Surveillance HLPR1TW License Plate Capture Camera User Manual
- June 9, 2024
- Surveillance
Table of Contents
Surveillance HLPR1TW License Plate Capture Camera
INSTRUCTION
- ITEM №: HLPR1TW
- Adjustable function
- Resistor A: If you want to change the working time of IR Led, please open the cover at the bottom of the camera(As showed in the following picture), you can adjust the IR LED working time. Anticlockwise refers to the IR LED will start working under the darker situation. clockwise refers to the IR LED will start working under the brighter situation.
- Resistor B: If you want to change the intensity of the IR light, please open the cover at the bottom of the camera(As showed in the following picture), you can adjust the IR light intensity.
When you feel EXPOSURE on the plate, please lower down IR intensity; when you feel DARK on the plate, please increase IR intensity, IR intensity please refer to picture shown。
Packing
- Camera X1: Hexagonal Wrench X1
- User Manual X1: Mounting drawing paper X1
- Screw X 3: Junction Box X1
- Plastic Conical Anchor X: 3 Power Cable Connector X1
- Junction box(including acce ssories): X1
Specification
| ITEM | HLPR1TW |
|---|---|
| IP Rating | IP66 |
| Type | Color/Monochrome |
| Signal System | NTSC/PAL |
| Pick Up Device | 1/2.9″ 2.2 Mega Pixels CMOS |
| Picture Elements | 1920(H)X1080(V) |
| Min Illumination | 0Lux（42 Pieces IR LED ON） |
| S/N Ratio | ≥52dB |
| Lens | 9-22mm Motorized Varifocal Auto iris IR Lens |
| Mph | 28 miles/h |
| 3D/2D | ON |
| SENS-UP | OFF |
| IR SMART | ON |
| White Balance | ATW |
| Back Light Compensation | OFF |
| DWDR | OFF |
| Video Out-put | HD-TVI/HD-AHD/HD-CVI/CVBS |
| Power Supply | DC12V ±10%/AC24V±10% |
| Current Consumption | DC:580mA/AC250mA (Max) |
| IR Effect Distance | 2~15m（6.56~49.18ft）(Outdoor) |
| Dimension | 231×84X110mm (9.1”×3.3”×4.3” ) |
| Weight | 1260g/2.78pounds (Including Junction Box) |
| Storage Temperature | -30～+60℃(-22～+140℉) |
| Operating Temperature | -30～+40℃(-22～+104℉) |
- Use the OSD joystick to switch the camera to:
- video signal output switches
- TVI DVR Coaxial Signal Control and Auto Focus Lens
Menu
As shown in Picture:
- A. shows the up, down, left and right direction of the menu;
- B. shows the enter/confirm button of the menu
Lens Auto Focus
shows lens focus (Near/Far) of the Auto focus lens, and (4) shows
Zoom(wide/tele) of the AUTO focus lens. When Keep pressing “Focus” or “Zoom”
buttons, the lens will keep moving, only after “Focus” or “Zoom” button
without pressing, the lens will focus automatically.
Caution for Installation
- Pl ease do not install the camera where the vibration always happens, or the camera will be damaged.
- Please keep the g lass in front of the camera clean. Do not touch it directly. You can use a soft cloth with alcohol to wipe if necessary.
- The available IR ran ge of this camera is shown in the specification. Please be sure to place the camera in the working distance when it works
- In order to prevent short circuit, please do not loosen any screws in the camera at random.
- Please do not let the camera work in the conditions which is beyond the most extreme and demanding of operating conditions and climates shown in the specification. When any abnormal ities happen, please turn off the camera and contact your local dealer or us right away.
Pay attention to the setting angle . T he picture in the right is for your reference.
Installation Guide
- Drill Holes according to the position drawing paper and plug into the rubbers
- Paste the cotton pad on the bottom of junction box, place the water proof rubber ring on the top of the junction box body.
- Use 3pcs PWA4*25 self-tapping screws to fix the junction box body.
- Use 3pcs KM4*10 machine Screws to fix the round plate on the junction box body.
- Connect all cable connectors, make the water proof rubber go through the tail of video and power cables;
- Put all cables into the junction box body;
- Use 3pcs PM4*8 machine screws to fix the camera on the round plate.
- Use allen wrench to loosen the screw on the bullet bracket as picture shown;
- Adjust the viewing angle you need, then fasten the screw.
Noting: You can rotate 3 directions freely as picture shown.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>