SHENZHEN YUJIE TECHNOLOGY CO LTD PO1 Magnetic Wireless Power Bank User Guide

SHENZHEN YUJIE TECHNOLOGY CO LTD PO1 Magnetic Wireless Power Bank

Product Overview

• Stronger Magnetic: Connection
• 12-Month Hassle-Free: Warranty
• Fast charging: technology

Parameters

• Product Name: Magnetic wireless power bank
• Model No. : PO1
• USB-C Input: 5V=2.4A
• USB-C Output: 5V=3A
• Wireless Output: 7.5W/5W
• Battery Iype: Lithium Polymer
• Battery Capacity: 5000mAh
• Ratted Capacity: 3000mAh(5V=2.4A)
• Dimension: 106.6 X 67.3 X 15.5mm
• Product Weight: 145g
• Material: PC

Note: When two device outputs (including wireless charging) are used at the same time, the product will enter the normal charging state of 5V, and the wireless charging will be automatically converted to 5W;

Operation instructions:

This moble power bank has a bulit-in magnet, supported for iphonel2, 13 series cel phone magnefic charging: Combined with the daily needs, you can turn on the low-current mode to charge the TWS headset case steadily or charge the mobile power bank while charging for your phone (support charging and getting charged af the same fime).

The specific operations are as follows:

1. While power is of, short press the switch button to tun on the power, after switched on, LEDs wilight on from left to right in order; the number of LED lights is related to the remaining battery, each LED light represents 25% of battery
2. Affer pOwer on, the LED lights ill be off automatically after 18s when not charging for any electrical device, the LED lights will be constantly on while charging for any electrical device;
3. Tun low-Current mode on or off: While power is on, press and hold the on/off button for 3 seconds fo furn on the low-Current mode, and then the LEDS will ight up from left fo right in order, and after the 4th LED lights up for 6 seconds, the LEDs will al go off, and then the lights will be triggered again (from leftto right, light up in order), and vice versa; After turning on thelow-current mode, no longer required fo presS on the on/off button, the mobile power bank wll automatically fun off the low-current mode after 2 hours. After the lo-current mode is turned on, press and hold the on/off button for 3 seconds to turn off this mode.
4. Wireless charging:After switch on the product will automatically launch wireless charging mode, then put the iPhone onto the charging area, where the fist LED green light will be Constantly on
5. Foreign object detection: While pOwer is on, whenever there is a metal foreign object placed in the wireless charging area, the fist LED will continue to flash in green light (alam), where the mobile power bank wil not have any output; remove the metal foreign object 3 seconds after the alam is lifted.
6. Double fap on the switch button to tun off the mobile power bank, where the LED ights will tun off from right to left in orde.

Warning

• Please do not disassemble, or repair products by
  yourself

• Please do not put it into high temperature or wet
  surrounding, like fire, sunshine or wate. prevent power banks cause short circuit please don’t put several power banks together or With other metals together in one same small space (like a box or locker).

• Do not subject the power bank supply to mechanical shock.

• Once there is leakage happened, please avoid touching the liquid by skin or eye, if touch it by accident, please rinse with a lot of water.

• Please follow the manufacture’s usage to charge the power bank.

• Please notice the mark on the power bank, make sure right usage.

• Please keep it cledn and dry

• Please don’t charge the power bank fora long time.

• Charge or discharge under condition 15 C ~ 35 C, can get the best efticency and service life–The best usage efficency usage

• Please keep the instruction well for reference.

• Piease dispose of the power bank according to the national environmental regulations.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules Operation is sulbject to the following tWO conditions

1. this device may nof cause harmful interference, and
2.  this device must accept any inferterence received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the parly responsible for compliance could void the users authority fo operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits fr a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable profection against hamíul interference in a residenfial installation. Ihis equipmenf generafes, uses instructions, may cause harmful interference to radio  Communications. However, there is no guarantee thaf interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged fo try to Correct the inferference by one or more of the following measures:

• Reorient or relocate the recelving antenna.
• Increase the separation between the equipment and recever
• Connecf the equipment info an ouilef on a circuif dlifferent from thaf fo which the receiver is connected.
• Consulf the dedler or an experienced radio/IV fechnician for help.

FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>