Choetech H049 Gooseneck Magnetic Phone Mount User Manual

: June 9, 2024
: CHOETECH

Table of Contents

Choetech H049 Gooseneck Magnetic Phone Mount
Package contents
Specifications
Product diagram
How to use
Attention
Important safety instructions
Warranty Conditions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Choetech H049 Gooseneck Magnetic Phone Mount

Choetech-H049-Gooseneck-Magnetic-Phone-Mount-product

The product user guide contains product features, how to use, and the operating procedure.
Read the user manual carefully to get the best experience and avoid unnecessary damage.
Keep this manual for future reference.
If you have any questions or comments about the device, please contact the customer line.
✉www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,www.alza.cz

Package contents

1 x Magnetic Phone Mount
1 x User Manual

Specifications

Model	H049
Material	PC + ABS + Aluminium-Magnesium alloy
Adjustable Angle	360°
Clamping Thickness	7 cm
Length of Flexible Tube	100 cm

Product diagram

Tips: Please adjust the flexible tube to a U-form or an S-form to provide your phone with stronger stability, preventing your phone from dropping or shaking.

How to use

Choetech-H049-Gooseneck-Magnetic-Phone-Mount-
fig-2

Loosen the jaw
Tighten the screw
Adjust the tube
Choose a fixed point
Get it fixed
Place there your phone

Attention

This product is specially designed for the iPhone 12 series. If your phone features no magnetic attraction function, a magnetic accessory is additionally needed.
Please pay good attention to the flexible tube for its U-form and S-form are the most suitable ones.

Important safety instructions

WARNING – When using this product, basic precautions should always be followed, including the following:

a) Please read all the instructions before using the product.
b) To reduce the risk of injury, close supervision is necessary when the product is used near children.
c) Please do not insert the fingers or hands into the product.
d) Please do not expose the power bank to water (ex. rain) or cold temperature (snow).
e) Using a wall charger not recommended or sold by a power bank manufacturer may pose a risk of fire or injury.
f) Please do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of injury to persons.
g) Please do not use the power bank if it is damaged or altered. Damaged or altered batteries may exhibit unpredictable behaviour resulting in fire, explosion, or risk of injury.
h) Please don’t disassemble the power bank.
Please seek only authorized service providers when going to service or repair it required.
Incorrect reassembly may result in a risk or injury to persons.
i ) Please do not expose a power bank to fire or excessive temperature. Exposure to fire or temperature above 100°C (212°F) may cause an explosion.
j) To ensure product safety, please have the product serviced by a qualified repair person using the original manufacturer’s replacement parts.
k) Please be sure to switch off the power bank when it is not in use.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years.
If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.