EQi Industrial T4020 Household Electric Treadmill User Manual

Household electric treadmill
Model NO:14020
User Manual

Please read this manual carefully before using the product and keep it properly for future reference.
IMPORTANT: Read all instructions carefully before using this product. Retain this owner’s manual for future reference. The specifications of this product may vary from this photo, subject to change without notice.

Safety Precautions Warning Notes

Note: Please read the instructions carefully before using the machine and pay attention to the following safety precautions:

• It is recommended to place the treadmill indoors to avoid moisture. Do not splash the treadmill or place any foreign matters on it.

• Please wear appropriate sportswear and sports shoes before exercise. It is strictly prohibited to exercise barefoot on the treadmill and ensure full stretch.

• The power plug must be reliably grounded, and the socket must have a special loop to avoid sharing with other electrical equipment.

• Please keep children away from the machine to avoid accidents.

• Please avoid overloading the product to avoid damage to the motor and controller, accelerating the wear and tear of bearing, running belt and running plate, and regular maintenance.

• Please reduce the indoor dust, keep the humidity, and avoid generating strong static electricity disturbing the normal operation of the meter and controller.

• Please turn off the treadmill power after the exercise.

• Please keep indoor air circulation when using the treadmill.

• Please stop exercising when you feel uncomfortable or abnormal, and consult a doctor.

• Please store the silicone oil in a place out of the reach of children after use to avoid accidents due to ingestion.

• The safety area behind the treadmill is 1000x2000mm.

• Emergency jump off: please hold the handrail with both hands to support your body, while stepping on the sidebar, jump off from the side of the treadmill.
  WARNING: Please observe the following regulations to reduce accidents or injuries:

• Please check whether the clothes are fastened or zipped up before using the treadmill.

• Please do not wear clothes that are easily caught by the treadmill.

• Please do not place the power cord near hot objects. Keep children away from the treadmill.

• Please do not use the treadmill outdoors.

• Please cut off the power before moving the treadmill. The upper shield and left and right rear tailstock can only be opened by professional staff. Only one person can exercise on the treadmill when the machine starts.

• When you feel dizzy, chest pain, nausea or shortness of breath during exercise, please stop exercising immediately and consult your fitness instructor.
  WARNING! MANDATORY1
  Please be sure to use it only after discussing with a specialist when receiving medical treatment or for the following patients.

  1. Patients who are currently suffering from back pain or who have had injuries to their legs, back or neck in the past, or who have numbness in their legs, back, neck or hands (those with hemiated discs, spondylolisthesis, cervical spondylosis, etc.).
  2. People with deformed arthritis, rheumatism and gout.
  3. People with osteoporosis and other abnormalities
  4. People with circulatory system disorders (heart disease, vascular disorders, hypertension, etc.).
  5. People with respiratory disorders.
  6. Those who are using artificial rhythm regulators or implantable medical electronic instruments.
  7. People with malignant tumors.
  8. People with blood circulation disorders such as thromboembolism or serious lipoma, acute lipoma, or various skin infections.
  9. People with perceptual impairment caused by high peripheral circulation disorder caused by diabetes, etc.
  10. People with skin injuries.
  11. People with high fever due to illness (38 ° C or above).
  12. People with abnormal or bent back bones.
  13. People who are pregnant or may be pregnant or are in menstruation.
  14. People who feel abnormal and need to rest.
  15. People with obvious poor physical condition.
  16. Users for rehabilitation purposes.
  17. People who feel particularly abnormal except for the above.
      — May cause accidents or poor physical conditions.
      • When you feel low back pain, numbness of legs and feet, dizziness, heartbeat and other abnormalities during exercise, please stop using and consult the doctor.
      • Don’t let children use this product or play around it.
      — To avoid injury
      • The protector of children should be careful not to let children play with this product.
      — To avoid injury
      • Please make sure that there are no people or pets around (at the back, bottom and front of the product) during use or when loading, unloading and sliding the product.

FORBIDDEN!

• Please do not use this product when the shell is cracked or fallen off (the internal structure is exposed) or when the welding part falls off.
  — To avoid accidents or injuries.

• Do not jump up or down during exercise.
  — To avoid injury due to falls.

• Please do not use it or keep it in damp places such as outdoors and near bathrooms, or in places where you may be exposed to water.

• Please do not use or keep it in direct sunlight, high-temperature places such as around the stove, or on heating appliances such as electric heating carpets.
  — To avoid electric leakage or fire.

• Do not use it when the power cord or power plug is damaged or the plug of the socket is loose.
  — To avoid electric shock, short circuit and fire.

• Do not damage or forcibly bend or twist the power cord, or place heavy objects on it to prevent the cord from being clamped.
  — To avoid fire or electric shock.

• Do not use it by two or more people at the same time, and do not let people around get close to it during use.
  — To avoid accidents or injuries due to falls.

• Do not allow operators who cannot express their awareness to use this product.
  — To avoid accidents or injuries.

DO NOT DISASSEMBLE!

• Absolutely no disassembly, repair, modification.
  — To avoid injury due to mechanical failure.

NO CONTACT WITH WATER!

• The main body or operating part shall not be exposed to water or other conductive liquids.
  — To avoid electric shock and fire.

FORBIDDEN!

• It is recommended that people who lack exercise at ordinary times should not suddenly take strenuous exercise.

• Do not use it after eating, when you are tired, just finished exercising, or when you are not physically strong.
  — To avoid damage to health.

• This product is only suitable for families and should not be used by a large number of unspecified users such as schools and gyms.
  — To avoid injury.

• Do not use it while eating or doing other activities.

• Do not use it when you are feeling dull after drinking.
  — To avoid accidents or injuries.

• Do not use it when the pants are filled with hard objects.
  — To avoid accidents or injuries.

• Do not attach pins, garbage or impurities to the power plug.
  —To avoid electric shock, short circuits and fire.

• Do not unplug the power plug or switch the power switch to “OFF” during use.
  —To avoid injury.

DO NOT DO NOT USE WITH WET HANDS!

• Do not pull out or insert the power plug with wet hands.
  —To avoid electric shock and injury. UNPLUG THE POWER PLUG!

• Please unplug the power plug from the socket when it is not in use.
  —Dust and moisture will degrade the insulation, causing electric leakage or fire.

• Please unplug the power plug from the socket during maintenance.
  —To avoid electric shock or injury.

• Please stop using the product when it is not started or abnormal, and immediately pull out the power plug and entrust a professional for maintenance.
  —To avoid electric shock or injury.

• Please pull out the power plug when the power is cut off.
  —To avoid accidents or injuries when power is restored.

• Please do not pull the wire to pull out the power plug.
  —To avoid short circuit, electric shock and fire.

GROUNDING INSTRUCTIONS!

• The product must be grounded. When the machine functions abnormally, grounding will provide the current with the most resistant channel to reduce the risk of electric shock.
• The product is equipped with wires with equipment grounding conductors and grounding plugs. The plug must be plugged into a properly installed and grounded socket in full accordance with local laws and regulations.

DANGER!

• Improper connection of equipment grounding conductor may cause electric shock. When you have doubts about whether the grounding of the product is correct, please entrust a professional electrician to check. Even if the plug attached to the product does not match the socket, it cannot be modified. Please entrust a professional electrician to install the appropriate socket.
• The product is equipped with a grounding plug Please confirm that the product is connected to the appropriate socket. The product can not use the conversion socket.

Product Description

Packing list:

Technical parameters:

Attached table (list of accessory boxes):

Installation Procedure

1. Take the host out of the packing box and place it flat on the carpet or cushion, As shown in step below, pull the pin knob outward (to prevent scratching the treadmill).
2. As shown in step’2) below, lift the column upward, hold the column in one hand, and rotate the pin knob toward the front of the treadmill when the pin knob is dose to the limit point as shown in step 3 below, and then push the column to the front of the treadmill to snap the pin into the limit point.
3. As shown in step (5, below, rotate the electronic meter holder to the horizontal position (pay attention to the communication line in the right riser to prevent crushing) and lock the electronic meter holder to the left and right risers with the two “M6 plum knobs” as shown in step 16:. As shown in step 7., adjust the electronic meter to proper position. as shown in step ‘8,, place the red safety lock in the yellow position of the electronic m-eter stand, and clip the end with the clip to your clothes when running.
4. As shown in step 9 of the figure below, plug the power cord into the front socket of the treadmill, turn on the power, open the power switch under the front of the machine and enter the standby state.
5. If the ground is uneven or the treadmill is shaking, please adjust the four adjustable foot pads at the bottom of the treadmil to appropriate positions.(as shown on the right)
   Note: After the installation of the machine is completed, please check again whether all the bolts have been locked.

Folding instructions

1. As shown in step 1 on the right, unscrew the “M6 plum knob” on the left and right risers and slowly lower the electronic meter stand.
2. As shown in step 2 and then rotate torotate the pull pin under the left and right column to pull out the limit point the end of the treadmill.
3. As shown in step  3 put the electronic meter stand and the left and right risers down slowly onthe running table.
4. Folding is completed as shown in figure iA) below.

Sports Suggestions and Policies

Warm up
Please warm up for 5-10 minutes before each exercise.
Breathing
Do not hold your breath during exercise. It is recommended that you inhale with your nose and exhale with your mouth when you are ready to restore. Breathing and movement should be co-ordinated. If you breathe too fast, you should stop exercising immediately.
Frequency
The training of muscles in the same part should have a 48-hour rest, that is, the same part can be trained every other day.
Load
Please determine the amount of training according to your physical condition, and then practice according to the principle of gradual progress. Muscle soreness is a normal phenomenon at the beginning of training, and can be eliminated as long as you continue to practice.
Relax
Please do 5 minutes of release action after each exercise, especially the stretching and relaxation of the foot muscles, so as to prevent the muscle from clotting and maintain the muscle elasticity.
Diet
Please take exercise one hour after meals to protect your digestive system; Do not eat until half an hour after exercise. Drink less water during exercise. Do not drink too much water to avoid i-ncreasing the burden on the heart and kidneys.
Stretching Exercise
No matter how fast you exercise, please do stretching exercises first. Warm muscles are easier to stretch, so please walk for 5-10 minutes to warm up. Then stop and stretch for 5 times as follows, 10 seconds or more for each leg; Do it again after the exercise.

1. Stretch down
   Bend your knees slightly, bend forward slowly, relax your back and shoulders, and touch your toes with your hands as much as possible. Hold for 10-15 seconds, then relax. Repeat 3 times (see Fig. 1).

2. Hamstring stretch
   Sit on a clean cushion, straighten one leg and pull the other leg inward to make it close to the inner side of the straight leg. Try to touch your toes with your hands. Hold for 10-15 seconds, then relax. Repeat 3 times for each leg (see Fig. 2)

3. Calf and heel tendon stretch
   Stand on the wall or tree with both hands, one foot behind, keep the back leg upright and the foot following the ground, and lean towards the wall or tree. Hold for 10-15 seconds, then relax. Repeat 3 times for each leg (see Fig. 3).

4. Quadriceps stretch
   Hold the wall or table with your left hand to maintain balance, then extend your right hand backward to grasp your right ankle and slowly pull it towards your hip until you feel the muscles in front of your thigh are tense. Holdfor 10-15 seconds, then relax. Repeat 3 times for each leg (see Fig. 4).

5. Sartorius muscle (muscle inside leg) stretch
   Keep the soles of your feet facing each other and sit with your knees out. Grasp your feet and pull them toward your groin. Hold for 10-15 seconds, then relax. Repeat 3 times (see Fig. 5).

Operating Instructions

Safety Lock Function
!When the safety lock is pulled off in any state, “E07” is displayed in the window, and the buzzer BI-BI-BI is displayed continuously. If the motor is running, it will stop in an emergency. When the safety lock is disengaged, operations such as start cannot be performed.
How to use the treadmill

1. Turn on the power and check whether the machine is normal.
2. The running speed of this machine is 0.6-7.6 MPH.
3. Clip the safety lock on the chest of the exerciser.
4. Please check the stability and function of the treadmill before exercise. It is strictly forbidden to start the treadmill while standing on the running belt. Before running, you should stand on the left and right bars and hold the treadmill. After starting normally, you can step on the tre-admill. When turning on the machine, hold the handrail in one hand and press the “Start” b-utton on the electronic meter. The treadmill will start with a 3-second delay and run at a spe-ed of 0.6 mph. Press “+” to increase the motor speed to 1.6 to 2.2 mph (this is the most com-fortable speed for learning to run),hold the handrail in both hands and step onto the running belt with both feet one after another, and you will soon be able to reach the same speed as the running belt.
5. After several minutes, you can increase the running speed by pressing the “+” button of the electronic meter to slowly increase the speed; you can also press the “-” button to decrease the speed.
6. When you need to pause during the exercise, you can press the “Pause/ Continue” button of the electronic meter at any time to stop the motor, and press the “Pause/ Continue” button of the electronic meter when you need to continue the exercise.
7. The motor can be stopped at any time during the exercise by pressing the “Stop” button of the electronic meter.
8. Press the “3, 6” speed button directly at any speed during operation, and the running speed will be the relative speed value of the button.

Note: If the safety lock is pulled off during exercise, the treadmill will stop running immediately, the electronic meter will refuse any operation, and “E07” will be displayed in the window.
Display and Button Distribution:

1. The following functions are displayed in the LED window: Two windows display: time and speed are displayed in turn. Distance and Calorie are displayed in turn. Time display range: 0:00-99:59
   Speed display range: 0.6-7.6
   Distance display range: 0.00-99.99
   Calorie display range: 0-9999

2. Electricity meter function buttons: 3, 6, Speed +, Speed -, Start/Stop Pause/Stop
   A. 3: Press this speed selection button at any speed during operation to adjust the running belt speed to 3 mph.
   B. 6: Press this speed selection key at any speed during operation to adjust the running belt speed to 6 mph.
   C. +: Press this button to increase the speed during exercise.
   D. -: Press this button to reduce the speed during exercise.
   E. Pause/Continue: During exercise, the button will slow down and stop, and the exercise data will be paused. Pressing Pause/Continue in the stopped state will start the treadmill; the exercise d-ata will be superimposed on the previous frame data.
   F. Start: Pressing the Start/Stop button while in a stopped state starts the treadmill;
   G. Stop: Pressing the Start/Stop button while in the running state to slow down and stop the treadmill.

Starting Instructions

1. Stick the safety lock to the safety lock position on the panel, turn on the power switch, the buzzer will beep, and the system will enter the standby mode.
2. Press the “Start” button, the window will display a 3-second countdown, and the buzzer will sound once for each deceleration before the system starts.
3. The start speed is 0.6 mph, and the speed can be adjusted by pressing the Speed + or – button.

FAQ

Please contact the dealers or our after-sales service for any questions.

and signal line
Burn fuse| Replace fuse
Running belt doesn’t run smoothly| Insufficient lubrication| Add methyl silicone oil lubricant
Tight running belt| Adjust the running belt
Running belt slipping| Loose running belt| Adjust the running belt
Loose belt| Adjust the belt

Error message display and troubleshooting

off. If it does not fall off, check whether the carbon brush of the motor is worn out. If it is worn out, replace the motor. If it is not worn out, replace the electric control.
0.00E+00| No sensing signal| Reconnect the induction wire
0.00E+00| Abnormal controller or motor| Abnormal controller or motor
Replace the controller and motor when the load is too large
0.00E+00| Overload protection| Replace the electric control when the load is too large
0.00E+00| System self-test failed| Replace the electric control in case of system failure
0.00E+00| The safety lock is not inserted| Insert the safety lock into the lock position
Abnormal display| External interference| Turn off the power switch, and then turn on the power for operation after 1 minute

Maintenance

VII. Maintenance
Proper maintenance will help keep your treadmill in the best condition. Improper maintenance will damage or shorten the service life of the treadmill.
a. Regular inspection is required due to wear and damage; Worn or damaged accessories, such as motor, electric control, power cord, and running belt, are safe to use after professional maintenance.
b. Please replace the defective parts immediately or reduce the idle of the equipment until it is repaired; (such as power cord)
c. Pay special attention to the most easily worn components; (such as running belt)
d. Please have the power cord replaced by the manufacturer, its maintenance department or similar department when it is damaged to avoid danger.
1.Lubrication The running belt must be lubricated with methyl silicone oil specially configured after a period of use.
Suggestion:

• When the treadmill is used for less than 3 hours a week, it is recommended to lubricate it once every 5 months.

• When the treadmill is used for 4-7 hours every week, it is recommended to lubricate it once every 2 months.

• When the treadmill is used for more than 7 hours every week, it is recommended to lubricate it once a month. Please lubricate the product with proper lubricant. Remember: reasonable lubrication is an important factor to improve the life of the treadmill.
  2.When checking whether lubricant is needed, please grab the running belt and touch the center of the back of the running belt with your hand as far as possible. If your hand is stained with silicone (a little damp), it means that you do not need to add lubricant. If the running board is dry and there is no methyl silicone oil in it, you need to add lubricant.

• Steps of applying lubricant to the running board: (as shown in the right figure)

• Stop the running belt and fold the machine;

• Lift the running belt at the bottom of the host; Extend the oil pot as far as possible to the middle of the running belt, spray methyl silicone oil on the inner side of the running belt, and apply both sides of the running belt with methyl silicone oil;

• Run the treadmill at the speed of 0.6mphto evenly apply methyl silicone oil, and gently step on the running belt from left to right, which can make methyl silicone oil completely absorbed by the running belt for about minutes. 3. Running belt adjustment:
  All treadmills shall be adjusted in the running belt . before and after installation, but they may still loose after a period of use. If the user stops and slips during running, adjust the adjusting bolts of the running belt clockwise in half a circle. if the running belt is too loose, the running belt and the roller will slip, but if it is too tight, it will easily increase the load of the motor and damage the motor, running belt and roller.
  4. Running belt deviation adjustment:
  All treadmills shall be adjusted in the running belt before and after installation. However, deviation may still occur after the running period. The causes are as follows:

1. The treadmill is placed unevenly.
   2.) The user’s feet are not in the center of during exercise.
   3.)Uneven strength of the legs.

 The deviation phenomenon caused by human can be restored to normal after idling for a minute. For the deviation phenomenon that cannot be restored to normal, a 6mm hex wrench can be used to adjust it in half a circle.
When the running belt deviates to the left, adjust the left bolt clockwise or adjust the right bolt counter-clockwise.
When the running belt deviates to the right, adjust the right bolt clockwise or adjust the left bolt counter-clockwise. Prompt: The running belt deviation is not within the scope of warranty, and can be maintained by the user according to the manual. The running belt deviation will seriously damage the running belt, and it must be found and corrected in time.
VIII. Service Commitment Warranty
We provide statutory warranty service in the country where you purchased the product. Regulatory compliance and, full-text Supplier DoC areis available on the official website. Please check out our official website to learn more: www.mobvoi.com/products Please contact us if you experience any problems. Customer service: support@mobvoi.com The limited warranty applies to the T4011 G4011 electric treadmill. Within the warranty period of normal use, such as non-human damage, Mobvoi can provide users with free accessories. After the expiration of the warranty period, preferential prices for spare parts may be offered to previous buyers. Manufacturer: Jiangxi EQi Industrial Co., Ltd
This manual is for reference only, please refer to the actual product!
Proof of original purchase is required.
When ordering replacement pads please have the following information ready:

1. Order Number 2. Description of Parts(Add photos or videos would be helpful)
2. Part Number 4. Date of purchase

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Manufacturer: Jiangxi EOi Industrial Co., Ltde
Address: Luliang Road. Yining Town, Xiushui
County. Jiujiang City, Jiangxi Provincee
MADE IN China

Documents / Resources

| EQi Industrial T4020 Household Electric Treadmill [pdf] User Manual
S7, 2A4NH-S7, 2A4NHS7, T4020 Household Electric Treadmill, T4020, Household Electric Treadmill, Electric Treadmill, Treadmill
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>