Cyton Snap 11S DX7 Wireless Smart Camera User Manual
- June 9, 2024
- Cyton
Table of Contents
Snap 11S DX7 Wireless Smart Camera
User Manual
DX7
ORIGINALITY DESIGN SMART – AND BEAUTIFUL
Model: DX7
Snap 11S DX7 Wireless Smart Camera
Product name: Wireless Smart Camera
Company: SHENZHEN CYTON Intelligence Technology CO.,LTD
Address: F/L 601, Building K, Jingchangda, No. 2000089 Shingle industrial
zone, Zhangkengjing community, Guanghua street, Longhua District, Shenzhen,
China
What’s in the box
Please consult this checklist for all parts.
Power port DC 5 V ±5%
Power on/off Press the button for 3 seconds to turn on/off the camera
Status light
- Solid red light on: the camera is malfunctional
- Blinking red light: wait for network connection (slowly) connecting the network (quickly)
- Blinking blue light: currently connecting
- Solid blue light on: the camera is working correctly
SD card slot Cloud storage, local Micro SD card (up to 128 GB)
Reset Press and hold on for 5 seconds to reset the camera
Charging • Solid red indicator on: battery is charging
indicator • Solid blue indicator on: charging completed
Max resolution 2304 x 1296
Install
Install the camera:
You can place the camera on a shelf or other surfaces to use.
Connect
Download
Cloud Edge is available for both iOS and Android OS. Search the name ‘Cloud
Edge ‘in App Store or Google Play, or scan the QR-Code to download the App.
•Support
|
---|---
https://itunes.apple.com/app/id1294635090?mt=8|
https://play.google.com/store/apps/details?id=com.cloudedge.smarteye
Add device
Log in the Cloud Edge, select “Add Device”, and add the smart camera to the
App according to the screen tips(Make the smart camera close to the router
when configuring).
NOTE: If you need to re-select the WiFi network, please press and hold
the “RESET” button for 5 seconds, the device will restart, and the indicator
will be flashing red.
FAQ
Q: The device cannot be previewed properly?****
– A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after resetting?****
– A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Q: How to cut the camera network to another router?****
– A: First remove and reset the device on the App and then configure the device again by the App.
Q: Why doesn’t the device identify the SD card?****
– A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?****
– A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened.
Functions
Remote wake-up
The camera will be in a sleep mode to save power; you can have a preview in
App.
Full-duplex audio
You can see and hear the visitor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message to your
cell phone.
Low battery alarm
When the battery power is lower than your set, the App will send a
notification to your mobile phone.
Record
Using SD card or opening the Cloud-Storage Service, to keep recording for
every moment.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
FCC radiating norm
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Compliance Statement
These limits are designed to provide reasonable protection against frequency
interference in residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed or used in accordance
with the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in television
reception, which can be determined by turning the equipment off and on. The
user is encouraged to try and correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION!
The Federal Communications Commission warns the user that changes or
modifications to the unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of theca Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there ions guarantee that
interference will not occurring a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off Andon, the user is encouraged to try
to correct the interference by one or more of the following measures:
FCC radiating norm
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from that to which the receivers connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator&body.