amazon basics B071JLRR3T Duty Storage Shelving Double User Manual
- June 9, 2024
- amazon basics
Table of Contents
amazon basics B071JLRR3T Duty Storage Shelving Double
WHAT’S IN THE BOX
Safety and Compliance
Please read and understand this entire manual before using the product.
CAUTION
- Be aware of dynamic loading! The sudden load movement may briefly create excess load causing product failure.
- Evenly distribute the weight on each shelf, and keep the heaviest loads on the bottom shelf.
- Use only on flat, level, and hard surfaces capable of supporting the shelving and any items placed on it. Remember to only use the shelf on level ground with evenly distributed weight.
- Do not store flammable liquids in the unit unless they are secured in an approved container.
- Keep bystanders out of the area during assembly.
- This product is not a toy. Do not allow children to play with, on, or near the unit.
WARNING
- Do not stand on, step on, or alter this unit for anything outside the designed function of storage.
- Use care when handling and assembling metal parts.
- The metal may have sharp edges or corners. The use of protective gloves is recommended.
- Always remember to use proper lifting techniques when moving the boxed or assembled unit.
Preparation
Before beginning the assembly of the product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble the product.
It is recommended that this product be assembled on a clean, soft surface, such as a piece of cardboard. The assembling task can be performed by one person but the availability of a second person will make the task simpler.
Troubleshooting
| Problem | Possible cause | Corrective action |
|---|---|---|
| The shelf is not level. |
-
Beam(s) or brace(s) used for the same level are not at the same height or
they are assembled upside down. -
Rivets on the beam(s) or brace(s) are not fully seated into the post slots.
-
The ground is uneven or too soft.
|
- Re-assemble beam(s) or brace(s).
- Fully seat the rivets.
- Move the shelf to a flat, level, and hard surface.
Specifications
Measurements (WxDxH)
|
US Standard
|
Metric
---|---|---
Shelving unit| 36 X 18 X 72 in.| approx. 91.4 x 45.7 x 182.8 cm
INSTALLATION
NOTICE
Do not omit this step, which could protect your floor from scratches.
NOTICE
Make sure all the rivets are fully seated in the post slots. You may want to
use a rubber mallet (not included) to help push the rivets into the post
slots. This applies to all the rivets used in this unit.
NOTICE
Each of beams A and braces B on the same level should be at the
same height.
Feedback and Help
Love it? Hate it?
Let us know with a customer review.
- US: amazon.com/review/review-your-purchases#
- UK: amazon.co.uk/review/review-your-purchases#
- US: amazon.com/gp/help/customer/contact-us.
- UK: amazon.co.uk/gp/help/customer/contact-us.
MADE IN CHINA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>