iLive iKBC384S Bluetooth Under the Cabinet Radio User Manual

iLive iKBC384S Bluetooth Under the Cabinet Radio

FCC WARNINGS

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ADDITIONAL WARNINGS AND PRECAUTIONS

• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT, AND FULLY INSERT.
• The mains plug is used as a disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
• WARNING: Shock hazard – Do Not Open.
• Caution and marking information is located at the rear or bottom of the apparatus.
• Objects filled with liquids, such as vases, shall not be placed on the apparatus.
• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
• CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
• WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• WARNING: Use of this unit near fluorescent lighting may cause interference regarding the use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
• CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
• WARNING: The remote control’s button cell battery contains mercury. Do not put it in the trash, instead recycle or dispose of as hazardous waste.
• This product is supplied with a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns and can lead to death.
• The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Do not mix old and new batteries.
• Completely replace all old batteries with new ones.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
• Batteries should be recycled or disposed of as per state and local guidelines.
• WARNING: This product may contain chemicals known to the State of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.

Orientation

Clock & Timer

Setting the Clock

1. With the power off, press and hold the Clk Set/Mem button. The hour on the display will begin flashing.
2. Press the Tune +/- buttons to adjust the hour.
3. Press the Clk Set button again to adjust the minutes. The minutes on the display will begin flashing.
4. Press the Tune +/- buttons to adjust the minutes.
5. Press the Clk Set button to finish setting the time, or wait for the display to stop flashing.

Setting the Timer

1. With the power off, press the Timer button. The display will flash.
2. Press the Timer buttons to adjust the timer in increments of 10 min.
3. Press the Tune +/- buttons to adjust the timer in increments of 1 min.
4. Wait for the display to stop flashing.
5. After the set time has expired, the under cabinet music system will sound an alarm.

Disabling the Timer

• To cancel the alarm after it has sounded, press the Power button.
• To cancel the timer before the alarm has sounded, press the Timer button until the display reads 000 and the timer light is no longer lit.

CD

Note: This unit is not compatible with MP3 CDs.
Loading and Playing a CD

1. Open the CD Door.
2. Place a CD into the tray, label side facing up.
3. Close the CD Door.
4. Press the Source button to switch to CD mode.
5. Press the Play/Pause button to begin playing the loaded CD.
6. Press the Skip/Tune buttons to cycle through tracks.

Programming a CD

1. Press the Stop button to stop the CD during play.
2. Press the Prog button.
3. “PROG” will begin to blink on the display.
4. Press the Tune +/- buttons to select a track.
5. Press the Program button to save the selected track to the program.
6. Repeat steps 4 and 5 to program up to 20 tracks.

Radio

Radio Reception

An FM Antenna is built into the unit. To improve FM radio reception, adjust the position of the unit.

Tuning the FM Radio

1. Press the Power button to turn the under-cabinet music system on.
2. Press the Source button to switch to FM Radio Mode.
3. Press the Tune +/- button to tune the radio manually.
4. Hold down the Tune +/- button to scan for available stations.

Pairing a Bluetooth Device for the First Time

1. Power on the unit by pressing the Power button.
2. Press and hold the Pair button. The Pairing Indicator will begin flashing quickly. When pairing, remain within 3 feet of the unit.
3. Using the native controls on your Bluetooth device, select the IKBC384 in your Bluetooth settings to pair.
4. If your device requests a password, enter the default password 0 0 0 0 .
5. Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
6. When successfully paired and connected, the Pairing Indicator will be solid.
7. After the initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device.
8. If your device should become unpaired or you find it is unable to connect, repeat the above steps or press the Pair button to start the pairing process pairing again.

Playing Audio through Bluetooth

1. After successfully pairing to a device, use the native controls on the connected Bluetooth Device to select a track.
2. To play or pause the selected track, use the native controls on the connected Bluetooth Device, or the Play/Pause button on the unit.
3. To skip forward or back on the selected track, use the native controls on the connected Bluetooth Device, or the Skip/Tune +/- buttons on the unit.
4. Audio played through the connected Bluetooth device will now be heard through the speakers.

Using the Speakerphone

1. When a call is received, a ringtone will sound through the unit.
2. Press the button to accept the call, or accept the call using the controls on the connected phone.
3. The incoming call received through the device will now be heard through the headphones.
4. To end the call, press the button or end the call using the controls on the connected device.

Using the Audio Input
Requires a 3.5mm audio cable (not included).

1. Connect a 3.5mm audio cable to the Line In Input on the side of the unit and the audio output on an audio device.
2. Press the Power button to turn the unit on.
3. Press the Source button to switch to Line In mode.
4. Use the native controls on the connected device to play your audio through the unit.

International Support

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215
Email Support: [email protected]
Email Parts: [email protected]
Copyright © 2016 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.

FAQs

How do I reset my iKBC384S?****

To reset your iKBC384S, press and hold the Power button for 10 seconds. The LED will flash blue and then red.

How do I pair my iKBC384S to my phone?****

Press the Bluetooth button on the top of the iKBC384S until the LED flashes blue. Then, open your phone’s Bluetooth settings and search for devices. Select “IKBC384S” from the list of devices and enter 0000 as the passcode. If you have trouble pairing your device, try turning off your phone’s Bluetooth and then turning it back on, or restarting your phone.

How do I turn off my iKBC384S?****

Press and hold the Power button for 10 seconds. The LED will flash red and then blue.

What is the point of a Bluetooth radio?****

You can link your stereo system or soundbar to your smartphone and the plethora of streaming services it offers wirelessly via Bluetooth, which also powers wireless headphones and portable speakers.

How does a Bluetooth CD player work?****

Just connect a Bluetooth receiver to the audio output after buying a portable CD player. This is the same “jack” or “port” where your headphones are plugged in. This way, even if you’re told it won’t work, you can couple any of these CD players with your Bluetooth-enabled car.

Can you play radio through Bluetooth?****

It’s uncomfortable to listen to music with wireless headphones because wired headphones are required. If you wish to listen to the radio, we advise getting a DAB radio as well as a Bluetooth transmitter so you may use Bluetooth headphones to do so.

What sounds better CD or Bluetooth?****

Although Bluetooth is a good wireless choice, its sound quality is typically inferior to a direct USB connection. Bluetooth provides 320 kbps of resolution, which is higher than MP3 but lower than high-quality audio or even CDs, unlike USB.

Can you stream CD quality over Bluetooth?****

When played through a Bluetooth device that supports such codecs, the aptX and aptX HD formats of Bluetooth can replicate CD-quality sound.

Can you listen to a CD without a CD player?****

Purchase a CD player with a USB adapter and connect it. You should think about a power supply. Look for a plug-in cord that your car will accept, or choose a player that has battery power.

Can you use a Bluetooth CD player in a car?****

Such portable Bluetooth CD players are still somewhat expensive. The player does not, however, need to be physically connected to your vehicle’s audio system. Choose a portable CD player that has a Bluetooth transmitter first. Some more recent models have rechargeable batteries, which prevents battery drain.

Video

Download PDF Link;iLive Bluetooth Under the Cabinet Radio pdf

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>