Choetech BS006 Portable Power Station User Manual

Portable power station
User Manual

BS006 Portable Power Station

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
Thank you very much for purchasing 2000 W power station. Be sure to read this manual carefully before using the product to use the product correctly. This manual is needed for product after-sales service. Please keep this manual together with the invoice and other purchase certificates.
To ensure the safety of this product during transportation, this product is only charged about 30 % when it is packaged. Please recharge when you get the product.
The product can be charged directly by the wall socket, please do not use extension cords and cable taps. When the product is charging, do not plug other products in the same socket.

Warning

1. Please avoid using product near high temperature, high humidity, direct sun environment and fireplace.

2. Do not disassemble or modify this product, it will cause malfunction and fire.

3. Please discard or recycle the product according to the methods prescribed by local laws.

4. Be careful not to drop the product from a high place and give the product a strong impact.

5. Keep or use the product in a place out of the reach of children.

6. Please use our company’s genuine accessories. The damage caused by using of nongenuine accessories cannot be repaired free of charge.

7. Please leave a space of about 30 cm away from the side suction and exhaust ports, so as not to affect the heat dissipation of the product.

8. When not using this product, please turn off the power and unplug the power cord.
   Please avoid storing the product in a place exposed to direct sunlight with high temperature and humidity.

9. For long-term storage, please consume power from full power to no power once every 3 months, and then recharge to about 50 %.

10. Please do not use this product and its accessory cables and connecting equipment when there is a defect.

11. Please do not store the product for a long time in extremely high and low temperature places such as in the car and in the field warehouse to avoid shortening the battery life.

AC output parameter

Package list

Product introduction

This product is a 1997 Wh large capacity 2000 W high power, 2 hours of high- speed charging portable energy storage power supply, using high safety performance of LiFePo4 battery.
IT can be used as a backup power supply in case of emergency power cut, disaster, camping and vehicles, and can also provide power for various electric tools.
2000 W high power, pure sine wave AC output, can be used for house-hold applications such as dryers, microwave ovens, refrigerators, high-power induction cookers and it can also be used for other electronic devices such as personal computers.
Through the 1100 W ultra-fast charging, this model can be full charged within 2 hours, the AC input/output voltage frequency can automatic or manually switched between 50 Hz/60 Hz. This product also supports maximum 500 W solar charge, allow you to charge even when the power cut or in outdoor situations.

1. Main power control
2. Light control
3. USB control
4. DC control
5. LCD display
   | 6) Air intake/outlet
6. AC on/off control (50 Hz/60 Hz switching control)
7. Anderson input port (for solar panel)
8. AC input port
9. Overload protection
   ---|---

1. Main power control
   Main control for the whole system turns on/off.
   Operate method: long press the button for 3 s to turn on/off the system.

2. LED light control
   Operate method: short press to turn on and charge the light mode (SOS/Flash).
   Notice: you can turn off the light by long press the button (1-2 s) in any mode.

3. USB button
   Operate method: short press to turn on/off.| |
   ---|---|---
   USB-A x 2
   5 V/2.4 A| USB-A x 2
   QC3.0-18 W| Type-C x 2
   PD-100 W

4. DC button
   Operate method: short press to turn on/off.

| |
---|---|---
Output x 2
12 V/3 A| Cigar Lighter x 1
12 V/10 A| XT60 x 1
12 V/25 A
5. LCD display
Present the remaining power and using data.

6. Cooling system
   When the fans are working, please don’t block the channel.

7. AC button (AC output, total share 2000 W)
   Operate method: short press to turn on/off.
   Notice:

8. Please confirm the output voltage or frequency before using.

9. Long press the button for 2 s to entry the frequency changing mode, 50 Hz and 60 Hz will blink in the display, press again the button to choose the right frequency wait till the frequency is not blinking, then you will get the frequency you want.

10. Quick short press for 10 times to switch the voltage 100 V or 110 V.

11. Solar panel input
    Use the included Anerson→MC4 conversion cable to connect the solar panel.

12. Solar panels can have a maximum input of 500 W and a maximum voltage of 50 V.

13. If exceeding the maximum voltage leads to equipment damage, it is beyond the scope of warranty.

14. AC input
    Use wall socket to get 1100 W fast charging, which can full charge from 0 to 100 % in 2 hours.
    – The product can be charged directly by the wall socket, please do not use extension cords and cable taps. When the product is charging, do not plug other products in the same socket.
    – Please do not plug several devices together in an extension socket at once, the current will be too high and bring damage to the cable and fire risk.
    – Do not use the same socket to connect other devices when charging this product. When the same wiring in a general household exceeds 1500 W. The safety circuit breaker will be activated.

15. Overload protector
    To protect this product, an overload protector is added. Prevent damage to the product due to excessive AC input current caused by lighting and power grid fluctuations. When such a situation occurs, the overload protector will start to cut off the AC input to protect the product.
    Restore the AC input function of the product in the following sequence.

16. Turn off the power button and unplug all ports.

17. After confirming that all parts are normal, turn on the power button.

18. Press the overload protection button to switch on the AC line to restore AC input.

Display icon introduce

1. Charging/using time
2. Fan state
3. High/low temperature protection
4. Power percentage
5. Total input power
6. Total output power
7. LED light
8. AC output| 9) Type-C output
9. USB output
10. AC charging
11. Anderson charging
12. DC output
13. Cigar lighter output
14. XT-60 output
    ---|---

Display attention

| When this icon lights up. Please keep Air intake/outlet unobstructed.
---|---
| When this icon lights up. Please note the device is now with high/low temperature and will possibly stop working till temperature back to normal standard.
| When this icon is blinking, represent that the AC input is fault please recheck (Power/Hz/cable).
| When the icon is blinking, represent the output is fault, please recheck.

UPS mode

UPS function
This product has the bypass mode, does not need to pass through the battery, can directly output from the AC.
In UPS mode, when the AC input power of the mains is cut off due to a power outage, the AC input power of the mains can be used in about automatic switch to product battery power within 10ms to ensure Ac output.
UPS connections
As shown in the figure below, connect the product between the socket on the wall and the electrical appliances, and the power of the product is in the ON state. When you turn on the power of the electrical appliances, it will directly use the AC power of the power grid.
In this state, when the power grid is cut off, it will automatically switch to the product’s internal battery to supply power.

• In UPS mode of The United States and Japan, the maximum power output of AC is below 1100 W, and the AC output exceeds 1100 W. The AC output icon “ ” blinks indicating overload.
• In UPS mode of China, United Kingdom, Europe and South Korea, AC output of the maximum power below 2000 W, AC output over 2000 W, “ ” AC output icon flashes indicating overload.

Solar panel connection

Our products can be connected to solar panels and can be charged through solar panels.
The solar panels produce 400 watts of power and can be fully charged in as little as five hours. (Solar panel input can be the most maximum 500 W (maximum voltage 50 V))

• Solar panel charging power, according to the weather and climate conditions.
• Solar panel voltage exceeding 50 V will damage the equipment and may not be covered by warranty.

By solar panels
Connecting pattern (1)

Connecting patter (2)
The area of charging

![Choetech BS006 Portable Power Station

• Connecting pattern 3](https://manuals.plus/wp-content/uploads/2023/02 /Choetech-BS006-Portable-Power-Station-Connecting-pattern-3.jpg)

Car charging

This product can be charged by the cigarette lighter in the car with an ACC cable (accessory: ACC hereinafter).
Turn on the power of this product, connect the ACC charging cable to the cigarette lighter in the car and the Anderson interface on the side of the product, turn on the engine of the car, and the LED of this product will show the input power.
On-board charging should be carried out with the car engine turned on. If the engine is not turned on, the battery might run out.
Car charging is usually low power of 90-120 W, and the charging time will be long. If you need quick charge, it is recommended to use the mains.

Specifications

W peak pure sine wave
(built-in overload and short circuit protection)
USB QC3.0:| 18 W x 2
USB:| USB-A (5 V 2.4 A) x 2
Type-C:| 5-20 V/5.0 A, 100 W max (PD3.0)
DC 5521:| 12 V/3 A x 2
XT-60 output:| 12 V/25 A
Cigar lighter output:| 12 V/10 A
Power off current:| <500 uA
Operating temperature:| -10~40˚C
Environment humidity:| ≤90 % RH

Battery specification

Fault resolution

Above icon flashes and buzzes.

The temperature warning icon flashes and buzzes.

| Output exceeds standard, short circuit.
The temperature of this product has exceeded the
appropriate temperature.| 1. Remove the load.
2. Check whether the overload protector is up. If it is up, press the overload protection button is
pressed, press the AC output button.
3. If the overload protector does not spring up, directly press AC output restore output function.
Remove the equipment, turn off the power of this product, and wait for the equipment to reach
the appropriate temperature.
Charging unavailable.| Bad wire connection.| Confirm the connection status of the line and the power supply status.
Overload protection function activated.| 1. Turn off the power button and remove cables from all ports.
2. After verifying that all components are normal, turn on the power button.
3. Press the overload protection button to connect the AC cable to recover AC input.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.

• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by
  inappropriate means, etc.).

• Natural wear and aging of consumables or components during use (such as batteries, etc.).

• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.

• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Portable power station
Model / Type: BS-006
The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):
Directive No. 2014/30/EU
Directive No. 2014/35/EU
Directive No. 2011/65/EU as amended 2015/863/EU
Prague

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

✉www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz

Documents / Resources

| Choetech BS006 Portable Power Station [pdf] User Manual
BS006 Portable Power Station, BS006, Portable Power Station, Power Station, Station
---|---

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>