POTTER FFT-TC Telephone Storage Cabinet Instruction Manual
- June 9, 2024
- POTTER
Table of Contents
POTTER FFT-TC Telephone Storage Cabinet Instruction Manual
NOTICE TO THE INSTALLER
This manual provides an overview and the installation instructions for the
FFT-TC module.
All terminals are power limited and should be wired in accordance with the
requirements of NFPA 70 (NEC) and NFPA 72 (National Fire Alarm Code).
Failure to follow the wiring diagrams in the following pages will cause the
system to not operate as intended.
For further information, refer to the control panel installation instructions.
The module shall only be installed with listed control panels.
Refer to the control panel installation manual for proper system operation.
DESCRIPTION
The FFT-TC is a storage cabinet for fireman’s handsets and is equipped with six (6) cradles.
TECHNICAL SPECIFICATIONS
| Operating Temperature Range | 32° to 120° F (0° to 49°C) |
|---|---|
| Operating Humidity Range | 10% to 93% (non-condensing) |
INSTALLATION
Figure 1. FFT-TC CABINET
CUSTOMER SUPPORT
Potter Electric Signal Company, LLC
St. Louis, MO
Phone: 800-325-3936
Web: www.pottersignal.com
