Lighting EVER 901001-US-4-A Smart WiFi Light Bulbs User Manual

Lighting EVER 901001-US-4-A Smart WiFi Light Bulbs

Application

Install the light

Turn on the phone’s Bluetooth and connect to the WiFi network.

Does not support manual dimmer.

Follow the on-screen steps to finish the setup

Reset the light before pairing

How to reset the light

1. Switch on the light and keep it on for at least 10s. Then turn it off for 4-5s, go to the next step.

2. Make sure the light blinks rapidly, if not: Turn the light ON-OFF-ON-OFF-ON (Leave 1-2s between the off and on positions.)

3. Wait for 2-3s until the light blinks rapidly.

LE Innovation Inc

3651 Lindell Rd Ste D, Las Vegas, NV 89103, USA www.lepro.com +1 866-287-2558 cs.oc@lepro.com

Set up Voice Control (Optional)

Method A

Method B

Please Note: If the light does not work, please go to Amazon Alexa or Google Home APP and click DISCOVER DEVICES.

Automation & Timer (Optional)

SKU’s

• PR901001-UK-4-a

Smart Lighting Holding Limited claims SKUs* meet the Radio Act 2014/53/EU. A complete Declaration of Conformity can be downloaded with this link:

https://www.lepro.com/docs/

FCC

Federal Communication Commission (FCC) Statement for Users
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Disposal

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.

FAQs

How to connect to the WiFi network?****

Please follow the steps below:
1.      Turn on the light and keep it on for at least 10s.
2.      Turn off the light for 4-5s, and go to the next step.
3.      Make sure the light blinks rapidly, if not: Turn the light ON-OFF-ON- OFF-ON (Leave 1-2s between the off and on positions.)
4.      Wait for 2-3s until the light blinks rapidly.
5.      Go to your phone’s WiFi setting page, search for a new WiFi network named “LEpro” or “Lepro901001” and connect to it.

How to reset the light?****

Please follow the steps below:
1.      Switch on the light and keep it on for at least 10s. Then turn it off for 4-5s, go to the next step.
2.      Make sure the light blinks rapidly, if not: Turn the light ON-OFF-ON- OFF-ON (Leave 1-2s between the off and on positions.)
3.      Wait for 2-3s until the light blinks rapidly.

What are some facts about smart bulbs?****

Smart light bulbs are wirelessly controllable lighting fixtures that you may operate with a remote. 1 As a result, you may manage them from other rooms or even set up various lighting arrangements that change depending on the time of day. In addition to lasting longer and using less energy, smart light bulbs are also more effective.

Do smart bulbs need to be connected to Wi-Fi?****

Wi-Fi-capable smart lights use wireless networks to connect to the internet. To connect wirelessly, certain smart light bulbs need a specific smart hub, which must be plugged into an internet network. The hub also works as a bridge between the smart light and your phone or tablet.

How long do smart Wi-Fi bulbs last?****

The lifespan of first-generation smart lights is up to 15,000 hours, compared to 25,000 hours for second and third-generation lights.

What is the benefit of a Wi-Fi bulb?****

Compared to other smart home modifications, smart lights are cheaper and easier to install. As compared to incandescent lights, these LEDs can save up to six times as much energy. The long-term cost of switching to these bulbs is low because they can operate for over 25,000 hours.

Do smart bulbs save energy?****

Smart bulbs are far more energy-efficient than incandescent lamps since they are made of LEDs. Well, absolutely, if you contrast smart lights to incandescent.

Do smart bulbs use more power?****

Energy efficiency: Smart bulbs consume less energy since they don’t produce as much heat as conventional incandescent lights do. They also have a 25-fold increase in lifespan over conventional bulbs.

How many devices can connect to a smart bulb?****

One phone, tablet, or another device can only be connected to this Bluetooth light bulb at a time.

Can I use a smart bulb without a smart switch?****

Smart bulbs may operate exactly like regular lights since they can be controlled by your standard light switch. This also implies that your smart bulb cannot be remotely operated by an app if your light switch is off.

Do smart bulbs need to be on all the time?****

Yes. If you want a remote-control, always-connected light bulb, power will be required to keep the connection going.

Are smart bulbs dimmable?****

One of the fundamental characteristics of smart bulbs is that many of them may be dimmed without the need for dimmer switches to be installed in your house. You may easily dim or brighten your lamps or chandeliers by screwing in a dimmable smart bulb and using the associated app.

Product Video

Download The PDF Link;Lighting EVER Smart WiFi Light Bulbs pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>