GAGGENAU DVP 221 Vacuuming Drawer Instruction Manual

GAGGENAU DVP 221 Vacuuming Drawer

Package Content

Dimensions

Notes on the installation instructions

Read these instructions carefully. Only then will you be able to install the appliance safely and correctly. Retain the instruction manual and assembly instructions for future use or for subsequent owners.
Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged during transport.
Dispose of the packaging in an environmentally friendly manner.
Keep the packaging material away from children.
You must note the following
Electrical connection
The appliance must only be connected to a earthing contact socket that has been correctly installed. A socket must only be installed or the power cable replaced if this is carried out by a qualified electrician, and in accordance with the appropriate regulations.
The appliance must only be connected using the power cable provided. Connect the power cable to the back of the appliance.
Connecting cables with various plug types are available from after sales service.
No multi-plugs, multiple connectors or extension leads may be used. Overloading causes a risk of fire.
If the plug can no longer be reached after the installation, a partition must be provided in the phases in the permanent electrical installation in accordance with the installation regulations.
Fitted units
Do not install the appliance behind the door of a unit.
Read the information in the installation instructions for the appliance you want to combine with the drawer.
When installing below the worktop
If the worktop overlaps with the furniture cavity by too much, this may lead to collisions with the glass cover in the vacuum-sealing drawer. Observe the maximum possible dimension.

Before the installation

Notes
A pump that contains oil is installed in the appliance. If the incline is too great, this oil may flow out of the pump. Do not tip the appliance or upend it.
Use a suitable tool to remove the transport locks and install the oil filter.
Do not move the appliance if the transport locks for the pump are not installed. The oil from the vacuum pump may leak out when it is tipped or tilted, and may damage the appliance. When uninstalling the appliance, re- attach the transport locks before moving it.

1. Carefully lift the appliance out of the packaging.

2. Remove the transport lock for the pump from the top of the appliance.
   The transport lock can be secured to the rear of the appliance for future use.

3. Install the oil filter.

4. Place the lid into the opening and move it to the left.

5. Remove the transport lock screws.

Using the appliance

Caution!
If there is no tilt protection, the appliance will tip when the drawer is open. Only open the drawer if the tilt protection is installed.

Procedure

1. Install the tilt protection.
   Note: The height of the tilt protection can be adjusted to make it easier to slide the appliance into the kitchen unit.

2. Connect the appliance.

3. Slide the appliance into the unit.
   Note: Make sure that the power cable is not pinched, trapped or kinked.

4. Centre the appliance.

5. Carefully open the drawer. Check whether the appliance is properly protected against tilting.

6. Screw the appliance into place
   

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>