ObowAi QC01 Intelligent Sweeping Robot Vacuum Cleaner User Manual
- June 9, 2024
- ObowAi
Table of Contents
ObowAi QC01 Intelligent Sweeping Robot Vacuum Cleaner
Product Certification
- Product Name: Intelligent Sweeping Robot
- Model Number:
- Production Date:
- Inspector: QCOl
This product has been inspected to meet the stipulated quality standards and is granted to leave the factory.
Thanks for purchasing Intelligent Sweeping Robot!
Hope you enjoy it.
Be careful! Battery leakage exudate can cause human injury!lf the battery
leaks exudate, make sure it doesn’t come out to contact with the eyes or skin.
In case of contact, wash hands and eyes with clean water immediately. If you
still feel unwell, seek medical advice immediately.
| Component Sort | Hazardous Substance |
|---|---|
| Lead (Pb) and its compounds | Mercury (Hg) and **its |
| compounds** | Cadmium (Cd) and its compounds |
| C h romium (Cr (VI)) and its compounds | Po l yb |
| ro mobiphe nyl (PBB) | Polybro mi n ate d |
Diphenyl Ether (PBDE)
Plastic Parts| 0| 0| 0| 0| 0| 0
Hardware| X| 0| 0| 0| 0| 0
Main Engine
Circuit Module| X| 0| 0| 0| 0| 0
Electronic Components| 0| 0| X| 0| 0| 0
Battery| 0| 0| 0| 0| 0| 0
Plug Power Cord {Metal Part)| X| 0| 0| 0| 0| 0
Note: This form is compiled in accordance with SJ/T 11364.
0:Indicate that the content of the hazardous substance in all homogeneous
materials of the part is below the limit specified in the current valid
version of GB/T 26572.
x:Indicate that the content of the hazardous substance in at least one of the
materials of the part exceeds the limit requirement specified in the current
valid version of GB/T 26572, and there is no mature alternative solution in
the industry, which meets the environmental requirements of the eu RoHS
directive.
Product use/APP download and connection
Phone APP operation steps:
- The mobile phone scans the QR code, download and install the product APP.
- Make sure that the power of the sweeping robot is sufficient. Master switch 0 According to the”-” state.
- Open the APP to connect the sweeping robot.
Product Usage/Operation Procedure
- Bottom master switch According to the”-” state.
- Boot mode one: Press cleaning robot power switch start.
- Boot mode two: The key to operating the APP Start the sweeping robot.
- Mop Function: Paste Mopping Cloth on the bottom of the product.
- When the indicator light is blue and flashes , the product will stop working. The indicator light will be red when the product is charging, and will go out when the product is fully charged.
- CD Open the magnetic cover, Raise upward the dust box, Open the dust box to take out the garbage and reload the box for next use.
Product Parameter
Product Model|
---|---
Charge Time (h)| s
Product Dimensions| 278x278x68mm
Battery Capacity| 3000mAh,ll.lWH
- Charging at a voltage above 5V is prohibited!
- Due to the need of continuous improvement of the products, the products in the manual are in kind. We reserve the right to update the products.
Phone APP function
Product Composition/Packaging Contents
| Serial Number | Description | Quantity |
|---|---|---|
| 1 | Main Engine (including Battery) | 1 |
| 2 | Brush | 1 |
| 3 | USB Cable | 1 |
| 4 | Operating Manual | 1 |
| 5 | Mopping Cloth | 1 |
Machine Front View
Machine Bottom View
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuan t to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterferenc e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different f rom that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>