VAXEE VXD01 Wireless Mouse User Guide
- June 9, 2024
- VAXEE
Table of Contents
- Contents of Package
- Setup
- Mouse Features
- Recommended Usage Environment
- Charging and Power LED Lights
- LED Lights during Charging
- Lift-off distance Adjustment
- Motion Sync Adjustment
- High Speed Mode Adjustment
- Displaying Mouse Status
- Function button description
- Regulatory
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
VAXEE XE Wireless
User Guide
Contents of Package
- Mouse
- Wireless Dongle (USB)
- Wireless Dongle Adapter
- Charging and Data Cable
Setup
Wired Mode
Wireless Mode
Mouse Features
- Left Button
- Right Button
- Middle Button
- Back Button
- Forward Button
- DPI Switch Button
- Report Rate Button
- Click Latency Button
- Function Button
- Power Switch
Specifications
DPI Settings 400 /800/1600 /3200dpi
Adjustable USB Report Rate:125/500 /1000 Hz
Adjustable Click Latency. .2 / 3/ 4/8 ms
Adjustable High Speed Mode:On / Off
Adjustable Motion Sync:On/ Off
Battery Life: Consistent motion at 1000Hz – Up to 90hrs in Standard Mode and
45hrs in High Speed mode
Charging Speed: From 0%100% in roughly lhr 5Ornins
Weight- 769
Sensor: RAW3395
Connector: USB
Buttons 9 buttons
Cable Length: 2 meters (6.6 feet)
Recommended Usage Environment
For optimal wireless performance, use mouse within 20cm of Wireless Dongle and further than 2m from sources of 2.4GHz interference (such as Wi-Fi routers)
Charging and Power LED Lights
LED Lights during Charging
Click the Function button to display the cur rent charge level of the mouse.
Please note the “Page Down function on the keyboard would be activated at the
same time.
Lift-off distance Adjustment
Motion Sync Adjustment
High Speed Mode Adjustment
Displaying Mouse Status
Hold the Forward button + Back button + Middle button (3+4+5)
Indicator lights on the bottom will show the current status of the mouse.
Function button description
The Function button triggers both “PageDown” and “Charging Level”. While this meansyou will activate PageDown when checking the charge level, it will not affect overall use of the mouse.
Other than providing more convenience while browsing through web pages and
documents, it also provides further convenience when you bind it to specific
items / functions in-game such as grenades /skills which you can then easily
switch to.
B Dongle Function
XE Wireless provides an A/ B dongle switch function.
If you require an additional dongle. please visit the VAXEE website to make
your purchase.
For dongle pairing and switching,
please scan the QP code below for the ‘VAXEE Dongle User Manual”.
Regulatory
FCC Approval
This device had been tested in accordance with the procedures and in
compliance with Part 15 Subpart B of Fee Rules, and keeps all requirements
according to ANSI C63.4 & FCC Pad 15 B Regulation and CISPR22 Class B
FCC 15.21: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
15.109:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
15.105: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>