LeuchtenDireckt 19091-18 ENNI LED Hanging Lamp Instruction Manual
- June 4, 2024
- LeuchtenDireckt
Table of Contents
LeuchtenDireckt 19091-18 ENNI LED Hanging Lamp Instruction Manual
Specifications
997011
3x AA, 1,5V
LED
1x LED 4,5V DC / 0,5 W
Assembly Instructions
Directions for use
We thank you very much for choosing our product. It has been produced, tested and packed with care and in accordance with the currently applicable European regulations. Please unpack the contents carefully. Check immediately upon receipt that all parts included in the scope of delivery are present and that no damage has been caused during transport. Should there be cause for complaint, please contact your specialist retailer.
Important notes:
-
Please read these instructions carefully before assembly and commissioning.
They will provide you with important information with regard to the use of the product. Please also follow the supplementary assembly instructions, if required. Keep these instructions in a safe place for your information or for ordering spare parts. -
This product is not a toy and so, it is not suitable for handling by children.
-
If the product is delivered with a plug-in power supply unit, it may only be operated with this plug-in power supply unit.
-
The supplied fittings, in the case of wall and ceiling luminaires, are designed for installation on a concrete ceiling or on plastered brickwork. If you have a different sub-surface for installation, please adapt the fittings so as to be suitable for that surface.
-
In the case that you have purchased a product that can be operated by a radio control system (e.g. by wireless remote control or an app), this product complies with the basic requirements of the Directive 2014/53/EU (Radio Equipment Directive) of the European Parliament and the Council of the European Union (of 16.04.2014 regarding radio equipment and the mutual recognition of their conformity). The complete Declaration of Conformity is available on the internet at the following address:
https://scm.paul-neuhaus.de/public/conformity/
Warning information:
- We, as the manufacturer, cannot be made liable for damage that is a result of improper installation or unintended use.
- The national and international electrical safety instructions must be followed for both the installation and operation.
- The electrical connection may only be made by carried out by an authorised specialist.
- It is essential that the product is de-energised during installation.
- Please ensure that the wires are not damaged during installation.
- Use only the prescribed and permitted lamps.
- Never touch halogen lamps with bare hands (use, for example, a lint-free and oil-free piece of cloth).
- The minimum distance to the surfaces that are illuminated must be maintained, without fail (see the sticker on the lamp).
- When carrying out maintenance and changing the lamp, it is essential that it has cooled down and is de-energised.
Explanation of symbols
- Do not touch the LED!
- Protection class 1: This luminaire is fitted with a protective conductor. This must be connected to the protective conductor terminal.
- Protection class II: This luminaire has been specially insulated and may not be connected to a protective conductor.
- Protection class III: This luminaire is intended for operation on a safety transformer (max. 42V) and is operated with safety extra low voltage.
- Minimum distance to the illuminated surfaces (in m)!
- Splash proof!
- Only suitable for use indoors!
- Use only the so-called “self shielded” lamps!
- Danger: Live parts can result in an electric shock
- Do not look into the light source.
- Replaceable (LED only) light source by a professional.
- Replaceable control gear by a professional.
- Replaceable light source by an end-user.
- Replaceable (LED only) light source by an end-user.
- Replaceable control gear by an end-user.
- The luminaire can be dimmed by an external dimmer.
- The luminaire can be dimmed by a remote control unit.
- The luminaire can be dimmed by a sensor.
- SimplyDim: If the luminaire is switched on again, within 3 seconds of being switched off, the dimming process is started. The brightness with which the luminaire is now switched off and on once again (within 3 seconds), remains the same the next time it is switched on (memory effect).
- The luminaire can be dimmed in steps by repeatedly actuating the wall switch.
- The luminaire can be dimmed via a touch dimmer.
- The luminaire can be dimmed via an app.
- The luminaire cannot be dimmed.
- CE confirmation by the manufacturer which certifies that the product complies with the applicable regulations and standards.
- A free-of-cost warranty is provided for all products whose packaging has the 5 year warranty seal affixed on it.
Identification of the terminals:
- PE or = green / yellow = protective conductor
- N = blue = neutral conductor
- L = black (brown) = phase
Connecting lines for table and standard lamps:
Type X If the connection line is damaged, it can be replaced by another
(available at specialist electrical stores).
Type Y In order to avoid a dangerous event, a damaged connection line may
only be replaced by a qualified electrician.
Type Z The connection line may not be replaced. If the line is damaged,
the unit must be scrapped.
Care instructions:
Maintain the value of the product through regular maintenance. Light soiling can be removed with a damp, soft cloth. Make sure that the detergents used do not attack the surface. Only use conventional, mild and solvent free cleaning agents. Never use scouring agents, acetone (nail polish remover) or chlorine- based cleaning agents. All of the cleaning agent must then be removed from the product without leaving any residue.
Repair:
For safety reasons, the light source of this luminaire should only be replaced by the manufacturer, a service technician commissioned by the manufacturer or a person with comparable qualifications.
If you have any complaints, please contact your authorized retailer or make use of our Service Hotline directly – in the case of technical queries, please specify the batch number (xxxxxx-xx-xx-xxxxx). You can find this on the label.
+49 2922-97 21 92 90
Kundenservice@neuhaus-group.de
Disposal instructions
Old units must not be disposed of in household waste!
If the product can no longer be used, every consumer is legally obliged to dispose of used appliances separately from the household waste, e.g. at a collection point in his/her municipality or district. This ensures that old units are disposed of properly.
If your product is battery powered or comes with a remote control, you as a consumer are legally obliged to dispose of or return used batteries properly.
-
Batteries that are not rechargeable may not be charged!
-
Do not use non-similar types of batteries or new batteries along with old ones!
-
Use only the recommended types of batteries or those of an equivalent type!
-
Check the right polarity when inserting the batteries. Remove the batteries if the product is not to be used for a long time!
-
Do not short circuit the battery contacts!
This can result in excessive heating or fire! -
Do not throw batteries into fire!
Warranty declaration
LeuchtenDirekt GmbH grants all users and businesses that have procured a luminaire directly from LeuchtenDirekt GmbH and also to all users who have procured such a luminaire from a dealer, who, in turn, has procured the luminaire directly from LeuchtenDirekt GmbH (authorized dealer)
- if not otherwise stated, the legal warranty for a period of 2 years
- for all luminaires that have the 5 year warranty seal affixed on the packaging, a free-of-cost manufacturer’s warranty for a period of 5 years covering the luminaire as well as the lamp, however, only if the lamp cannot be replaced and is permanently fixed to the luminaire, – the following luminaires –
Substance of the warranty
Warranty protection
LeuchtenDirekt GmbH warranties the user and/or business that its luminaires possess the properties that have been assured in the performance and item descriptions and that the luminaires are free of design faults, material and manufacturing defects. The state of the art and the scientific findings at the time of the manufacture of the product shall be decisive.
The warranty extends to the faultless functioning of the luminaires, the built-in electronic components and the use of faultless materials, in particular their surfaces made of glass, metal and/or plastic.
The guarantee of the lighting function is limited by the fact that the light output of the LED lamp decreases with its service life (wear and tear due to use).
The service life of an LED light source is defined as the period of time in which it is in continuous operation and during which the luminosity drops to 70% of the output value which it had at commissioning.
LeuchtenDirekt warranties that the LED lamps shall have, at least, the value of L70/ B10. L70 means that 70% of the initial luminosity is assured after the expiry of the service life of the LEDs. – B10 means that only 10% of the LEDs will undershoot this value after the end of the service life of the LEDs.
Terms of the warranty
The warranty is valid under the following conditions:
- The proper use of the LeuchtenDirekt luminaire in accordance with its instructions for operation and use;
- Maintenance and care of the luminaire in accordance with the instructions for use;
- The mounting and installation in accordance with the instructions for operation and use and the installation instructions;
- Complying with the limit values for the supply voltage and the environmental effects in accordance with the instructions for operation and use as well as the installation instructions;
- Avoidance chemical and physical adverse effects;
- The omission of unauthorized additions and conversions carried out on your own.
What is excluded from the warranty are all items that have been procured from LeuchtenDirekt-lamps, which are secondchoice articles or samples.
A settled warranty claim does not lead to a new warranty of five years. The remaining warranty period from the original warranty period shall also apply to the replacement product.
Warranty services
In the event of a defect or deficiency in the luminaire, the warranty shall cover, at the discretion of LeuchtenDirekt GmbH, a free of charge repair or a free of charge replacement delivery or a replacement delivery of a similar or corresponding LeuchtenDirekt product. LeuchtenDirekt GmbH reserves the right to adapt the warranty service to technical progress.
Costs for assembly, disassembly and transport, as well as expenses, postage and the like are excluded from the warranty. Also consequential damages, loss of business and loss of profit, which are attributable to a defective or defective LeuchtenDirekt product, are not covered by the assured warranty.
Warranty exclusion and warranty certificate
Warranty claims are only valid if, within the warranty period, but no later than the end of the working day following the end of the warranty period, the defective product is presented accompanied by a receipt or a dated invoice from LeuchtenDirekt GmbH or the authorized dealer.
The corresponding purchase receipts must therefore be kept until the end of the warranty period.
Commencement of warranty
For each luminaire, whose packaging carries the 5-year warranty seal, the warranty period is 5 years. It begins on the date of purchase, which is stated on the proof of purchase and ends 5 years after that date. An extension of the warranty is excluded. In particular, it shall not be extended by a warranty claim. Also, no new warranty begins through the provision of a replacement product. The warranty periods that are applicable to the authorized agent shall not be added on to that of the end user.
Other claims
The warranty by LeuchtenDirekt GmbH does not restrict the statutory rights of consumers, in particular, the rights arising from § 437 of the BGB (German Civil Code) (supplementary performance, withdrawal or reduction, compensation due to damage) in the event of a defect in the luminaire, these statutory rights exist independently of the warranty for the luminaire. Liability under the Product Liability Act is also not limited by the guarantee.
Enforcement of the warranty
In order to enforce the warranty, the warranty case must be reported immediately and the product must be returned along with a copy of the proof of purchase in accordance with Section 4 of this declaration. The notification must be made in writing to:
LeuchtenDirekt GmbH
Olakenweg 36
59457 Werl
The defective or faulty product must also be sent to the address given above after receipt of the return form.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>