STRYD PE932 Power Meter for Running User Manual
- June 9, 2024
- STRYD
Table of Contents
RUNNING WITH POWER
USER MANUAL
PE932 Power Meter for Running
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
OVERVIEW
Stryd is the first wearable device to measure running power. It gives runners a way to accurately measure training intensity across varied terrain. Stryd provides real-time feedback on exertion, form, economy, and fatigue via the sports watches and mobile devices athletes already use. Stryd unlocks ways for runners to improve running.
WHY STRYD
Better form, better efficiency
Train in the right zone
Perfect pace for the perfect race
GETTING STARTED
- Clip the device on your left or right shoe, with the device LED facing up and the smaller side of the device pointing towards your toe.
- Connect the device with your sports watch or the STRYD smart phone mobile app.
- Begin your workout.
- After you finish your workout, upload your workout data through STRYD smart phone mobile app or 3rd-party sports watch software.
SPECIFICATIONS
POWER METRICS| Running efficiency, training intensity, Run form, pace &
distance
---|---
INSTALLATION| Shoe clip
DIMENSIONS| 4.05cm x 29.95cm x 10.5cm
WEIGHT| 7g
WATER RESISTANCE| 30 mins @ 1.5 meter
BATTERY LIFETIME| One month per charge
COMMUNICATION| Bluetooth, ANT+
OPERATING TEMPERATURE| -20 ~ 60℃
CONNECT TO SPORTS WATCH
- Stryd supports power-enabled sports watches, including but not limited to, Garmin Connect IQ-compatible watches and XT series, Suunto Ambit and Spaartan series, and Polar Vantage series and V800.
- Please follow the instructions from the sports watch’s user manual to connect STRYD with your sports watch.
CONNECTING TO MOBILE PHONE
STRYD is equipped with a mobile phone application, which supports realtime
coaching & feedback to runners, as well as post-run analysis.
To connect the STRYD device with the mobile application:
- Clip the device to your shoe.
- Turn on the STRYD mobile application.
- Start your workout.
- The mobile application will automatically connect with your STRYD device.
POST-RUN ANALYSIS
- Workout upload: The STRYD mobile phone app automatically uploads your run data to the STRYD online training center. If you use your powerenabled sports watch, please use the the 3rd-party sports watch software to upload the data, or the Stryd Connect IQ app on compatible Garmin watches.
- Post-run analysis: Using the STRYD online training center or supported 3rd-party online training center, you can review your run-training data, and then adjust your training plan accordingly.
CHARGING BATTERY
Stryd uses a pre-installed rechargeable Li-ion battery, which supports roughly
a month of use per charge, depending daily run duration.
When the battery energy is low, a “low battery” icon displays on the Stryd
mobile app.
To charge the battery, place Stryd on the center point of the included wired
charging station. A light will illuminate, indicating that battery charging is
in progress.
NOTE: Stryd will not charge in temperatures lower than 0 C/32 F.
WARNING:
This is not a medical device and is not recommended for use by persons with
serious heart conditions or physical injury. Consult your physician before
beginning any exercise program.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>