GIXIYIDY Selfie Ring Light with Tripod Instruction Manual

GIXIYIDY Selfie Ring Light with Tripod

CONTENTS

• Circular Base
• Telescoping rod with selfie light & device mount
• USB power cable (connected to the circular base and telescoping rod)
• Bluetooth® remote with strap
• CR2032 3V lithium battery (installed in remote)

FEATURES

•  10 different light colors including warm, cool, and neutral white lights
• USB cable (6 ft.)
• Telescoping stand – 28 in. to 58 in.
• 180 degrees of light rotation for different angles
• Lighting can be used with or without a device

ASSEMBLY

1. Remove all components from the box and remove any excess packaging material.
2. Place the circular base flat on the floor with the threaded opening pointing up.
3. Secure the telescoping rod by threading it into the base and rotating clockwise until it is fully flush and will no longer rotate. Please note that the power cable may protrude from the bottom of the rod making it difficult to secure it to the base. The telescoping rod can be extended slightly which will retract the cable making securing the rod to the base easier.
4. Mount the large circular selfie light to the top of the stand. The vertical slats will go in between those on the stand. Remove the bolt from the large plastic adjustment knob and insert it on the end with the hexagonal opening. Tighten and secure the selfie light to the stand by threading the large plastic adjustment knob on to the free end of the bolt clockwise until tight. This connection can be loosened when adjusting the angle of the selfie light and then tightened again to hold it in place.
5. Attach the device mount to the back of the selfie light by threading it clockwise until tight.
6. Secure the USB C male plug into the back of the selfie light.
7. Take the USB A male plug extending from the base and insert into a USB wall adapter. For best performance, use a 5V, 2A USB wall adapter. Plug the adapter into a wall outlet to power the Selfie Ring Light.
   

SAFETY WARNINGS

PLEASE READ BEFORE USE

• This is not a children’s product Keep out of reach of children.
• The product is not designed for all-weather use. Keep away from moisture and extreme temperatures.
• This item has no user-serviceable components. Do not disassemble.
• Do not use it for anything other than its intended purpose.
• Inspect the product before every use. If the product appears worn, frayed, cracked, or broken in any manner, discontinue use and discard it immediately

USING YOUR SELFIE RING LIGHT

1. To make the selfie light taller, extend the telescoping rod by gently pulling on the base of the selfie ring light. It may help to place your foot on the base as you extend the rod to prevent it from moving around.

2. To adjust the angle of the light, loosen the large, knob directly under the selfie light. Position the light at the desired angle, and then tighten the knob to hold it in place.

3. Place your device in the retractable device holder in the middle of the selfie light. This holder is spring-loaded. Pull it apart and slide your device inside. Your phone is now secure.

4. Adjust your phone orientation and position inside the light by moving the holder to the desired position.

USING THE WIRELESS REMOTE

1. There are 10 brightness levels. They can be toggled by pressing the ADJUST BRIGHTNESS button.
2. There are 3 natural light settings (warm, cool, neutral) along with color light options. They can be toggled through by pressing the CHANGE LIGHT COLOR button.
3. To control your device’s camera function wirelessly, you will need to connect your phone to the Bluetooth® Wireless remote:
   • Ensure the remote is turned on.
   • Ensure your device’s Bluetooth® is enabled and on.
   • Search for the name “SelfieRingLight” in your Bluetooth® menu and select it.
   • Your phone is now connected to the Bluetooth® remote.
4. Switch on your device’s camera function and set to photo or video.
5. The CAMERA button on the remote will now allow you to take either photos or start and stop your video camera.
6. To switch the light off, press and hold the ADJUST BRIGHTNESS button

FAQs

Why does the power cable protrude from the bottom of the telescoping rod?****

The power cable is inserted into the bottom of the telescoping rod and secured in place by a plastic nut. This nut can be removed and the cable can be retracted which will make securing the rod to the base easier.

Why does my Bluetooth® remote not pair with my smartphone?****

Please make sure that your phone has Bluetooth® capabilities. Also, make sure your phone is within 30 feet of the selfie ring light. If it still does not pair, please contact us at info@gixiyidy.com for further assistance.

How do I turn on/off my device?****

Press and hold the power button on your remote for 3 seconds to turn on or off your device.

How do I change light colors?****

Press and hold the power button on your remote for 3 seconds to cycle through all 10 light colors.

How do I adjust the brightness?****

Press and hold the power button on your remote for 3 seconds to cycle through all 10 brightness levels.

How do I adjust light rotation?****

Press and hold the power button on your remote for 3 seconds to cycle through all 10 light rotation settings (180 degrees).

What is this small black piece in my box?****

This is a rubber piece that goes between your smartphone and the selfie ring light mount to prevent scratches/damage to your phone during use.

What is the purpose of a selfie ring light?****

You may reduce shadows and get flattering light that appears to originate from all directions by positioning your camera, webcam, or smartphone in the center of the ring. This avoids the creation of shadows, harsh lines, or distracting reflections. These are the ideal instruments for enhancing your appearance on camera.

Does a selfie ring light make a difference?****

An image will become sharper, clearer, and simpler to perceive with the aid of a ring light. They’re incredibly flattering, making skin look smoother and with fewer blemishes—perfect for close-up photography and vlogging.

Can I use a ring light without electricity?****

The ring light can be used directly with electricity or with a power bank because it is rechargeable via a power bank.

Do ring lights help take better pictures?****

You may need new photographic gear if you’ve tried taking selfies with your smartphone but are unhappy with the results. You can shoot pictures and films that appear immaculate and well-illuminated by using a ring light.

Does ring light Help photos?****

Popular photography lighting, such as ring lights, can be used to provide the lovely, soft light. They give the subject’s skin a natural-looking glow, making them ideal for portraiture.

Is a selfie ring light good for makeup?****

When doing cosmetics and capturing shots of the finished product, ring lights are great. Whether you’re a YouTuber or a beauty blogger, a ring light is priceless. Ring lights eliminate sneaky shadows and properly emphasize your features since they uniformly distribute light.

Does ring light affect your eyes?****

There is no evidence that most ring light usage causes eye damage. Yet, due to the LED lights’ rapid flashing and the blue light they create, there is a real risk of eye strain and potential headaches.

Video

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>