ISOACOUSTICS V120 T-Adapter To Studio Monitor Installation Guide
- June 9, 2024
- ISOACOUSTICS
Table of Contents
V120 T-Adapter To Studio Monitor
Installation Guide
V120 T-Adapter To Studio Monitor
V120 Adapters mount common studio monitors to the V120 L-Bracket and C-Brackets.
Installation Video
For video instructions on how to install the V120 adapters to the V120 Brackets, please use the QR code or shortened URL listed below:
Safety Warnings
When using this product, basic safety precautions should always be followed to reduce the risk of injury, including the following:
- Read this installation guide very carefully and pay attention to the information contained within, before installing the V120 Adapters
- Installation should be carried out by trained installation personnel
- When mounting, observe and follow the local, national and international regulations and standards.
Models
Hardware
Attach Adapter to Tilt Adjuster
Instructions
-
Mount the adapter for your studio monitor to the Tilt Adjuster, using the following hardware included with the Adapter. • Black M6 bolt (Qty 2)
• Lock washers (Qty 2)
• M6 Nut (Qty 2)
-
Fasten the adapter to the threads on the back of the studio monitors using the silver bolts and lock washers included with the Adapter. Bolts might need to be purchased separately if a different size or length is required.
-
Follow the instructions included with the V120 mount and brackets to assemble the Brackets and mount them to the V120 mount.
IsoAcoustics Inc.
39 Main St. North, Unit 5, Markham, ON, Canada L3P 1X3
www.isoacoustics.com
info@isoacoustics.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>