THULE 901018 Basin Wedge Instructions
- June 9, 2024
- THULE
Table of Contents
THULE 901018 Basin Wedge Instructions
Roof mounted tent for car load carrier
Assembly Instructions
Video Instructions
Thule Basin Wedge
Video Instructions
Thule Mounting Bracket
Weight capacity of tent in use with people inside the tent (static EN
weight) can exceed the dynamic (driving) weight capacity. The tent’s static
weight capacity is 300 kg/ 600 lbs Recommended roof rack weight capacities can
be found on Thule.com. Check your vehicle instruction
booklet for information on recommended roof load.
Thule only recommends Thule roof rack systems for Thule rooftop tents. For other brand roof rack applications check vehicle and roof rack owner’s manual for maximum weight capacity. Thule cannot guarantee any compatibility of other roof racks and/or their load capabilities.
DO NOT use Thule rooftop tents with vehicles with glass roofs. EN Cars with sunroofs may be used but the opening function should not be used.
When mounting Thule rooftop tents to vehicles with raised side rails:
- Make sure raised rails are structurally supported.
Make sure crossbars are positioned next to supports of raised rails.
WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC. This
tent meets the flammability requirements of CPAI-84. The fabric may burn if
left in continuous contact with any flame source. The application of any
foreign substance to the tent fabric may render the flameresistant properties
ineffective.
\
DO NOT exceed the maximum weight capacity of the roof rack EN or car
roof.
Accessories
Documents / Resources
|
THULE 901018 Basin
Wedge
[pdf] Instructions
901018 Basin Wedge, 901018, Basin Wedge
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>