bryant SYSTXBBECC01-C Series C Evolution Connex System Control Instructions
- June 4, 2024
- bryant
Table of Contents
bryant SYSTXBBECC01-C Series C Evolution Connex System Control
General
This software is ONLY compatible with these model wall controls.
- SYSTXBBECC01-C
The series C software is available by Over The Air (OTA) only.
Note: This software is for the Series C controls only. The Series A or B
controls cannot use Series C software and vice-versa.
Copyright Notice
Carrier Corporation is the copyright owner of this material. Copyright laws and international copyright treaties, as well as other intellectual property laws and treaties protect this software update package. User may not and shall not copy or otherwise reproduce or make available to any other party any part of or the entire software update package.
End User License Agreement
The user MUST read and accept the End User License Agreement included with
this software package BEFORE downloading and installing this software on the
wall control.
Revision History
Version 1.11 (June 2022)
Version 1.11 software includes the following updates to the Series C Bryant
Evolution Connex System Control:
- System monitor implemented to prevent over conditioning including a high and low temperature alert
- WPA3 security compatibility for Wi-Fi connection
- Functionality added for selection of new evaporator V Coil in the discovery screens
- New Over The Air (OTA) Status Indicator on the idle screen to indicate new firmware is being downloaded
- Temperature compensation algorithm improved for better temperature accuracy
Copyright © Carrier Corporation 2020
All trademarks are the property of their respective owners. Wi-Fi® is a
registered trademark of Wi-Fi Alliance Corporation.
- Time synchronization corrected so it synchronizes immediately when enabled
- Equipment summary updated to reflect correct outdoor unit size with NIM application.
- SAM Module compatibility added
- Wi-Fi advanced options are now available
- “All zones hold” no longer results in a quick timeout on the main screen
Version 1.05 PRODUCTION (February 2, 2022) Initial release
Installation Instructions
Finding the Current Software Version
The software installation process is Over The Air (OTA) only. The current
software version may be determined as follows:
Press menu on the Main screen,
and then the down-arrow to go to the second menu screen.
Touch service icon.
Series C Evolution Connex System Control Version 1.11 Release Notes June 21, 2022
Touch model/serial numbers on the resulting screen.
Touch wall control on the resulting screen.
View the Software Version number.
Copyright © Carrier Corporation 2020
All trademarks are the property of their respective owners.
Wi-Fi® is a registered trademark of Wi-Fi Alliance Corporation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>