TUFSKINZ TAC055 Tacoma Mud Flaps Instruction Manual
- June 9, 2024
- TUFSKINZ
Table of Contents
Questions or Support?
Contact: Sales@TUFSKINZ.com
Follow us on Instagram & Facebook
@TUFSKINZ
Installation and Care Instructions
Tacoma Mud Flaps(Front)
Please read all instructions before installation.
1. Tools and Materials Needed
- 5/16” Socket Wrench
- 10mm Socket Wrench(For Factory screws)
- 2 – 2inch screws(Included)
- 4 – Spacers(Included)
2. Installation Preparation
- Remove factory screws, see Figure 1 for location.
- Remove Factory Screws as shown here:
3. Installation
- Attach the Long Screw with 2 spacers(Included), as seen in Figure 2 Do not over tighten
- Attach the remaining 2 factory screws, as seen in Figure 3 Do not over tighten
- Tighten each screw so it’s snug, be careful not to over tighten – Repeat steps for other side.
- Attach Long Screw and 2 spacers as shown here:
REV: 1/07/20
Read User Manual Online (PDF format)
Loading......