PDW Cloud Cap Gravel Pump Instructions
- June 9, 2024
- PDW
Table of Contents
PDW Cloud Cap Gravel Pump
OVERVIEW
Tips
- BE KIND TO YOUR BACK! It’s nice to have the tire valve in the 12 o’clock position for hand pumping.
- Get to know your new pump before you use it for the first time on a ride. Try twisting the control knob and unthreading the nozzle for Presta mode (don’t forget it’s reverse thread, so the opposite of righty tighty lefty loosey.,)
For Presta Valves
- Open Presta valve and tap the tip to make sure air can move freely.
- Turn the pump nozzle clockwise (reverse thread!) and pull it out.
- Thread pump nozzle onto the tube valve.
- Pump by hand or continue to CO2 inflation section.
Co2 Inflation
-
Make sure the control knob is closed.
-
Thread CO2 cartridge onto the pump until it punctures
-
Open control knob to release CO2
Tip : Only release a small amount of CO2 at first to make sure it is flowing properly into the tire. -
When finished inflating, twist the control knob closed and unthread the nozzle from the valve.
ridepdw.com/collections/timber-to-town
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>