Kensun EHRComp-A58A AC-DC Digital Tire Inflator for Car User Manual
- June 9, 2024
- Kensun
Table of Contents
Kensun EHRComp-A58A AC-DC Digital Tire Inflator for Car
Dear friend, We proudly present you with our latest inflator for home or
vehicle use. After much research and experience, we finally have developed a
product to be pleased with. This inflator was created with you in mind and we
hope you will be completely satisfied with the quality, design, and
performance. If you are happy, please tell your friends. If you had any issues
with the product or our service, please tell us. You can reach us at
customerservice@kensun.com or toll-free at 1-855
-Kensun-care (1-855-536-7862) As an
innovative company, we always want to hear your complaints, comments, and
ideas. We do our best to bring you a quality product along with unrivaled
customer service. You are guaranteed to be fully satisfied after being treated
by our professional and friendly support team.
Your product review is crucial to the success of our business. We will be very
grateful if you will do us a favor and take the time to write us a product
review on Amazon. To do so, you can go to
http://amzn.to/2hRiBhQ or find the order in “your orders” and click “write a product review”. You can then select the number of stars and write a few words about your experience. It means a lot to us and lets other shoppers know about this great product. Enioy! Your friends at Kensun
Full Two-Year Home Use Warranty
Kensun warrants this product for two years against any defects in material or
workmanship. The defective product will be replaced or repaired at no charge.
This warranty does not apply to accessories. This warranty gives you specific
legal rights and you may have other rights which vary from state to state.
This product is not intended for commercial use. If this product is resold or
sold by a non-authorized Kensun dealer then the warranty is void. Should you
have any questions, please contact us.
- Voltage 12V-l lOV
- Max Current <lOA
- Inflation time at AC 4.5mins
- Inflation time at DC 5mins
- Max Pressure 90PSI
- Cable Length 3300±100mm
- Hose Length 600±50mm
- Operation Temperature -10~60°C
- Dimensions 3001751 lOmm
- Net Weight 2.3kg
- Continuous Working time No more than 30min
- Accuracy of gauge ±1 psi
FUNCTIONAL DESCRIPTION
INTRODUCTION
Your inflator is designed to be used in and around the home using its 110-volt cord or in most vehicles with a standard 12-volt socket using its 12-volt adaptor cord. As with any battery-operated appliance, when the inflator is used in 12-volt mode, performance will vary directly with the battery’s state of charge. Naturally, the higher the current drawn by the inflator, the more the battery power will be decreased.
OPERATING INSTRUCTIONS
WARNING: Risk of Bursting. Too much air pressure causes a hazardous risk of bursting. Check the manufacturer’s maximum pressure rating for objects being inflated.
TO INFLATE TIRES
-
Screw the connector on the air valve stem
-
Plug the power cord into the power accessory outlet
-
Set target pressure value
- Activate the automatic shut-off feature (see instructions below)
- Press the ON/OFF switch
- The inflator will stop at the pre-set value
- Press the ON/OFF switch again
To use the automatic shut off
Before presetting the gauge, set the AC/DC switch to AC for the AC home plug or to DC for the DC car plug.
- Hold the + or – button for approximately 5 seconds until the display flashes. Set the required pressure using the + or – buttons, then wait for 2-3 seconds. The display will show the pressure value to which the tire will be inflated.
- Push the ON/OFF button for the inflator to start. When the pressure gauge reaches the pre-set value, the inflator will automatically switch off and the display will show “OFF”.
ACCESSORY USAGE
- Screw the air hose connector on the desired nozzle accessory (tapered nozzle or needle inflator)tightly so that the air won’t leak.
- Firmly insert the attached nozzle accessory into the inflation port of the object to be inflated.
NOTE: The extension and standard tapered nozzles and the needle inflator nozzle are provided with your inflator.
SWITCH
The AC/DC switch is located at the rear of the inflator just below the storage compartment in the cavity which acts as a carrying handle.
HOSE AND CORD STORAGE
The hose and cords are stored in the storage compartment on the bottom of the inflator. The compartment is designed for storing the hose and cord safely inside when the inflator is not used.
110 V AC Mode
- Always fully extend the 11 OV AC cord before each use.
- To turn the inflator on, plug in the 110-volt cord and press the top part of the switch marked “AC”.
- To turn the inflator off, partially depress the bottom part of the switch marked “DC” to the “O” position.
12V DC Mode
- Do not operate the inflator when the car engine is running, just put the car in accessory mode.
- Always fully extend the 12V DC cord before each use.
- To turn the inflator on, plug the 12-volt adaptor into your vehicle’s 12-volt accessory socket and press the bottom part of the switch marked “DC”.
- To turn the inflator off, partially depress the top part of the switch marked “AC” to the “O” position.
MAINTENANCE
Use mild soap and a damp cloth to clean the tool. To assure product SAFETY and RELIABILITY, repairs, maintenance, and adjustment should be performed by authorized service centers, always using identical replacement parts.
GENERAL SAFETY RULES
Read all instructions before operating the product. Failure to follow all
instructions listed below may result in electric shock, fire, and/or serious
injury.
SAVE THESE INSTRUCTIONS
-
KEEP CHILDREN AWAY
Do not let children play with the tool or extension cord. They should be kept away from the work area. -
STORE IDLE TOOLS
When not in use, tools should be stored in dry, and high or locked-up places – out of reach of children. -
DON’T FORCE TOOL
It will do the job better and safer at the rate for which it was intended. -
USE THE RIGHT TOOL
Don’t force a small tool or attachment to do the job of a heavy-duty tool. Don’t use tools for purposes not intended. -
DISCONNECT OR LOCK OFF TOOLS
when not in use, before servicing, and when changing accessories. -
REMOVE ADJUSTING KEYS AND WRENCHES
Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.
-
AVOID UNINTENTIONAL STARTING
Don’t carry the tool with your finger on the switch. Be sure the switch is off when plugging in. -
EXTENSION CORDS
Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. -
OUTDOOR USE EXTENSION CORDS
When tool is used outdoors, use only extension cords intended for use outdoors and so marked. -
STAY ALERT
Watch what you are doing. Use common sense. Do not operate tool when you are tired. -
CHECK DAMAGED PARTS
Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual. Have defective switches been replaced by the authorized service center? Do not use the tool if the switch does not turn it on and off. -
DO NOT OPERATE
portable electric tools near flammable liquids or in gaseous or explosive atmospheres. Motors in these tools normally spark, and the sparks might ignite fumes.
ADDITIONAL SAFETY WARNINGS
WARNING! RISK TO BREATHING: The compressed air from your inflator is not safe for breathing. Never inhale air from your inflator or from a breathing device connected to the inflator.
WARNING! RISK OF ELECTRIC SHOCK: Turn off and unplug the inflator when not in use, when cleaning, or when changing nozzles. Do not expose the inflator to rain or wet conditions. Water entering the inflator will increase the risk of electric shock.
WARNING! RISK OF FALLING: Since the vibration produced by the inflator may cause it to “walk”, do not operate on a high shelf or another surface. Operate at ground or bench level.
WARNING! RISK OF UNSAFE OPERATION: Do not modify or attempt to repair.
Never drill into, weld, or make any modifications to the inflator or its
attachments.
Do not operate the inflator when the car engine is running. Operate only with
the accessories included or those rated for 160 p.s.i. or higher. The use of
any accessory not recommended for use with this tool could be hazardous.
- Never “horseplay”. High-pressure air is dangerous. Don’t direct airflow at yourself or others.
WARNING! RISK OF FIRE:
- the inflator can become hot during use. Allow the inflator to cool 30 minutes before storing away.
- Never carry the inflator by the hose.
WARNING! This product or its power cord contains lead,a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
California Proposition 65
PLEASE NOTE: If the compressor has been working nonstop for more than 20
minutes, please give it an l0-minute break to cool off before using it
further.
If you need to fill up a tire from O PSI, you can use a jack to lift the car
which will make it easier to inflate the tire, or alternatively take 5-
10-minute breaks if the compressor shuts off, especially in hot weather.
WARNING! The use of any accessory not recommended for use with this
compressor could be hazardous.
Service Information
The Kensun Customer Service Center is staffed with friendly and trained
personnel to provide customers with efficient and reliable service and
support. Whether you need technical advice, repair, or genuine factory
replacement parts contact Kensun at
1-855-536-7862
customerservice@kensun.com
Please have your order number available when calling for support. In most
cases, a Kensun representative can resolve the problem over the phone. If you
have a suggestion or comment, give us a call. Your feedback is vital to
Kensun. Thank you for choosing Kensun!
FAQs
Will this work with a car that has a 12 volt battery?****
Yes, it will work with any car that has a 12 volt battery.
Will this work on a vehicle with only one tire?****
Yes, it will work on a vehicle with one tire.
Will this work on a car that has an automatic tire pressure monitoring system?****
Yes, it will work on any car that has an automatic tire pressure monitoring system.
Will this work on a motorcycle?****
No, it will not fit on a motorcycle.
How long does the air last in the tire after the inflator is turned off?****
It will keep the air in the tire for about 3 minutes.
Can you use this to inflate other items besides tires?****
No, this is designed for use with tires only.
How long does it take to inflate a tire from 0 to 35 PSI?****
It takes about 5 minutes to inflate a tire from 0 to 35 PSI.
What is the maximum PSI that can be reached by this inflator?****
The maximum PSI that can be reached by this inflator is 50 PSI.
Is there an indicator light to show when the inflator is turned on?****
Yes, there is an indicator light to show when the inflator is turned on.
Does this inflator come with any adapters or accessories?****
This inflator comes with two adapters and one extension hose.
When should you use a tire inflator?****
When you get a flat, using a tyre inflate is the most obvious use. A tyre inflator will frequently keep you moving if the tyre can still hold air until you can get a repair or new tyre. In addition, a pressure warning light will turn on in many autos.
How long does tire inflator last?****
Tire inflator motors have a tendency to heat up rather quickly, and they can’t operate for very long if the cooling isn’t sufficient. Although each inflator may vary, some of the most typical run times are only for 5–10 minutes.
Can I run my car while using tire inflator?****
DON’T drive the car while the inflator is running. The engine must be shut off.
How often should tire inflator be checked?****
Every two to four weeks, and always before embarking on longer excursions or if you’re carrying heavier loads, check the pressure in your tyres. chilly tyres If you check the pressure when the tyres are cold, before the temperature rises and the tyres are exposed to direct sunshine, you’ll receive a more precise reading.
How many amps does a tire inflator use?****
The majority of 12-volt inflators only use up to 15 amps of current, which poses no issue for the majority of modern cars but may be excessive for vehicles with lower-amperage power outlets.
Video
Download PDF Link;Kensun AC-DC Digital Tire Inflator pdf
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>