Midea FS40-18BR Stand Fan Owner’s Manual

June 9, 2024
Midea

Midea FS40-18BR Stand Fan

Midea-FS40-18BR-Stand-Fan-product

Instruction

CAUTION
Read the Rules for Safe Operation and instructions Carefully.

WARNING

  1. lf the supply cord is damaged, it must be replaced by the manu­facturer, its service agent, or a similarly qualified person in order to avoid a hazard.

  2. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervi­sion.

  3. Correct Disposal of this product
    This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncon­trolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. The packaging material is recyclable. Dispose of the packaging in an environ­mentally friendly manner and make it available for the recycla­ble material collection service.

  4. Indoor and household use only.

  5. When the appliance is not in use and before cleaning, unplug the appliance from the outlet.

  6. To protect against the risk of electrical shock, do not disassem­ble the fan and do not immerse the unit, cord, or plug in water or other liquid.

INSTALLATION INSTRUCTIONS

Name of components
  • Considerate Hint:
    Before installation, please remove the fan leaf locknut and the mesh hood locknut from the fuselage.Midea-FS40-18BR-Stand-Fan-
fig-1

  • Chassis installation:
    lnstall the chassis by rotating the column.

Front and Rear Guard Installation
  • Align the Catch of the Front Guard with the illustrated position of the Rear Guard.
  • Press guards sequentially with both hands.
  • Self-Catch Installation. Midea-FS40-18BR-Stand-Fan-fig-5

INSTRUCTIONS FOR USE

Instructions for the key of the remote controller

Midea-FS40-18BR-Stand-Fan-fig-6

Considerate Hint:
The remote control should be used within 5 meters in front of the product, and the deviation angle should be within 30°.

Instructions for operation of body

Midea-FS40-18BR-Stand-Fan-fig-7

  • Wind speed key:
    short press the key to adjust the wind speed, and long press the key for 2 seconds to set the timer.

MAINTENANCE INSTRUCTION

The fan requires little maintenance. Do not try to fix it by your­self. Refer it to qualified service personnel if service is needed.

  1. Before cleaning and assembling, the fan must be unplugged.

  2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust. Do not disassemble the fan to remove dust.

  3. Please wipe the exterior parts with a soft cloth soaking in a mild detergent.

  4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
    Do not use any of the following as a cleaner: gasoline, thinner.

  5. Do not allow water or any other liquid into the motor housing or interior parts.

CLEANING

  1. Be sure to unplug from the electrical supply source before cleaning.
  2. Plastic parts should be cleaned with a soft cloth moistened with mild soap. Thoroughly remove the soap film with a dry cloth.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals