humblestead PF2152 21.5 Inch Smart Wifi Digital Photo Frame User Manual

humblestead PF2152 21.5 Inch Smart Wifi Digital Photo Frame

Frame Overview

Digital Photo Frame

1. Remote Receiver

2. SD Card Slot
   SD cards can be used to import photos to the frame. Photos can also be exported to an
   SD card from the frame to make a backup or move to a computer, etc. Note that photos cannot be displayed directly from an SD card.

3. HeadphoneJack

4. USB 2.0 Port
   The USB 2.0 port is for use with flash storage devices (USB/thumb drive) for importing and exporting photos. Note that photos cannot be displayed directly from a USB drive. Additionally, the frame cannot be connected to a computer via the USB port.

5. Mini USB Port
   The Mini USB port is for use by our technicians during setup and service only. It does not support importing or exporting photos.

6. DC (Power) Port

7. Return to the previous slide

8. Advance to the next slide

Specifications

Screen| 27.5″ non-Touchscreen
Resolution| 7 9207 080 IPS HD Display
RAM| 7GB
Storage| 32GB
Wi-Fi| 2.4GHz ( WiFi6)
CPU| A733 Quad-core ARM CortexTM-A53@7.6GHz

• Storage specifications refer to capacity before formatting. Actual formatted capacity will be less.

Remote Control

1. Screen on/off
2. Navigation buttons
3. Back
4. Delete a photo
5. Screen brightness ( Adjust the screen brightness)
6. Favorite a photo
7. Home
8. Volume control ( Adjustthe volume level)

Frame Initial Setup

• Open the packaging. Follow the instructions to mount your frame in a suitable location or attach the stand and set the frame on a table.
  Plug in the power supply to turn on the picture frame. You may need to wait up to 15 seconds for the Ai MOR system to start.

• Use the remote control to set up the frame by following the prompts on the screen.

• First start by selecting a language. This will be used as the system language and in all menus.

• Connect your frame to the Internet by selecting a WiFi network and entering the password.

• Enter your name and the location where you will place the frame (e.g. “John Smith” and “Living room,” “Kitchen;’ or “Office.”) Finally, set the time zone you are in.

Download the AiMOR App on Your Phone

• To share your special moments with compatible digital photo frames from anywhere in the world, start by downloading the free app Ai MOR on your mobile device.
• Search “Ai MOR” in the App Store (iOS) or on Google Play (Android) to download Ai MOR.

Connecting to a Frame

In order to send pictures to a frame, you need to connect to the frame using the Ai MOR app. Follow the steps below to connect:

• Click the “Add friends” icon on the picture frame. A box will appear with a unique code which is valid for 12 hours.
• Now go to the Ai MOR app on your phone and click the plus icon. under the device tab, then enter the code from the frame and click. Your mobile app is now connected to the frame.
• Share the frame code with your friends or family. They can add the frame and start sharing photos to the frame. There is no limit to the number of mobile users that can connect to the frame.

Sharing Photos & Videos from AiMOR to a Frame

Once you have connected to a frame on the mobile app, you can select photos and videos to share to the frame. If sharing from your gallery, you can send up to 9 photos at a time or send one short video (up to 15 seconds). You can also take photos or video directly in the app.

The AiMDR App

Batch upload
When your phone and photo frame are connected to the same WiFi network, you can batch upload photos.

360° Rotation of the photo frame

The photo frame can be rotated 360°. You can choose to hang it vertically or horizontally. Please be careful not to tangle the power cord when rotating the photo frame.

The Ai MOR app can sense the hanging direction of the photo frame. When uploading a photo, you can directly see the horizontal and vertical screen display effects when the photo is uploaded to the photo frame in the mobile app. You can also manually adjust the display position of the photo in the app, or zoom in and out of the photo.

Quick Menu

When the frame is turned on, press the OK button to bring up the quick settings menu. You can adjust/hide the current picture, enter the gallery to view all pictures/videos, or adjust frame settings.

• Favorite
  Add the current picture/video to my favorites album.

• Hide Photo
  The current picture will no longer be displayed in the slideshow. Note: the picture will not be deleted.

• Gallery
  View all the pictures and videos stored in the picture frame.

• Fit to Frame
  The photo will be fully displayed on the frame in either orientation. Extra background space will be blurred out. This only applies to the current photo.

• Fill Frame
  The photo will be cropped to fully fill the screen in either orientation. This only applies to the current photo. (Note: you can set the default display mode for all photos in Settings – Slideshow)

• Adjust Photo
  Adjust which part of the photo is displayed while using fill frame mode.

• Add Friend
  Generate a code for your frame to share with friends.

• Quick settings
  Use this menu to quickly access the most common functions.

• Power Off
  Select this icon to have the frame shut down, restart, or sleep.

• Settings
  Enter the detailed settings menu.

Note

Icon to view the WiFi status, means that the WiFi signal is strong, means no WiFi, and icon to view the server status,
means connecting to the server, means disconnecting the server.

Notification Message

When a slideshow is playing, a new message notification pops up, press the navigation up key on the remote control and select View/Close this message.

Detailed Settings Menu

Press the OK button to bring up the quick settings menu, then select the settings icon to view detailed settings and options for the frame. In settings, you can personalize your frame to meet your needs.

Frame

• Frame Name
  Changes the name of your frame. This name will also be seen by friends and family in their list of connected frames in the Ai MOR app.

• Frame Location
  Changes the listed location of your frame. This location is displayed on your friends’ and family’s list of connected frames to help distinguish them from each other.

• Set Language
  Sets the system language used throughout your frame.

• Time Zone
  Sets the time zone that will be used on your frame for features like sleep mode. The tablet adopts 24-hour format, you can choose to turn it on or off.

Manage

• Photos Stored
  Shows total number of photos/videos on the frame and amount of available storage space.

• Show/hide Photos
  Select which photos to hide by clicking them once. Hidden photos will not be displayed in the slideshow, however, they will not be deleted and can always be unhidden for future use. Use to hide or show all photos.

• Delete Photos
  Select photos that you want to permanently delete from your frame by clicking them once. Use IIJ to select or deselect all. Then click the trash can icon 9 in the top right corner to permanently delete.

• Import Photos
  You can import photos from an SD card. Insert the SD card , then select the photos that you want to import to your frame. Use to select or deselect all. Then click the import button in the top right corner to start importing. At this time, videos cannot be imported from external storage.
  Export Photos
  You can use an SD card to export photos from the frame to external storage.

Friends

This page contains a list of all people that are allowed to send photos to your frame.

• Friend Settings
  Here you can give permission for the friend to share the frame code with others. You can also delete a friend if you no longer want to receive photos from them.

• Delete Friend
  To remove a person from your friends list, tap delete friend. They will no longer have permission to send photos to your frame. You also have the option to delete all photos from this person at the same time.

• Add Friend
  To allow a new person to send you photos, simply tap the add friend button and share the frame code with that person. They will be added automatically once they connect to the frame through the mobile app.

Display

• Brightness Level
  Adjust the brightness level of the screen.

• Time & Temperature
  By default, your local time and temperature will be displayed on the slideshow. Toggle this switch to hide this display.

• Sleep Mode
  Sleep mode allows you to reduce power consumption by automatically turning off and waking up the device at set times. The default setting turns off the screen at 11 :oo pm and wakes it up at 7:00 am. You can adjust the start/end time as desired.
  Your frame is not powered down while sleep mode is on, so it will not affect your ability to receive photos.

Slideshow

• Timer
  Define the duration each photo is displayed.

• Show Caption
  Friends can add captions to photos when they send them from the app. Check this option to display captions in the slides how. Uncheck to hide captions.

• Fill Frame
  You can choose between two modes as the default way to display photos.
  Fill frame: Photos will be cropped to fully fifill the screen in either orientation.
  Fit to frame: Photos will be fully displayed on the frame in either
  orientation. Extra background space will be blurred out.

• Photo Display Order
  You can choose to display photos ordered by date or shuffled.

• Videos
  You can adjust video volume, turn on/off autoplay, and change video playback mode.

Wi-Fi

Select a Wi-Fi network to connect to. If you are connecting to a network with a captive portal, a web browser icon should appear in top right corner of the screen. Click it to open a browser where you can enter credentials to access the network.

Notifications
Turn on/off notifications for a variety of items and adjust notification volume.

Backup
Back up frame to external storage To back up the photos on the frame to an SD card, follow the below steps:

1. Insert SD card into the SD card slot.
2. Tap the screen and go to “Settings”
3. Go to “Backup “
4. Tap “Back up the contents of this photo frame”
   When complete, you will see” Last backup time: (Date & Time)”
   Note: Any existing backup on the SD card will be overridden!

Automatic Backup
If checked, your frame will automatically make a backup within 30 hours of you receiving new photos or making changes on your frame.

Factory Reset
Removes all data from your frame. This will permanently remove all your photos/videos, friends, and settings.

Help&About

Feedback
We strive to continuously improve our product and user experience. If you have any questions, comments, or suggestions, please reach out to us by email or through the support feature in the Ai MOR app.

User Guide
Opens the quick start guide that is shown during initial setup of the frame.

Check for Updates
Check for available software updates and download/install them on your frame.

Warranty & Contact Us

Limited One-Year Warranty
We offer a one-year quality warranty on all products, valid from the date of purchase, and subject to the following terms and conditions:

• If a quality defect is discovered within the warranty period, the manufacturer is responsible for repairing or replacing the device at no charge to the customer.
• This warranty does not apply to damages caused by improper use, accident, exposure to water, or if the product was altered or repaired by anyone other than the Manufacturer’s Service Center.
• The manufacturer shall not be liable for any incidental or consequential damages arising from the use, misuse, or mounting of the photo frame.
• All information in this manual is based on the latest information available at the time of publication. We reserve the right to make changes at any time without notice.

Contact Us

Thanks for choosing our digital photo frame. If you have any questions or problems with our products, feel free to contact our customer support team at customservicare@outlook.com or call 1-888-880-0815
We typically respond within 24 hours. Your satisfaction is our priority.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>