HP tuners Software User Guide
- June 9, 2024
- HP tuners
Table of Contents
20210222v1.1 PUBLIC DOCUMENT
Using Switch on the Fly (Cruise Control Method)
Meet switching requirements
- Vehicle must be equipped with OEM cruise control hardware and steering wheel.
- Vehicle must be On or Running, and Cruise Control must be deactivated.
Activate the Switching Menu
Once activated, switching slots is available for 10 seconds.
Now that we are activated
Deactivate the Switching Menu
The switching menu will automatically deactivate after 10 seconds if no buttons are pressed
* Tachometer display during engine operation is disallowed for driver safety.
FAQs
Can I use this feature with an aftermarket steering wheel?
– Yes! This feature is available when using the HPT Diesel Switch.
I forgot what slot I’m currently in, how can I tell which slot is active?
– Use VCM Scanner to monitor the “Active Slot” parameter or press the “Coast” button.
I made a bunch of calibration changes, but nothing seems to change when I switch slots?
– Make sure that each set of SOTF tables has the SOTF Enable set to “OEM+SOTF”.
I set my Default Slot to 4 but when I start the car it is Slot 0, what’s going on?
– If the Default Slot is greater than the Max Allowed Slots it will default to Slot 0.
I shut off the car in Slot 3, and when I started it back up the Active Slot was 3! How did that happen?
– We thought it’d be cool if this feature remembered your previous slot and restored it for you on startup.
I’ve tried everything, I just can’t get this to work! Can you tell me what I’m doing wrong?
– Yes! Contact us at https://support.hptuners.com to proceed with diagnosing the cause.
Will this work in my (insert currently unsupported application here)?
– We will be adding more applications based on demand and availability!
HP Tuners, LLC.
700 Eastwood Lane
Buffalo Grove, IL 60089, USA
Switch on the Fly
User Guide v1
HPTUNERS.COM