  3. Use the included power adapter and cord. Make sure they work and are fully connected.
  4. Upgrade your phone’s or watch’s or to the latest version, then restart it and replug the charger to avoid charging glitches caused by the os.
  5. Align the devices precisely and make sure they stay close to the charger. Take the devices away, and then try realigning if necessary.
  6. We recommend you to use the product at (o,..,40°c), 27°C is the best.

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules . Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the rece iving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body : Use only the supplied antenna.

COMPATIBILITY & AVERAGE CHARGING POWER

Compatible with power

iPhone 14 (Plus/Pro/Pro Max), iPhone 13& 12 (Mini/Pro/Pro Max),
iPhone 11 (Pro/Pro Max), iPhone SE (2gen), iPhone X (XS/XR/Max),
iPhone 8&7 (Plus), iPhone 6 (6S/6Plus/65Plus)
iPad mini (2/3/4/5)

Apple Watch 8/Ultra/SE iWatch 7, 6, SE, 5, 4, 3, 2 (1 gen not supported)

Airpods Pro 2, Airpods Pro, 3gen, 2gen, 1 gen

Actual compatible device models may change with time. Please contact us for confirmation.

FCC ID : 2A4XQ-A4PLUG

Symbols

ELEGRP  Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals