PHILIPS 2757805 Fluorescent Lamp Installation Guide
- June 9, 2024
- Philips
Table of Contents
PHILIPS 2757805 Fluorescent Lamp Installation
Installation Guide
Philips LEDtube lnstantFit
Please take the time to read this installation guide. The guide contains
important information and notes regarding the installation and operation.
IMPORTANT!
- Always switch off the power supply before commencing work!
- Only to apply in dry indoor usage and environments, outdoor applications requires an IP rated fixture.
- Do not change the fixture or any components of the LEDtube to ensure safety.
- Philips LEDtube is designed to fit in standard IEC compliant G 13 bi-pin lampholders
- Philips LEDtube should be installed by qualified professionals in accordance with relevant electrical codes.
- Any constructive change of the luminaire in case of applying retrofrt LED lamps shall not be pemnitted.
- For applications which contains emergency and or explosive proof luminaires please consult your local Philips distribution for more infomnation
- This lamp is not suitable to be used in emergency luminaires designed for double-capped florescent lamp(s)
DISCLAIMER
Signify disclaims liability for any direct, indirect or incidental damages in
case of installation perforTned either not according to this guide or not
perforTned by a professional electrician.
Note: Philips LEDtube lnstantFit is compatible with most electronic ballasts in the market. For best compatibility results; please visit http://www.lighting.philips.com/main/products/led-tube for further information.
SYMBOL
Warning
- No modifications of the luminaire which the LED lamp is to be used with are to be made.
- This lamp may not be suitable for use in all applications where a traditional fluorescent lamp has been used. The temperature range of this lamp is more restricted. In cases of doubt regarding the suitability of the application the manufacturer of this lamp should be consulted.
- This lamp is designed for general lighting service (excluding e.g. explosive atmospheres).
© 2019 Signify Holding
Signify
All rights reserved. Reproduction in whole or in part is prohibited without
the prior written consent of the copyright owner. The information presented in
this document does not form part of any quotation or contract, is believed to
be accurate and reliable and may be changed without notice. No liability will
be accepted by the publisher for any consequence of its use. Publication
thereof does not convey nor imply any license under patent or other industrial
or intellectual property rights.
06/2019
www.philips.com/lighting