NightSearcher SL1600 Professional Rechargeable Searchlight User Manual
- June 4, 2024
- NightSearcher
Table of Contents
NightSearcher SL1600 Professional Rechargeable Searchlight
Safety Warning:
-
Do not expose the battery to fire/high temperatures or extreme wet/cold conditions.
-
Do not point the searchlight directly to people’s eyes since it will impair eyesight.
-
Do not stare into light beam.
-
Do not solder directly on to the battery.
-
Do not let the battery become wet or immerse the battery in water.
-
Do not dispose of the battery in the domestic waste, please use the correct method of disposal.
-
Do not operate with a damaged charging lead. Replace the lead immediately if it appears damaged.
-
Unplug your product from any power source before attempting any routine cleaning or maintenance.
-
Do not try to repair the unit or charger yourself. In case of any problems or questions please contact NightSearcher Limited or an authorised distributor.
Note: Ensure the battery is charged every 3 months, when storing for long periods.
Power Bank -
Plug the USB plug into the USB Port on the side of the SL1600 6.
-
Plug the smaller end of the charging cord into device to be charged.
-
To reduce charging time be sure the Searchlight is not on.
Safe disposal of waste electrical products and batteries
If at any time, you need to dispose of this product or parts of this product:
please note that waste electrical products batteries should not be disposed of
with ordinary household waste. Recycle where facilities exist. Check with your
local authority for recycling advice. Alternatively, NightSearcher is happy to
take receipt of this product at end-of-life and will recycle it on your
behalf.
PRODUCT DESCRIPTION
-
Swivel stand
-
Battery status Indicator
-
Handle button
-
High/Off/ Amber switch
-
DC Input
-
Power bank
-
Flashing amber light
Battery Charging
- When using the searchlight for the first time or if it has not been used it for a long time, you need to fully charge the searchlight for 6 hours before use.
- Ensure lamp is switched OFF before charging.
- Insert mains charging lead into the SL1600 5, connect the mains plug to a 240V AC mains socket or connect the 12V DC charging lead into the SL1600, connect the DC plug into a cigarette lighter socket.
- When your searchlight is charging, the LED indication light (located on the lamp) 2 will illuminate (RED) The charging light will illuminate (GREEN) once the searchlight is fully charged.
Note: It is not recommended to frequently leave on charge for extended charge periods nor to leave on permanent charge. When not in use, your charger should be disconnected from the mains supply this will help to prolong the battery life.
Operational Instructions
- The light has two light modes of operation: High and Amber flashing light.
- Press the switch to ‘i’ 4 to enter High mode
- Press the switch to ‘‘II’ 4 to enter Amber flashing mode
- Press switch to ‘o’ 4 to turn the searchlight off.
- To adjust the handle, use the handle button to release the lock 3. Turn the handle to the desired position and release the button to lock the position.
Warranty Terms – Standard 3 years
All NightSearcher products have a 3-year standard warranty on all manufacturing defects and 1-year warranty on all rechargeable batteries from the date of purchase.
Extended Warranty:
You have the option to extend the warranty of the product to 5 years for
manufacturing defects. Registration of the product must be made within one
month of purchase by sending us an email
[email protected]. In the message please
state in your own words that you would like to register your NightSearcher
product for the extended warranty.
To view NightSearcher’s warranty policy, please visit:
http://nightsearcher.com/en/warranty.html or scan the QR code.