AYAERI J11 Wireless Earbuds Instructions

AYAERI J11 Wireless Earbuds Instructions

INSTRUCTION

Earbuds Specification

Charging Case Specification

PLEASE NOTE:

1. Once connected to a Bluetooth device, pairing will be performed automatically the next lime you open the charging case.
2. If the earbuds have not connected to any Bluetooth devices, they will automatically turn off.
3. When using for the first lime or after not using for a long time, please charge the charging case for about 2 hours.

CONNECT TO BLUETOOTH DEVICES

Take the earbuds out of the charging case, the power will automatically turn on and the earbuds prom pt “Power ON”.

While the pairing of the left and right earbuds is completed, the earbuds beep once.

Connect to the device of “J11″in the smartphone’s Bluetooth settings. (While the connection is completed, earbuds prompt “Connected”)

CHARGING

The Operations of Earbuds

POWER ON :

1. Take out the earbuds from charging case, they will automatically turn on;
2. Long press each of the touch sensor of earbuds for about 3 seconds.

POWER OFF :

1. Put the earbuds into the charging case directly, the power will turn off;
2. Long press either of the touch sensors for about 3 seconds;
3. Leave the earbuds in paring mod(unparied) for about 3 minutes ;

Play/Pause/Answer/Hang up : Press either of the touch sensors once.
Reject the phone call/Voice assistant : Long press either of the touch sensors for about 3 seconds;
Next song/Previous song: Double-press/ Triple-press either of the touch sensors.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off  and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from  that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for  help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>