BOSCH BHU3200 Intuvia 100 Display Smart System Instruction Manual
- June 9, 2024
- Bosch
Table of Contents
BOSCH BHU3200 Intuvia 100 Display Smart System
Safety instructions
Read all the safety information and in-structions.
Failure to observe the safety information and follow instructions may result
in electric shock, fire, and/or serious injury.
Save all safety warnings and instructions for future reference.
The term battery is used in these instructions to mean all original Bosch
eBike rechargeable battery packs.
- Read and observe the safety warnings and directions contained in all the eBike system operating instruc-tions and in the operating instructions of your eBike.
- Do not attempt to secure the display or operating unit while riding.
- Do not allow yourself to be distracted by the onboard computer’s display. If you do not focus exclusively on the traffic, you risk being involved in an accident. If you want to make entries in your onboard computer other than switching the assistance level, stop and enter the appropriate data.
- Do not use your smartphone while riding. If you do not focus exclusively on the traffic, you risk being involved in an accident. Only enter the relevant data having stopped first.
- Set the display brightness so that you can adequately see important information such as speed and warning symbols. Incorrectly set display brightness may lead to dangerous situations.
- Do not open the onboard computer. Opening the onboard computer may damage it beyond repair and void any warranty claims.
- Do not use the onboard computer as a handle. Lifting the eBike up by the onboard computer can cause irreparable damage to the onboard computer.
- Do not stand your bicycle upside down on its saddle and handlebars if the onboard computer or its holder protrudes from the handlebars. This may irreparably damage the onboard computer or the holder. Also remove the onboard computer before placing the bicycle on a wall mount to ensure that the onboard computer does not fall off or become damaged.
- Caution! When using the onboard computer with Bluetooth® and/or WiFi, interference can occur with other devices and equipment, aircraft and medical devices (e.g. pacemakers, hearing aids). Likewise, injury to people and animals in the immediate vicinity cannot be excluded entirely. Do not use the onboard computer with Bluetooth® in the vicinity of medical devices, petrol stations, chemical plants, areas with a potentially explosive atmosphere or on blast sites. Do not use the onboard computer with Bluetooth® in airplanes. Avoid using the onboard computer near your body for extended periods.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bosch eBike Systems is under license.
- The onboard computer is equipped with a wireless interface. Local operating restrictions, e.g. in aero-planes or hospitals, must be observed.
Safety instructions for coin cells
- WARNING! Ensure that the coin cell is kept out of the reach of children. Coin cells are dangerous.
- Coin cells must never be swallowed or inserted into any other part of the body. If you suspect that someone has swallowed a coin cell or that a coin cell has entered the body in another way, seek medical at-tention immediately. Swallowing coin cells can result in severe internal burns and death within two hours.
- Ensure that coin cell replacement is carried out prop-erly. There is a risk of explosion.
- Only use the coin cells listed in this operating manual. Do not use any other coin cells or other forms of electrical power supply.
- Do not attempt to recharge the coin cell and do not short-circuit the coin cell. The coin cell may leak, explode, catch fire, and cause personal injury.
- Remove and dispose of drained coin cells correctly. Drained coin cells may leak and cause personal injury or damage to the product.
- Do not overheat the coin cell or throw it into the fire. The coin cell may leak, explode, catch fire, and cause personal injury.
- Do not damage the coin cell and or take the coin cell apart. The coin cell may leak, explode, catch fire, and cause personal injury.
- Do not allow damaged coin cells to come into contact with water. Leaking lithium may mix with water to create hydrogen, which could cause a fire, an explosion, or per-sonal injury.
- Only for Australia
Caution!
The battery is hazardous and is to be kept away from children (whether the
battery is new or used). The battery can cause severe or fatal injuries in 2
hours or less if it is swallowed or placed inside any part of the body.
Medical attention should be sought immediately if it is suspected the battery
has been swallowed or placed inside any part of the body.
Privacy notice
If the onboard computer is sent to Bosch Service because it requires
servicing, the data stored on the onboard computer may be transmitted to
Bosch.
Product Description and Specifications
Intended Use
The Intuvia 100 onboard computer is designed to display cycling data.
To access the full functionality of the eBike system and Intuvia 100 onboard computer, you will need a compatible smartphone installed with the eBike Flow app (available from the Apple App Store or the Google Play Store), e.g. for
Product Features
The numbering of the components shown refers to the illustrations on the graphics pages at the beginning of the manual.
- Bluetooth® button
- Battery compartment cover
- Locking screw support
- On-board computer contact
- Reset button
- Locking screw for the on-board computer
- Holder for the on-board computer
- On-board computer cradle
- On-board computer
- Rubber seal
- Non-rechargeable battery (coin cell type CR2450)
- Slotted screwdriver)
- Battery compartment
- Holder fastening screw
- Not included in the scope of delivery
Display Elements of On-Board Computer
- (a) Battery charge indicator
- (b) Bike lights display
- (c) Assistance level indicator
- (d) Drive unit assistance indicator
- (e) Unit indicator
- (f) Text indicator
- (g) Navigation bar
- (h) Value Indicator
- (i) Speedometer
Technical Data
On-board computer Intuvia 100
| Product code | BHU3200 | |
|---|---|---|
| Operating temperature A) | °C | −5 to +40 |
| Storage temperature | °C | +10 to +40 |
| Battery | 1× CR2450 | |
| Protection rating | IP54 | |
| --- | --- | --- |
| Weight, approx. | g | 63 |
Bluetooth® Low Energy 5.0
| – Frequency | MHz | 2400–2480 |
|---|---|---|
| – Transmission power | mW | ≤ 1 |
- Temperatures outside of this range may cause faults in the display.
The license information for the product can be accessed at the following
Internet address:
http://www.bosch-ebike.com/licences.
Declaration of Conformity
Robert Bosch GmbH, Bosch eBike Systems, hereby declares that the Intuvia 100 radio communication unit complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available to view at the following website: https://www.bosch-ebike.com/conformity.
Robert Bosch GmbH, Bosch eBike Systems, hereby declares that the Intuvia 100
radio communication unit complies with the Radio Equipment Regulations 2017
(SI
2917/1206). The full text of the UK Declaration of Conformity can be accessed
at the following Internet address: https://www.bosch-ebike.com/conformity.
Assembly
Inserting and removing the on-board computer (see figure A)
To insert the onboard computer, insert the lugs of the battery compartment
(13) into the cradle (8) of the holder, and press the onboard computer gently
down. To lock, turn the onboard computer clockwise until it engages.
To remove the onboard computer (9), turn it anticlockwise and remove the onboard computer from the cradle (8).
- Remove the onboard computer when you park the bike.
Inserting the locking screw (see figure B)
The onboard computer can be secured in place to prevent it from being removed
from the holder. The onboard computer must be in the holder for this. Undo the
fastening screw (14) of the clamp with a hex key until the holder (7) can be
moved. Turn the holder (7) until the bottom side of the onboard computer is
accessible. Insert the locking screw (6) and bolt it to the onboard computer.
Align the holder (7) correctly with the onboard computer and tighten the
fastening screw (14) again with a hex key.
Please note: The locking screw is not designed to prevent theft.
Operation
Connection of the On-Board Computer with the eBike System (Pairing)
Your onboard computer is generally already connected to the eBike system. If
this is not the case, proceed as follows:
- Install the eBike Flow app.
- Activate Bluetooth® on your smartphone and open the eBike Flow app.
- Briefly press the Bluetooth® button.
- The device identification is shown on the display.
- Select the required tool with the same identification in the eBike Flow app.
You can find further information at the following link:
https://www.bosch-ebike.com/de/help-center/intuvia-100.
Depending on the smartphone’s operating system, the eBike Flow app can be downloaded free of charge from the Apple App Store and the Google Play store.
Use your smartphone to scan the code in order to download the eBike Flow app.
Switching the on-board computer on/off
Switch on the eBike system. To switch on the onboard computer, gently move the
eBike or tap the display.
The following options are available for switching off the on-board computer:
-
Press the ON/OFF button on the operating unit to switch off the eBike system.
The onboard computer is also switched off. -
Remove the onboard computer from its holder.
The onboard computer switches off automatically after 60 seconds.
Power supply for the on-board computer
The onboard computer is provided with energy by the CR2450 coin cell.
Changing the non-rechargeable battery (see figure C)
When the non-rechargeable battery of the onboard computer is nearly drained,
you’re shown a corresponding message on the display. Open the battery
compartment
cover (2) with a slotted screwdriver (12), remove the used non-rechargeable
battery, and insert a new non-rechargeable battery of type CR2450. You can
obtain the non-rechargeable batteries recommended by Bosch from your bicycle
dealer.
When inserting the non-rechargeable battery, ensure that the rubber seal (10) is correctly positioned. Seal the battery compartment and slide the onboard computer onto the holder.
Battery charge indicator
The onboard computer shows the state of charge of the eBike rechargeable
battery in a percent. A notification is displayed once when the battery’s
state of charge falls below 30%, and again when it falls below 10%. The
notification can be confirmed, or it simply disappears after 5 s.
Operation
The Bluetooth® (1) button has various functions. If the onboard computer was
connected with an operating unit and has been removed from the holder, the
displays can be switched within 60 s. To do so, briefly press the Bluetooth®
(1) button.
Note:
If you are not going to be using your bike for several weeks, remove the
onboard computer from its holder and set the onboard computer to storage mode.
To do so, press the Bluetooth® (1) button for 8–11 s.
The reset button (5) serves to reset the onboard computer to factory settings and delete all connections. The onboard computer can be operated and the indicators can be controlled via one of the depicted operating units. The meaning of the buttons on the operating units for the display indicators can be found in the following overview. Depending on how long it is pressed, the select button has 2 functions.
LED Remote
Mini Remote
- Scroll right (only for LED Remote)
- Increase assistance level
- Decrease assistance level
- Select the button (press briefly)
- Select the button (press and hold > 1 s)
Please note: All screenshots showing the display and text on the following pages are from the approved software version. The display and/or text may change slightly following a software update.
Note:
Depending on the lighting conditions, there is background lighting that is
only activated by pressing a button. The lighting duration can be adjusted.
Displays and settings of the onboard computer
Speed and distance indicators
The speedometer always displays the current speed. You can choose from the
following functions in the function display (combination of text indicator and
value indicator):
- Distance: Distance traveled since the last reset
- Riding time: Journey time since the last reset
- Time: Current time
- Range: Estimated range of the available battery charge (at constant conditions such as assistance level, route profile, etc.)
- Avg. Speed: Average speed achieved since the last reset
- Max. Speed: Maximum speed achieved since the last reset
- Total distance: Total distance traveled with the bike (cannot be reset)
Note:
The onboard computer automatically displays a gear change recommendation when
riding the bike. The display of the gear change recommendation is superimposed
over the text display (f) of the onboard computer and can be deactivated
manually via the basic settings.
Switching Between Display Functions
- Press the or button until the required function is displayed.
- Press the select button until the required function is displayed.
Certain settings cannot be assumed on the on-board computer, but only in the eBike Flow app, e.g.:
In addition, you receive an overview of the operating hours and the installed components in the eBike Flow app.
Displaying/adjusting basic settings
Note:
The settings menu cannot be called up while riding. To get to the basic
settings menu, press the select button on the operating unit until
Switching/Leaving Basic Settings
- Press the or button until the required function is displayed.
- Press the select button until the required function is displayed.
Note:
The changed setting is automatically saved upon leaving the respective basic
setting.
Changing Basic Settings
- To scroll down, briefly press the select button until the required value is displayed.
- To scroll down, press the select button > 1 s until the required value is displayed.
Note: Pressing and holding the relevant button switches automatically to the next value in the basic settings.
You can choose between the following basic settings:
- Language: You can select your preferred system language here.
- Units: Displaying the speed and distance in either kilometers or miles.
- Time: You can set the time here.
- Time format: Displaying the time in 12-hour or 24-hour format.
- Shift recommendation: You can choose whether or not to have a prompt displayed when it is recommended that you change gears.
- Backlight: You can set the duration of the background lighting here.
- Brightness: The brightness can be adjusted in steps of 5% from 5–100%.
- Settings reset: You can reset the settings by pressing and holding the select button here.
- Certifications
- Back: You can leave the settings menu with this function.
Leaving the Basic Settings Menu
You leave the basic settings menu automatically if you are inactive for 60 s
or start riding the bike, or by using the
- Briefly press the select button to leave the basic settings menu using the
function. - Press the select button > 1 s to leave the basic settings menu using the
function.
Maintenance and servicing
Do not clean any of the components with pressurized water. Keep the screen of your onboard computer clean. Dirt can cause faulty brightness detection.
Clean your onboard computer using a soft cloth dampened only with water. Do not use cleaning products of any kind. Have your eBike system checked by an expert at least once a year (including mechanical parts, and up-to-date system software).
In addition, the bicycle dealer may base the service date on the distance traveled and/or on a period of time. In this case, the onboard computer displays a message telling you when the service date is due each time it is switched on.
Please have your bike serviced and repaired by an authorized bicycle dealer.
- Have all repairs performed only by an authorized bike dealer.
Note:
If you are handing in your eBike to a bicycle dealer for maintenance, it is
recommended that you temporarily deactivate the
After-sales service and advice on using products
If you have any questions about the eBike system and its components, contact
an authorised bicycle dealer. For contact details of authorised bike
dealerships, please visit www.bosch-ebike.com.
Transport
- If you transport your eBike attached to the outside of your car, e.g. on a bike rack, remove the onboard computer and the eBike battery to avoid damaging them.
Disposal
The drive unit, onboard computer incl. operat-ing unit, battery, speed
sensor, accessories, and packaging should be disposed of in an environmentally
correct manner. Check that your personal data has been deleted from the
device.
Do not dispose of eBikes and their components with household waste.
In accordance with Directive 2012/19/EU and Directive 2006/66/EC respectively, electronic devices that are no longer usable and defective/drained batteries must be collected separately and recycled in an environmentally friendly manner.
Please return Bosch eBike components that are no longer usable free of charge to an authorised bicycle dealer or to a recycling facility.
Subject to change without notice.
Documents / Resources
|
BOSCH BHU3200 Intuvia 100 Display Smart
System
[pdf] Instruction Manual
BHU3200 Intuvia 100 Display Smart System, BHU3200, Intuvia 100 Display Smart
System, Display Smart System, Smart System
---|---
References
- Bosch eBike Systems | Premium eBike systems & smart features - Bosch eBike Systems
- Licences Products - Bosch eBike Systems
- Declaration of conformity - Bosch eBike Systems
- Intuvia 100 – Help Center - Bosch eBike Systems
- Licences Products - Bosch eBike Systems