Choetech BS005 Portable Power Station User Manual

June 9, 2024
CHOETECH

Choetech BS005 Portable Power Station

Choetech-BS005-Portable-Power-Station-PRODUCT

Dear customer

Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

Thank you very much for purchasing 1200W power station. Be sure to read this manual carefully before using the product in order to use the product correctly. This manual is needed for product after-sales service. Please keep this manual together with the invoice and other purchase certificates. In order to ensure the safety of this product during transportation, this product is only charged about 30% when it is packaged. Please recharge when you get the product. The product can be charged directly by the wall socket, please do not use extension cords and able taps. When the product is charging, do not plug other products in the same pocket.

Warning

  • Please avoid using the product near hight temperature, high humidity, direct sun environment and fireplace.
  • Do not disassemble or modify this product, it will cause malfunction and fire.
  • Please discard or recycle the product according to the methods prescribed by local laws.
  • Be careful not to drop the product from a hight place and give the product a strong impact.
  • Keep or use the product in a place out of the reach of children.
  • Please use our company’s genuine accessories. The damage caused by the use of non-genuine accessories cannot be repaired free of charge.
  • Please leave a space of about 30cm away from the side suction and exhaust ports, so as not affect the heat dissipation of the product.
  • When not using this product, please turn off the power and unplug the power cord. Please avoid storing the product in a place exposed to direct sunlight with high temperature and humidity.
  • For long-term storage, please consume power from full power to no power once every 3 months, and then recharge to about 50%.
  • Please do not use this product and its accessory cables and connecting equipment when there is a defect.
  • Please do not store the product for a long time in extremely hight and low temperature places such as in the car and in the field warehouse to avoid shortening the battery life.

AC Output Parameter

Type of AC port AC output

US/JP

| ****

**** 100V~120V 50/60Hz

CH| ****

**** 220V 50Hz

UK

| ****


230V 50Hz

EU

| ****

**** 220V~240V 50Hz

KR

|

220V 60Hz

Packaging List

Choetech-BS005-Portable-Power-Station-FIG-1

Product introduction

Choetech-BS005-Portable-Power-Station-FIG-2

This product is a 960Wh large capacity 1200W high power, 1.5 hours of hight- speed charging portable energy storage power supply, suing hight safety performance of LiFePo4 battery. It can be used as a backup power supply in case of an emergency power cut, disaster, camping and vehicles, and can also provide power for various electric tools. 1200W hight power, pure sine wave AC output, can be used for house-hold appliances such as dryers, microwave ovens, refrigerators, high-power induction cookers and it can also be used for other electronic devices such as personal computers. Through the 700W ultra-fast charging, this model can be full charged within 1.5 hours, The AC input/output voltage frequency can automatic or manually switched between 50Hz/60Hz. This product also supports a maximum 500W solar charge, allow you to charge even when the power cut in outdoor situations.

Choetech-BS005-Portable-Power-Station-FIG-3

  1. Main power control
  2. Light control
  3. USB control
  4. DC control
  5. LDC display
  6. Air intake/outlet
  7. AC on/off control (50Hz/60Hz switching control)
  8. Anderson input port (for solar panel)
  9. AC input port
  10. Overload protection

Main Power Control

  • Main Control for the whole system turns on/of.
  • Operate method: long press the button for 3s to turn on/off the system.
LED light control
  • Operate method: sort press to turn on and change the light mode (SOS/Flash).

Note: you can turn off the light by long press the button (1-2s) in any mode.

USB button
  • Operate method: short press to turn on/off

USB-A x 2

|

Type-C x 1

|

Type-C x 3

---|---|---
5V/2.4A| PD-100W| PD-20W

DC button

Operate method: short press to turn on/off

Output x 2

|

Cigar Lighter x 1

---|---
12V/3A| 12V/10A

LCD display

  • Present the remaining power and using data.

Cooling system

  • When the fans are working, please don’t block the channel.
AC button (AC output, total share 1200W)

Operate method: short press to turn on/off.

Notice

  1. Please confirm the output voltage or frequency before using.
  2. Long press the button for 2s to entry frequency changing mode, 50Hz and 60Hz will blink in the display, press again the button to choose the right frequency, wait till the frequency is not blinking, then you will get the frequency you want.
  3. Quick short press for 10 times to switch the voltage 100V or 110V.

Solar panel input

Use the included Anderson -> MC4 conversion cable to connect the solar panel.

  1. Solar panels can have maximum input of 500W and a maximum voltage of 50V.
  2. If exceeding the maximum voltage leads to equipment damage, it is beyond the scope of warranty.

AC Input

Use wall socket to get 700W fast charging, which can full charge from 0 to 100% in 1.5 hours.

  • The product can be charged directly by the wall socket, please do not use extension cords and cable taps. When the product is charging, do not plug other products in the same socket.
  • Please do not plug several devices together in a extension socket at once, the current will be to hight and bring damage to the cable and fire risk.
  • Do not use the same socket to connect other devices when charging this product. When the same wiring in a general household exceeds 1500W, The safety circuit breaker will be activated.

Overload protector

To protect this product, an overload protector is added. Prevent damage to the product due to excessive AC input current caused by lighting and power grid fluctuations. When such a situation occurs, the overload protector will start to cut off the AC input protect the product. Restore the AC input function of the product in the following sequence.

  1. Turn off the power button and unplug all ports.
  2. After confirming that all parts are normal, turn on the power button.
  3. Press the overload protection button to switch on the AC line to restore AC input.

Display icon introduce

Choetech-BS005-Portable-Power-Station-FIG-4

  1. Charging/using time
  2. Fan state
  3. High/low temperature protection
  4. Power percentage
  5. Total input power
  6. Total output power
  7. LED light
  8. AC output
  9. Type-c output
  10. USB output
  11. AC charging
  12. Anderson charging
  13. DC output
  14. Cigar lighten output

Display Attention

  • When the icon lights up. Please keep Air intake/outlet unobstructed.
  • When this icon lights up. Please note the device is now with hight/low temperature and will possibly stop working till the temperature back to normal standard.
  • When this icon is blinking, representant that the AC input is fault, please recheck (Power/Hz/cable)
  • When the icon is blinking, represent the output is fault, please recheck.

UPS mode

UPS function

Choetech-BS005-Portable-Power-Station-FIG-9

This product has the bypass mode, does not need to pass through the battery, can directly output from the AC. In UPS mode, when the AC input power of the mains is cut off due to a power outage, the acc input power of the mains can be used in about automatic switch to product battery power within 10 ms to ensure AC output. UPS Connections As shown in the figure below, connect the product between the socket on the wall and the electrical appliances, and the power of the product is in the ON state. When you turn on the power of the electrical appliances, it will directly use the AC power of the power grid. In this state, when the power grid is cut off, it will automatically switch to the product’s internal battery to supply power.

  • In UPS mode of The United States and Japan, the maximum power output of AC is below 1100W, and the AC output exceeds 1100W. The AC output icon “ ” blinks indicating overload.
  • In UPS mode of China, United Kingdom, Europe and South Korea, AC output of the maximum power below 1200W, AC output over 1200W, “ ” AC output icon flashes indicating overload.

Solar panel connection

Our product can be connected to solar panels and can be charge through solar panels. The solar panels produce 400 watts of power and can be fully charged in as little as 4 hours. Solar panel input can be the most maximum 500W (maximum voltage 50V)

  • Solar panel charging power, according to the weather and climate conditions.
  • Solar panel voltage exceeding 50V will damage the equipment and may not be covered by warranty.
By solar panels

Connecting Pattern 1

The area of charging

Choetech-BS005-Portable-Power-Station-FIG-10

Connecting Pattern 2

Choetech-BS005-Portable-Power-Station-FIG-11

Car charging

Choetech-BS005-Portable-Power-Station-FIG-12

This product can be charged by the cigarette lighter in the car with an ACC cable (accessory: AC hereinafter) Turn on the power of this product, connect the ACC charging cable to the cigarette lighter in the car and the Anderson interface on the side of the product, turn on the engine of the car, and the LCD of this product will show the input power.

  • On-board charging should be carried out with the car engine turned on. If the engine is not turned on, the battery might run out.
  • Car charging is usually low power of 90-120W, and the charging time will be long. If you need to quid charge, it is recommended to use the mains.

Fault resolution

Status Explanation Recover method




| ****




Output exceeds standard, short circuit

|

  1. Remove the load.
  2. Check whether the overload protector is up. If it is up, press the overload protection button is pressed, press the AC output button.
  3. If the overload protector does not spring up, directly press AC output Restore output function.

The temperature warning icon flashes and buzzes| The temperature of this product has exceeded the appropriate temperature| The temperature of this product has exceeded the appropriate temperature








Charging unavailable

| ****

Bad wire connection

| Confirm the connection status of the line and the power supply status.





Overload protection function activated

|

  1. Turn off the power button and remove cables from all ports.
  2. After verifying that all components are normal, turn on the power button.
  3. Press the overload protection button to connect the AC cable to recover AC input.

Specifications

  • Product name: 1200W Portable Power station
  • Product size: LWH=387228316mm
  • Product weight: 13.5kg
  • Capacity: 960Wh
  • AC Charging: 50/60 Hz 700W max
  • MPPT input: 11.5-50V 20A 500W max
  • AC output
  • AC output: 50/60Hz (frequency switch available), rated 1200W, 2400W peak pure sine wave. Built-in overload and short circuit protection.
  • USB: USB-A (5V 2.4A) x 2
  • Type-C: 5-20V/5.0A, PD3.0 100Wx1 ; 5-12V, PD20Wx3
  • DC 5521: 12V/3A x 2
  • Cigar lighter output: 12V/10A
  • Power off current: <500uA
  • Operating temperature: -10~40°C
  • Charging temperature: 0~40°C
  • Environment humidity: ≤90%RH
Battery specification
  • Battery type: 40135 LiFePo4
  • Single cell rated voltage: 3.2V
  • Single cell rated capacity: 20Ah
  • Battery pack rated voltage: 48V
  • Battery output voltage: 42-54V
  • Battery pack rated capacity: 960Wh

Attention

Choetech-BS005-Portable-Power-Station-FIG-25

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase. The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

  • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
  • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
  • Natural wear and aging of consumables or components during use (such as batteries, etc.).
  • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
  • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:

  • Importer: Alza.cz a.s.
  • Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
  • CIN: 27082440
The subject of the declaration
  • Title: Portable power station
  • Model / Type: BS005

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

  • Directive No. 2014/30/EU
  • Directive No. 2014/35/EU
  • Directive No. 2011/65/EU as amended 2015/863/EU

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals