FANER F-15K Remote Control Instruction Manual
- June 1, 2024
- FANER
Table of Contents
FANER F-15K Remote Control
Product Usage Instructions
- Install 2 AAA batteries into the remote control.
- Ensure the batteries are inserted with correct polarity (positive and negative).
Functionality Overview
The remote control features various keys for controlling different functions:
- Gear indicator (gear 1 – 6)
- Main on/off code key
- Forward/reverse key
- Natural wind key
- Timing keys (reduce, increase, off)
- Fan gear keys (reduce, increase)
- Switch the colour temperature key
- Safe mode key
- Sound on/off key
- Light on/off key
- Brightness adjustment keys (reduce, increase)
Operation
To operate the remote control:
- Press the desired key to control the corresponding function.
- Follow specific instructions for timing and fan/light adjustments.
- To match codes or reset the remote control, follow the provided instructions.
FAQ
- Q: How do I reset the remote control?
- A: Press and hold two buttons simultaneously until you hear a sound. This will reset the code matching.
- Q: What should I do if the remote control is lost?
- A: Use a new remote control to perform new code matching. The old remote control will then be disabled.
Specifications
- Applicant : Zhongshan Faner Lighting Technology Co., Ltd
- Model No: F-15K
- Battery: 3V (2*1.5V AAA)
F-15K (with light) remote control manual
Remote control function introduction
gear indicator (gear 1 – 6)
- Code matching:
- Within 5 seconds after putting the battery in, keep pressing the “ ” two buttons at the same time until you hear a “Di” sound, then the code matching is successful.
- Note: if the remote control is lost, pls use a new remote control to do new code matching, then the old remote control is disabled.
- Main on/off（code key):
- Main switch, direct control of the light and the fan, simultaneously on/off.
- With memory function. The memory function can only be effective when the time interval between turning on and turning off is at least 8-10 seconds. After you press this button to turn on the fan, the fan gear and the light gear will automatically restore the last setting mode.
- Press this button to turn off, the timer mode and natural wind mode is cancelled.
- Forward/reverse key:
- The factory default mode is forward.
- When the fan is in forward mode, press the button, and the fan will stop rotating gradually, then within 5 seconds, it will start to rotate reversely.
- When the fan is in reverse mode, press the button, and the fan will stop rotating gradually, then within 5 seconds, it will start to rotate forward.
- When the fan is off, pressing this button will have no effect.
- Natural wind key:
- After pressing this button, the fan switches cyclically from gear 1-2-3-4-5-6 in turn, with each gear working for about 5 seconds.
- Press fan gear key (reduce) or fan gear key (increase), and the natural wind mode is cancelled.
- Timing key (reduce):
- Press once to reduce 1 hour, until the minimum timing is 1 hour.
- The gear indicator light on the top of the remote control will indicate the present timing at the same time, 1 indicator light means 1 hour.
- When the set time is reached, the fan and the light are off at the same time.
- Timing off key:
- Press once to cancel timing mode.
- With memory function. After re-entering the timer mode, the last timer will be automatically restored.
- Timing key (increase)
- Press once to increase 1 hour, until the maximum timing is 6 hours.
- The gear indicator light on the top of the remote control will indicate the present timing at the same time, 1 indicator light means 1 hour.
- When the set time is reached, the fan and the light are off at the same time.
- Fan gear key (reduce):
- Press once to reduce 1 gear, until the minimum 1 gear. The gear indicator light on the top of the remote control will indicate the present gear at the same time, 1 indicator light means 1 gear.
- Fan on/off key:
- Fan on/off control button, press once to turn the fan on and press again to turn the fan off.
- With the memory function, the last fan gear will be automatically restored when the fan is turned on every time.
- Fan gear button (increase):
- Press once to increase 1 gear, until the maximum setting is 6 gears. The gear indicator light on the top of the remote control will indicate the present gear at the same time, 1 indicator light means 1 gear.
- Switch colour temperature:
- Press this button once at a time to switch the lighting temperature between 3000k, 4000k & 5000k.
- Safe mode:
- When the fan is powered on, press this button, when you hear a “Di” sound which means the safe mode is activated. Then the light will be turned on automatically for 5 minutes in every 2 hours until the safe mode is cancelled.
- When the fan is powered on, press this button again, when you hear a “Di-Di-” sound which means the safe mode is cancelled.
- Press any button, the safe mode is cancelled too.
- Sound on/off:
- Press this button to turn off the remote control sound; press the button again to turn on the remote control sound.
- Brightness (reduce):
- Minimum brightness 20%, maximum brightness 100%.
- Press once to reduce 1 gear, until the minimum setting is 1 gear which has 20% brightness, the 6-gear indicator light on the top of the remote control will indicate the present gear, and 1 indicator light means 1 gear.
- Light on/off:
- LED light on/off button, press once to turn on the light, press again to turn off the light
- With the memory function, turn the light on again, it will restore the last brightness and lighting temperature setting automatically.
- The memory function can only be effective when the time interval between turning on and turning off the light is at least 8-10 seconds.
- Note: there is no need to press this light on/off button before setting the light brightness.
- Brightness (increase):
- Minimum brightness 20%, maximum brightness 100%.
- Press once to increase 1 gear, until the maximum setting is 6 gears which has 100% brightness, the 6-gear indicator light on the top of the remote control will indicate the present gear, 1 indicator light means 1 gear.
Attention
- This is a wireless remote control, only need to install a battery before using it, no need to connect any other power.
- Before using this remote control, pls check if the battery is installed properly, especially pay attention to the positive and negative anodes of the battery. The gear indicator on the top of the remote control blinks when you press the button every time.
FCC STATEMENT
Warning
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>