Heater SPORTS SL129CM110V Slider 360 Lite Cricket Bowling Machine Owner’s Manual
- June 9, 2024
- Heater SPORTS
Table of Contents
Heater SPORTS SL129CM110V Slider 360 Lite Cricket Bowling Machine
Model
- Model No: SL129CM110V
- Serial No.
Write the serial number in the space above for reference.
ACTIVATE YOUR WARRANTY
- To register your product and activate your warranty, call: 1-800-492-9334
CUSTOMER CARE
- For customer service inquiries, please call our toll free line at 1-800-492-9334.
CAUTION: Read all precautions and instructions in this manual before using this product. Keep this manual for future reference.
DO NOT RETURN TO STORE, CALL: 1-800-492-9334
Read Before Operating!
IMPORTANT
- DO NOT RETURN THE SLIDER MACHINE TO THE RETAIL STORE WHERE PURCHASED.
- CALL TOLL-FREE: 800-492-9334.
_ WARNING: _ONLY USE HEATER LITE-BALLS IN THIS MACHINE
The Slider Lite-Ball BOWLING Machine only uses Slider Lite-Balls. IF YOU PUT REAL BALLS THE SLIDER LITE-BALL MACHINE YOU WILL DAMAGE THE MACHINE AND VOID THE SLIDER WARRANTY. Heater Sports recommends only using official Slider Lite- Balls in your Slider Lite-Ball BOWLING Machine. These balls are incredibly accurate, long lasting, and produce the best performance in the machine. THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE MACHINE IS TURNED OFF BEFORE ASSEMBLY! KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL ENTRY AND EXIT! SERIOUS HAND, EYE, AND BODILY INJURY MAY OCCUR IF USED INCORRECTLY!
- Please be sure to read all of the instructions before using the Slider Lite-Ball BOWLING Machine to insure the machine is working properly.
- The Slider is not a toy and an adult should supervise children. It is very important the batter makes sure the area is clear before swinging a bat.
- Stay clear of the ball opening while the Slider is operating. Although the balls are very light, they may cause eye damage or another injury may occur.
- Children must be advised of this danger and appropriate precautions should be taken.
- DO NOT use any type of ball other than Slider Lite-Balls in this machine.
- Always use a NOCSE-approved batting helmet when batting.
- DO NOT LOOK INTO THE FRONT OF THE MACHINE WHILE THE SLIDER IS RUNNING.
PARTS
- Replacement Parts Available by Calling Heater Sports
TRIPOD ASSEMBLY
Insert Top Legs (3x D) in to bottom of Tripod (B), making sure the push pins lock in place. Next, insert Bottom Leg (3x E) in to the bottom of Top Legs (D), also making sure push pins lock in place. Lastly, insert Top Poles (2x C) into the top of Tripod (B), securing it tightly with Top Pole Hardware (F).
For added stability on soft surfaces, position the Ground stakes (2x G) on the back legs to lock in place.
_ IMPORTANT: _Make Sure the Machine is Mounted so the Ball Exits Over the Front Leg When BOWLING!
HOUSING ASSEMBLY
- Position Tripod so front of Tripod is facing you. Next, insert the Long Bolt attached to machine through the right side of the Tripod and out the other side.
- Slide the Machine Housing (A) close to the Tripod, making sure the Tripod fits inside the Pre-Assembled Housing Clamp.
- Slide Flat Washer (1st) and Lock Washer (2nd) on to the Long Bolt, then tighten the Knob on to Long Bolt until machine is placed in the desired BOWLING position.
_ NOTE: _A Rubber Washer May Be Between the Housing & Clamp. This is To Help Hold the Housing In Place For Added Support.
BALL FEEDER ASSEMBLY
- Attach Part H Feeder Port To Housing With Provided Hardware.
- Then, Slide Top Spiral Ball Feeder (J) on to Bottom Ball Feeder Spiral (I).
- Once Done, Place Ball Feeder Assembly onto Feeder Port (H).
- Plug in Spiral Ball Feeder Cord into Ball Feeder Outlet located on the side of the Housing.
WARNINGS
_ IMPORTANT: _THIS PRODUCT IS TO BE USED BY ADULTS ONLY.
- KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL EXIT! SERIOUS HAND AND BODILY INJURY MAY RESULT IF USED INCORRECTLY!
- MAKE SURE EVERY PERSON AND EVERYTHING IS CLEAR OF BOWLING MACHINE BALL PATH!
- TURN BOWLING MACHINE VARIABLE SPEED CONTROL KNOB OFF (COUNTER CLOCKWISE UNTIL IT CLICKS) TO THE “0” POSITION WHILE REFILLING THE BALL FEEDER OR RETRIEVING BALLS!
- MAKE SURE MACHINE IS BOWLING AT DESIRED TARGET BEFORE ALLOWING BATTER TO START BATTING!
- POWER CORDS OVER 20 FT. CAN CAUSE MACHINE TO LOSE ENERGY & NOT OPERATE PROPERLY!
WARNING
- Only use lite-balls. Do not use real balls.
- Make sure no lite-balls are in machine before turning on.
- Make sure you only pitch 1 lite-ball at a time.
- This machine can pitch automatically. Be safe.
- Make sure lite-ball pitch path is clear before pitching any ball.
- Do not stand in front of machine.
- Do not operate in moisture.
- This machine may cause serious bodily injury if used improperly.
- For adult operation only.
- Machines that use a wheel to throw seamed lite-balls may throw inaccurately because of the seams and cause injury. No seamed lite-ball is recommended for use when batting.
- Always use a NOCSE approved batting helmet with face guard when batting.
- Never put body parts or foreign objects in machine or look in ball exit of this machine.
OPERATION
CAUTION
USE HEATER BOWLING MACHINE BALLS FOR THE MOST ACCURATE PITCH POSSIBLE. BOWLING MACHINES THAT USE A WHEEL TO THROW BALLS WILL NOT THROW REAL BALLS AS ACCURATE BECAUSE OF THE SEAMS ON THE BALL.
IMPORTANT: THIS PRODUCT IS TO BE USED BY ADULTS ONLY. MAKE SURE MACHINE IS TURNED OFF BEFORE ASSEMBLY! KEEP HANDS AND ALL BODY PARTS AWAY FROM BALL EXIT! SERIOUS HAND AND BODILY INJURY MAY RESULT IF USED INCORRECTLY!
- Step 1: Ensure BOWLING machine variable speed control knob shows “0”.
- Step 2: Plug BOWLING machine into 3 prong power outlet (Make sure BOWLING machine wheel is not spinning.)
- Step 3: Aim BOWLING machine at desired target and make sure every person and everything is clear of BOWLING machine ball path.
- Step 4: Turn variable speed control knob on to desired speed setting.
- Step 5: Make sure ball is BOWLING in desired zone before allowing a batter to step up to hit.
- Step 6: Adjust pitch height by loosening the Pitch Height Adjustment Knob and Pitch Type Knob for your desired pitch. Re-tighten when done.
- Step 7: Once balls are done BOWLING, turn both machine & ball feeder off before collecting balls to ensure no bodily injury occurs.
ACCESSORIES
(Sold Separately)
PowerAlley 40 MPH Lite Balls
6 Lite BALLs Model# HSO14
PowerAlley 40 MPH Lite Balls are designed for ages 3-8 or players who desire a slower pitch speed. These balls are optic orange color to help young players see the ball hit their bat. Soft enough for indoor or outdoor use, these balls are great for young players for perfecting their hand-eye coordination.
PowerAlley 80 MPH Lite Balls
6 Lite BALLs Model# HSG14
PowerAlley 80 MPH Lite Balls are designed for ages 10-16 or players who desire a fast pitch speed. These balls are optic green color to help older players see the ball hit their bat. Recommended for outdoor use, these balls are great for advanced players for perfecting their hand-eye coordination.
PowerAlley 22’ Home Batting Cage
22’ x 12’ x 8’ Model# PA199
PowerAlley Home Batting Cage is 22’ x 12’ x 8’ and combines to allow you to create additional lengths of 44 feet, or longer. The PowerAlley attaches directly to the machine to provide maximum safety. Now, you can hit over 100 balls in under 15 minutes. Don’t waste time driving to find a ball park, retrieving balls, and getting frustrated. Get your PowerAlley Home Batting Cage today to become the best player you can be in the fastest time possible!
CONTACT
- 95 West 650 South
- St. George, UT 84770
- 1.800.492.9334
- 800-492-9334
- www.HeaterSports.com
- MoreInfo@HeaterSports.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>