ANYSUN CD110-7D1-DVR-DC Sewer Inspection Camera with Distance Counter User Manual

ANYSUN CD110-7D1-DVR-DC Sewer Inspection Camera with Distance Counter

User Introduction

7D1 Inspection camera is a professional grade sewer inspection push camera. Firstly, our sewer drains and pipe cameras give operators a full, clear picture
of the problem with industry leading camera probes. Our complete system includes a large 7” LCD screen with distance counter. Secondly, our system includes a DVR that requires one touch to record. The 7D1 applications are virtually limitless and includes: drains and pipes problems location and identification, such as blockages, leakages or tree roots; inspection and cleaning pipes in swimming pools; before and after pipe relining; preventative maintenance of pipes, drains and sewer mainlines and many more.

If you have any questions or concerns, please contact us at: support@anysuntech.com

General Safety Rule

Read all safety warnings and instructions. Failure to follow warnings and instructions may result in electric shock, fire and/or serious injury. Save this manual for future reference.

1. Do not operate this device in the presence of flammable liquids, gases, hazardous chemicals, superheated liquid or heavy dust. It may create sparks which may ignite the dust or fumes.
2. The camera head and the pushrod cable are waterproof; however, the DVR and connecter cable are not. Do not expose them to water or rain. This increases the risk of electrical shock.
3. Avoid using the device in environments of extreme cold, heat or humidity as it may damage the device.
4. Do not drop or press hard on the device.
5. Always backup your data before connecting your SD memory card to this system. The manufacturer is not responsible for any data of damage on your SD memory card for any reason.
6. Do not disconnect the unit while recording or playing back. It may damage the unit and/or the SD memory card.
7. Only qualified person are allowed to repair this device. Service or maintenance performed by unqualified person could result in injury.
8. Do not use this device in places where there is high voltage equipment. The device doesn’t contain high voltage protection and isolation.
9. Check or maintain this device regularly, repair it or replace new parts if there is any damage.

Product List

Product Specifications

| ITEM| PARAMETER
---|---|---
General| Temperature Operating| -10°~50°
Operating Humidity| -20°~70°
Storage Temperature| PARAMETER
Power Adapter| Input: 110V AC~240V AC Output: 12.6V 4500mA
Camera| Sensor| 1/3” Sony CCD
TV-Line| 1000 TV-Line
View Angle| 92°
Self-Leveling| Built-in
Camera Size| 23mm Ø(0.9inch)
Camera Length| 128mm
Front Lens| Sapphire
Shell Material| 304#Stainless Steel
Lighting| Built-in 12xLEDs(White)
Waterproof Rating| IP68
Power Supply| DC 12V
Current Consume| 60mA (LED OFF) 140mA (LED ON)
DVR| Screen| 7-inch
Resolution| 800×480 RGB
Mirror and Flip| Support Image mirror, flip
Video Format| AVI
Picture Format| JPEG
LED Driver| Built-in Dimmer
Play Back| Video, Photo, and Audio
Language| English and so on
Power Supply| DC 12V Input
Battery Capacity| 12.6V 4500mAh Li-ion Battery
Life Time| 6-9 Hours
Charge Time| 8 Hours
Cable Wheel| Cable Diameter| 0.19inch
Cable Length| 20m/30m/50m(Optional)
Meter Counter| Built-in

Know Your Tool

1. Product connection diagram

2. IP68 Waterproof Camera
   The camera diameter measures 23mm Ø and has LED lights built-in and a guide spring to allow flexibly when pushing along the attended direction.

3. Cable

4. 7 inch color monitor
   Item| Key| Description
   ---|---|---
   (1)| /| Power Indicator
   (2)| AV| SOFT, SHARP, LIGHT, STANDARD
   (3)| MIRROR| 90 degree, 180 degree, 270 degree, 360 degree
   (4)| /| Aspect Ratio 16:9, 4:3
   (5)| MENU| BRIGHT,CONTRAST,COLOR,TINT,MODE,TCON,

LANGUAGE,RULER LINR, Adjust these functions

(6)| V-| Down
(7)| V+| UP
(8)| POWER| Turn ON/OFF Monitor
5. Control Box(Include 8GB SD Card)
Item| Name| Description
---|---|---
| CHARGE| Set to charge when charging your unit.
1| OFF| Power off
ON/BATT| Power on
ON/AUX| When we don’t use lithium batteries and place the charging head on the side of the control box for power-on use, please adjust to this position
VIDEO OUT| Use AV cable to transmit video (AV cable Don’t included)
2| LED BRIGHT| Adjust camera probe lights
CAMERA| Connect the cable port
3| BATTERY

INDICATOR

| Battery indicator (25%,50%,75%,100%)
4| SD| Press the switch (    ) between start record or save mode
MENU| Enter settings control
MODE| Press the switch between record or playback mode
ZOOM-| Zoom out of image
ZOOM+| Zoom into image
ON/OFF| Turn DVR ON / OFF
6. 12V 4500 lithium battery
After fully charged for about 8 hours, and it can be used continuously for 6-9 hours.

7. Remote Control (Please take off the insulating sheet before use.)
   1| Mute| Sound switch
   ---|---|---
   2| Power| Screen on/off button
   3| AV        /|
   4| Adjustment key –| Reduce
   5| Adjustment key +| Add
   6| Menu| BRIGHT,CONTRAST,COLOR,TINT,MODE, TCON,LANGUAGE,RULER LINR, Adjust these functions
   7| Mode Switch| 90 degree, 180 degree, 270 degree, 360
   | | degree image rotation
   8| Time| Screen sleep time setting, 0-240 selection
   9| P.P mode| SOFT, SHARP, LIGHT, STANDARD, Four display modes are optional

8. Connect Line
   It is a wire used to connect the control box and the cable.

9. Universal centering skid
   It is installed on the camera to fix and protect the camera.

10. Charging head (Input: 100-240v 50/60 HZ Output :12.6V=1A)

11. Red Camera Protective Cover
    Two protective cover are provided to install on the camera to protect the camera.

How to use

1. How to use the counter function.
2. How to use the DVR function
   Press the “ON/OFF” button to turn on the DVR function, hold the “ON/OF” button down for more than 5 seconds to shut off the DVR function.
   Step 1: Press the MENU button to enter the setup menu, and then press the MENU key to “confirm”. Other keys such as UP/DOWN/LEFT/RIGHT keep their original functions .Please select “exit” to exit DVR and press the “MENU” key to confirm exit.
   Step 2: Some functions of the DVR can be set through a step by step selection of the menu’s various contents.

1.Manual Capture >>>>>>>| 2.Master CH >>>>>>> EXIT| 3.Photo 1 Photo 3 Movie Movie Clip EXIT
---|---|---
1.Auto Capture >>>>>>>| 2.Auto Capture >>>>>>> EXIT| 3.ON
OFF EXIT
| 2.Master CH >>>>>>>| 3.Photo 1
| | Photo 3 Movie 5s Movie 10s EXIT
| 2.Prerecord >>>>>>>| 3.Movie 5s Movie 10s OFF EXIT
1.Motion Detection >>>>>>>| 2.Range >>>>>>>| 3.1/2
1/4
1/16
EXIT
| 2.Timeslot >>>>>>>| 3.1s
3s
5s EXIT
| 2.Sensitivity >>>>>>>| 3.Low|
Middle High EXIT
1.Advanced Setting>>>>>>>| 2.Photo Quality >>>>>>>| 3.High Standard
Low EXIT
| 2.Movie Size >>>>>>>| 3.QVGA
D1 EXIT
| 2.File Overwrite >>>>>>>| 3.ON
OFF EXIT
| 2.TV Output >>>>>>>| 3.NTSC
PAL EXIT
| 2.Format Card SD >>>>>>>| 3.Yes|
No
| 2.Beep >>>>>>>| 3.ON
OFF EXIT
| 2.Set to Default >>>>>>>| 3.Yes No
| 2.Disk Info >>>>>>>|
| 2.FW Version >>>>>>>|
Set Time / Date >>>>>>>| 2.Set Time / Date >>>>>>>| 3.YY/MM/DD
00:00:001
YY/MM/DD
| 2.Photo Time Stamp >>>>>>>| 3.ON
OFF EXIT
| 2.Movie Time Stamp >>>>>>>| 3.ON
OFF EXIT

How to record and save recordings

Step 1: Turn on DVR by pressing “ON/OFF” on the control unit.

Step 2: Press “MENU” on the control unit, select manual capture > Master CH >Movie

Step 3: Press the start recording button ( ) to start recording, and then press the recording button again to automatically save the video. At the same time, a save icon will appear in the lower right corner of the screen. (See figure below for reference)

How to take and save pictures.

Step 1: Turn on power supply by pressing “ON/BATT”

Step 2: Press MENU and set to “Photo 1 or Photo 3” Step 3: Press the start photo button ( ) to start taking photos and automatically save them to the SD card. (As shown in the figure below)

How to charge your device

Charging method 1: Use the charging head to directly charge the 12V lithium battery (when fully charged, the charging head indicator turns from red to green, and it can be used for 6-9 hours).

Charging method 2:

• Step 1: Set the switch on the control box to “ON/AUX”.
• Step 2: Insert the charging head into the “DC 12V” hole.

How to rotate the screen 360 degrees

Press the “MIRROR” button on the display, the image can be 90 degree, 180 degree, 270 degree, 360 degree image rotation.

How to play videos and view pictures

How to play video

1. Turn on the power (ON/BATT, and turn on the DVR function of the control box (ON/OFF) at the same time, press the “MODE” button on the control box, select the video you want to view, and press the play icon again to play the video. How to view pictures and videos
2. Turn on the power (ON/BATT, and turn on the DVR function of the control box(ON/OFF) at the same time, press the “MODE” button on the control box, select the picture or video you want to view, and use the up, down, left, and Right click to view.

How to delete videos and pictures
Turn on the power (ON/BATT, and turn on the DVR function (ON/OFF) of the control box at the same time, press the “MODE” button on the control box to view pictures or videos, and then press the “MENU” button to delete pictures or videos.

How to zoom in and out of pictures
Turn on the power (ON/BATT, turn on the DVR function of the control box (ON/OFF) at the same time, press ZOOM-, ZOOM+ to zoom in and out of the image.

How to operate the video output function
There is a VIDEO OUT interface in the control box, which can be plugged in with an AV cable and connected to an external monitor to synchronize the monitor (Note: AV cable is not included).

Precautions for Product Use

Product maintenance and maintenance

1. Please keep the product dry after use.
2. After use, please remove the camera and cover it with a cover to prevent metal oxidation.

Blue screen’s Solve Method

Method 1：

1. Checking whether all parts are in well connected, and tighten the camera head.
2. Please gently unscrew the camera head( pic1 ) , and then use clean non-dust and dry cloth to clear the part to avoid dust, ash and dirt( pic2 ). After cleaning, pls connect other parts well and turn on the control box switch, then screw into the camera head.

Method 2： Cable for Testing (Instructions for use)
In the package you will receive a testing cable to test the camera when the screen has gone blue (the screen display” please select the input signal”).

1. Ensure the control box is in fully charged, then turn switch to ON/BATT, and turn ” LED BRIGHT” switch to Max.
2. Connect data cable into Camera from power supply as shown in Pic 1 .
3. Connect camera probe into the connection as shown in Pic 2.
   If the camera LED turns on then the camera probe is fine and need to replace cable .
   If the camera LED lights does not turn on then need to replace camera probe.

Frequently Asked Questions

function, the focal length can be changed through the ZOOM-,ZOOM+ beginning of the control box.
The light on the camera does not light up|

1. The control box has the button of “LED

BRIGHT”, you can adjust the brightness of the camera light.

How to record and save pictures and videos.| Please check (1)(2)(3) in point 4 of the manual.
Please input the signal on the screen.| Please check the appearance of the pro- duct for damage. 1: Whether the wire inside the camera spring is damaged. 2: Whether the cable is broken. Please check Method 二 》（1）(2) in point 7 of the manual.

If there is no appearance damage, please use the test line to test. Please check

Method 二 》(3) in point 7 of the manual.

My cable broke in operation. Is this covered by the warranty?| If the damage is caused by improper operation, this is not covered by the warranty. If the coil is broken, you can contact us and we will send you the method of repairing the coil.
Can the cable be bent?| The cable is made of hard material, and in operation, it cannot be bent less than 90 degrees, it is easy to break the coil.

Warranty Description

Your following unit is protected with a one-year warranty. In order to be covered by the warranty please read the following description:

1. After receiving the product, you notice any parts not working properly or any accessories not in great conditions please feel free to contact us and will resolve the issue.
2. If there’s an issue with the camera probe or having issues with the monitor, give us a call and if there was any damage due to shipping, we will replace the accessory at no additional cost.

Product Warranty Card

Name:| | Purchase date:|
---|---|---|---
Contact number:| | postal code:|
Address:|
Purchasing Date:|
Country:| | Purchase Order ID:|
If have any question, please email us at: support@anysuntech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>