NightSearcher NSPRO250 Pro 250 Rechargeable SMD LED USB Inspection Lamp User Manual
- June 4, 2024
- NightSearcher
Table of Contents
NSPRO250
USER MANUAL
Specifications
Light Output + Source| Floodlight: 250 Lumens
Torch Light: 60Lumens
---|---
Beam Distance| 5m beam
Run Times.| Floodlight: Full 2.5hrs Torch 6hrs.
Charge Time| 4-5hrs
Product size (mm)| L:196mm x D:80mm x H.80mm
weight (g) : Product| 320g including charging base
NS Part No.| NSPRO250
Supplied with| Supplied with: Charging Base, Micro USB Charging Cable, AC
Power Supply + 12/24V DC Vehicle Adaptor
Certifications
| REACH | Approved |
|---|---|
| Rohs | Approved |
| CE | Approved |
Before using your NightSearcher product, please read this user manual, it contains important safety information and operating instructions. Following this advice will help ensure that your product operates to its maximum potential.
LED Assembly Replacement:
The Light Emitting Diodes (LED) can last 30,000hrs. If there is any malfunction of the LED, please contact Nightsearcher Limited or an authorized distributor.
Warning:
-
This LED Inspection Lamp must be fully recharged before first use to maximize battery life.
-
This lamp cannot be used whilst charging.
-
The battery will reach optimum performance once 4-5 complete cycles have been completed (charge & discharge). 100-240V Mains Charging:
-
Insert mains charging lead into the Pro250 or charging bracket (place Pro250 in charger).
-
Connect the mains plug to a 240V AC mains socket.
-
Switch on mains power
– Red light on the lamp will illuminate whilst the lamp is charging.
– Green light on the lamp will illuminate once fully recharged. -
When fully charged turn off the AC mains power and disconnect the lead from the Pro250.
12V/24V Charging:
-
Connect the 12V/24V DC charging lead into the Pro250.
-
Connect the DC plug into a cigarette lighter socket.
– Red light on the lamp will illuminate whilst the Pro250 is charging.
– Green light on the lamp will illuminate once fully recharged. -
When fully charged disconnect the lead from the Pro250 and unplug lead from a socket.
Operation:
- Press the power button once time to turn the floodlight on.
- Press the power button a second time to turn the torchlight on.
- Press the power button a third time off the torch light.
- Do not use any chargers other than those provided. Failure to do so could cause fire, electrical shock or personal injury.
- Do not use if the charging adaptor is broken or damaged in any way.
- Do not try to repair the unit or adaptor yourself. Please contact NightSearcher or an authorized distributor.
Safe disposal of waste electrical products, batteries, and bulbs
If at any time, you need to dispose of this product or parts of this product:
Please note that waste electrical products, bulbs and batteries should not be
disposed of with ordinary household waste. Recycle where facilities exist.
Check with your local authority for recycling advice. Alternatively,
NightSearcher is happy to take receipt of this product at end-of-life and will
recycle it on your behalf.
Warranty:
All NightSearcher products have a 3-year standard warranty on all manufacturing defects and a 1-year warranty on all rechargeable batteries from the date of purchase.
http://nightsearcher.com/en/warranty.html
Extended Warranty:
You have the option to extend the warranty of the product to 5 years for
manufacturing defects. Registration of the product must be made within one
month of purchase by sending us an email
sales@nightsearcher.co.uk. In the message
please state in your own words that you would like to register your
NightSearcher product for the extended warranty.
To view NightSearcher’s warranty policy, please visit:
http://nightsearcher.com/en/warranty.html or scan the QR code.
NightSearcher Limited, Unit 4 Applied House, Fitzherbert Spur, Farlington,
Portsmouth, Hampshire, PO6 1TT, UK
T: +44 (0)23 9238 9774
• E: sales@nightsearcher.co.uk
• W: www.nightsearcher.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>