Bietrun WXM31-2 UHF Wireless Microphone User Manual
- June 9, 2024
- BIETRUN
Table of Contents
Bietrun WXM31-2 UHF Wireless Microphone
WXM31 WXM31-2
UHF Wireless Microphone User Manual
If you have any questions, please feel free to contact us. E-mail:
amazon@bietrun.com
Product Introduction
This wireless microphone adopts UHF frequency band transmission, which has the characteristics of long transmission distance, strong anti-interference ability, low delay and crystal clear sound quality. Easy to use, operate and debug. The whole machine has extremely low power consumption and long battery life, and can be widely used in teaching, conferences, stage performances and other occasions.
Product Features
- UHF frequency band wireless transmission, get rid of the trouble of cable entanglement, good anti-interference performance,crystal clear sound quality.
- One-key startup, shutdown, and volume control, simple operation;
- LED screen display, clear at a glance;
- A variety of microphones meet different use occasions;
Product Description
Microphone
Receiver
How to Connect and Use
- .Insert the receiver plug into the MIC hole of the PA device.
- The signal plug of the receiver is a large 6.3mm plug, and the”MIC”input hole of some PA equipment is a small 3.5mm hole,which can be used with the attached converte
Note: Due to the design of the PA equipment, the “Line in” or “AUX” port of most PA equipment cannot be adapted to this receiver.
How to Lock ID
When using multiple sets, you need to lock the ID for each microphone in order to prevent interference.
- Turn on one receiver;
- Press and hold CH button and power button at the same time to turn on one microphone till the display screen shows—-
At this time, the connection indicator in the receiver turns green, which means the ID is locked successfully.
Trouble Shooting
Product Parameter
Package List
- 2X Microphone (For WXM31-2)
- 1X Microphone (For WXM31)
- 1X Receiver 1X 3.5mm Adapter
- 1X Charging Cable
- 1x User Manual
Manufacturer
SHENZHEN LONGXIANG INTELLIGENT TECHNOLOGY CO, LTD. Address: FLOOR 4, BUILDING
D, FUXINLIN INDUSTRIAL AREA, HANGCHENG INDUSTRIAL ZONE FUHUA COMMUNITY XIXIANG
STREET, BAOAN DISTRICT SHENZHEN GUANGDONG CHINA
Frequency
MIC A: CH1: 560. 5MHz CH2: 561. 5MHz CH3: 562. 5MHz CH4: 563. 5MHz CH5: 564.
5MHz CH6: 565. 5MHz CH7: 566. 5MHz, CH8: 567. 5MHz CH9: 568. 5MHz CH10: 569.
5MHz, CH11: 570. 5MHz CH12: 571. 5MHz CH13: 572. 5MHz, CH14: 573. 5MHz CH15:
574. 5MHz
MIC B: CH1: 580. 5Hz CH2: 581. 5MHz CH3: 582. 5MHz CH4: 583. 5MHz CH5: 584.
5MHz » CH6: 585. 5MHz CH7: 586. 5MHz CH8: 587. 5Hz CH9: 588. 5MHz CH10: 589.
5MHz CH11: 590. 5MHz CH12: 591.5MHz CH13: 592. 5Hz CH14: 593. 5MHz CH15: 594.
5MHz
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user S authority t operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio Communications. However, there is no guarantee that interference Will particular installation. Tf this equipment does cause harmful interference to radio or television receptl10n, which can be determined by turning the equipment off and on, the user 1s encouraged to try to not occur in a correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an out let on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undes ired operatlon. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>