Lenovo XT83 TWS Earbuds bluetooth 5.0 Earphone-Complete Features/Owner’s Manual
- June 4, 2024
- Lenovo
Table of Contents
Lenovo XT83 TWS Earbuds Bluetooth 5.0 Earphone
Specifications
-
Item Name
Bluetooth Earphones -
Material
ABS -
Bluetooth Version
5 -
Transmission Distance
10m -
Speaker Diameter
10mm -
Music Playing Time
about 3.5 Hours -
Standby Time
about 120 Hours -
Charging Time
about 1 Hour -
Earphones Battery
Built-in 40mAh Rechargeable Battery(Included) -
Charging Box Battery
Built-in 300mAh Rechargeable Battery(Included) -
Dual-frequency Driver Size
10mm -
Size Details
5.6cm x 4.6cm x 2.5cm/2.2″ x 1.81″ x 0.98″ (Approx.) -
Brand
Lenovo
Introduction
It is a Bluetooth earphone with a compact and lightweight design that you can take with you to listen to music wherever you go. Bluetooth 5.0 version supports quick connections, efficiency and minimal latency.
What’s In the Box?
-
2 x Bluetooth Earphones
-
1 x Charging Box
-
1 x Charging Cable
-
1 x User Manual
HiFi sound quality
13mm large dynamic speaker with high-elastic PU symbol composite diaphragm,
three-frequency equalization technology, enjoy HiFi sound quality.
How to Use
CHARGING CASE TO CHARGE
- Connect the lightning cord to the charging case’s lightning connector.
- Connect the cable’s USB connector to a USB power source.
- When the charging case is charging, the indication light will be RED; depending on how much power is given to the charging case, the charging case may take up to two hours to fully charge.
- When the case is fully charged, the indicator light will turn solid blue, then blink before turning off.
TURN ON
When the BLUE light turns on and a voice prompt says, “POWER ON,” release the multi-function key on BOTH the L and R earphones.
POWER OFF
- TWS mode (Due-ear) For 3 seconds, press and hold the multi-function key on either earphone. Release using the spoken command “POWER OFF” when the red indicator light is on. mode of independent use (Single Ear, L or R)
- On the utilized earphone, press and hold the multi-function key for three seconds. Release using the spoken command “POWER OFF” when the red indicator light is on.
- The battery state of the headphones is visible on linked devices. When the battery is low, the earphones will warn you with a voice prompt: “LOW BATTERY, PLEASE CHARGE,” so make sure to recharge them in a timely manner.
Frequently Asked Questions
How do you tell if the battery on your Lenovo earbuds is full?
As the earphones charge, the LED indicator will glow red. The red light will go out when charging is finished.
How long does it take for Lenovo earbuds to charge?
2 hours of charging battery life of 12 hours USB Type-C, sensor port for charging, and 300 mAh case battery Bass increase, stereo surround HiFi sound quality, IPX4 waterproof, sweat-proof, etc.
How do you check the battery level of your wireless earbuds?
When your earbuds are plugged in and charging, the charging case will blink red. The light will cease flickering and remain a solid red color when it is completely charged.
How are the Lenovo True Wireless Earbuds turned on?
Once you remove the earphones from the charging case, they will immediately turn on. The earphones will emit the prompt sound “Power On.” Put your earbuds back in the charging case if they are not already there before picking them up again.
Can I charge the case and my earbuds at the same time?
Fortunately, you can charge your case and headphones simultaneously. Open the earphone charging case that was included with your headphones first. Put the buds in the case’s respective slots. Next, secure the lid.
Should I always have earbuds on hand?
The majority of cases have a lithium-ion battery that keeps the earphones charging until they are fully charged. The earbuds should always be kept on hand just in case.
Without a case, how do TWS earbuds get charged?
You must connect a Micro USB cable to your device and either a computer or a USB adapter in order to charge earbuds with a micro USB. After that, you must wait while your earbuds fully charge.
Do Lenovo earbuds work well?
Yes, it is a wise purchase that satisfies sound quality fans with a wonderful blend of dynamic drivers that produce good sound quality and stylish design. Although they are inexpensive, these earbuds offer you every feature a pair of wireless headphones should have.
Why do my earbuds have blue light?
The headphones may be in pairing mode if they have a slow blue light that pulses. Blinking red and blue lights are the most typical pairing mode light pattern. To see if the flashing blue light stops after your headphones are linked to another device, you might still want to try pairing them with another device. It can indicate interference.
What does TWS mean?
Bluetooth signals are used in True Wireless Stereo (TWS) to transmit sound instead of wires or cables. TWS is distinct from wireless accessories that do not rely on physical connections to media sources but still require such connections to make sure that various components of a device can work together.
How do you use the TWS function?
Press the “Power On” button on each speaker repeatedly until you hear the confirmation, “Power on, your speaker is ready to pair.” Any of the speakers’ “Mode” buttons should be long-pressed until you hear “Connected successfully.” The TWS mode of your speakers is currently established.
The TWS button is what?
You may enjoy full stereo sound quality without the necessity of cables or wires thanks to a special Bluetooth function known as True Wireless Stereo (TWS). This is how TWS operates: You connect your favorite Bluetooth music source to a primary Bluetooth speaker.
How are TWS earbuds reset?
Take out the earphones from the case, then turn them off by pressing the buttons for a short period of time. Hold down the buttons on both earbuds for around 5 seconds starting with the earbuds in the OFF position. Approximately 5 seconds after turning white, the LEDs will switch off. Your earbuds will reset as a result.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>