BizBuddy Galaxy keeper2.0 Wireless Security Solution Instruction Manual

BizBuddy Galaxy keeper2.0 Wireless Security Solution

Install GK2.0 Controller

1. Check the number of controllers assigned per store (one per kit)
2. Installed by connecting to a power source inside a table that is close to the product

1. Check APK (check 1.33e_PRD in file name) and run

2. Allow installation of unknown apps

3. Install and open

4. Allow permission
   (If permission is not granted, the app will not be used)

5. Enter the app (initial password ‘2580’)

6. store settings

7. After entering store information, click ‘SET’

8. Approval request
   After completing step 7, approval request process is required

9. Settings *Requires a network connection (WIFi/LTE/5G)

10. Setting the alarm range

11. Start Security Features

When you turn on Galaxy Keep 2.0, the security function works.
It is not possible to use the initial password 2580, and you can use it by receiving a new password every time you enter the app.

• Rule Part 15.19(a)(3): This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.
• Rule Part 15.21:
  The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>