SLIMLINE PF AO 43-55 Wall Mount Installation Guide
- June 9, 2024
- SLIMLINE
Table of Contents
PF AO 43-55 Wall Mount
Installation Guide
PF AO 43-55 Wall Mount
PF AO Wall Mount Installation
Guide (43”-55”)
Pre-Setup
** Please read entire instruction sheet before you start.
We do not provide the screws to attach the mount to the walls. Depending on
the type of wall you are mounting onto these will have the be sourced
yourself.
Tools:** 1 x Screwdriver, 1 x Drill
Parts List:
- 1 x Wall Mount
- 3 x Security Frame Arms
- 1 x Security Bracket
- 4 x Screws
- 4 x Washers
- 4 x Spacers
- 9 x Small screws
Instructions
Step 1
Find the 400×200 VESA hole pattern on the back of the screen and remove the
four screws.
Step 2
For each screw take a washer and spacer in the formation as shown in the
diagram below and attach back onto the rear of the screen using a drill.
SCREW,
WASHER, SPACER
Step 3
Repeat this 4 times for each of the screws on the rear.
Step 4
On the wall mount find the side that has ‘Up’ printed. On the opposite side of
the bracket find the holes for the security bracket.
Step 5
Construct the security frame using the arms making sure to line up the screws
depending on the size of your screen so it looks like below. 
Step 6
On the back of the screen find the section on the rear left hand side of the
display with 4 small screws in a square formation. Remove the 2 screws nearest
the edge of the
display. 
Step 8
Lining up the holes depending on your screen size attach the larger side of
the mounting bracket to the rear of the display using the screws removed in
the previous step.
Step 9
Hang the wall mount on the wall in the desired location using your own
fixings.
Please note: We do not supply the screws for mounting to the wall
Step 10
Take the screen and using the screws we setup in steps 1-3 slide the screen
into place on the wall mount.
Step 11
The security frame attached to the wall mount and the security bracket we
attached to the screen should now line up on the side of the display. Attach
the two together with screws to secure your display to the wall mount.
