GAGGENAU AL200180 Table Ventilation 200 Series Instruction Manual
- June 9, 2024
- Gaggenau
Table of Contents
Color Variants AL200180
AL200180
Table ventilation 200 series
AL200180 Table Ventilation 200 Series
Width 80 cm
Gaggenau Black
Air extraction / Air recirculation
Extendable table ventilation, when not in use can be completely lowered into
the worktop Perfect in combination with frameless induction cooktops 80 cm
wide for flush mounting Transparent ventilation screen for discreet
integration in the kitchen space Ambient lighting elegantly surrounds the
glass edges for a striking appearance Guided Air technology ensures high
vapour catch rate across the whole cooktop
Output
Air extraction (min/max) according to
EN 61591: 223 / 775m³/h.
Noise (min/max):39 / 70 dB (A) re 1 pW.
Air recirculation (min/max) according to EN 61591 (with standard filters): 170
/ 562m³/h.
Noise recirculation (min/max):43 / 70 dB (A) re 1 pW.
Features
Cooktop-based ventilation control.
Automatic function with sensorcontrolled run-on function. 3 electronically
controlled power levels and 1 intensive mode.
Grease filter saturation indicator. Activated charcoal filter saturation
indicator. 2 large-scale metal grease filters included, easy to remove,
dishwashersafe. Overflow capacity 170 ml in grease filter. Additional capacity
600 ml in the remote fan unit. Activated charcoal filter easily removeable
from above for air recirculation system. Gaggenau Black anodized aluminium
frame. 1 user interface to set the power levels and 1 user interface to
control the Guided Air technology. Fan technology with highly efficient,
brushless DC motor (BLDC). Flexible installation of the fan unit at the front
(for a compact wall solution), at the back (without loss of drawer space), or
at a distance from the appliance. Home network integration for digital
services (Home Connect) wireless via WiFi. The use of the Home Connect
functionality depends on the Home Connect services, which are not available in
every country.
For further information please check:
homeconnect.com.
Performance
Must be ordered & installed with one of the following Gaggenau kits: CA084010 installation kit for fully ducted extraction. CA082010 installation kit for air recirculation. CA082020 installation kit for partially ducted recirculation. All further necessary flat ducting elements (DN 150) must be ordered separately. Compatible with 80cm frameless cooktops 400 series (CX 482) or 200 series (CI 282), in a single worktop cutout.
Characteristics
Product name/family
Color chimney
| Typology | Downdraft |
|---|---|
| Length electrical supply cord | 130 |
| Min. required niche size for installation (HxWxD) | 703mm x 781.0mm x |
123mm
Height of the chimney
Height of product, without chimney
| Minimum distance above an electric hob | 600 |
|---|
Minimum distance above a gas hob
| Net weight | 35.7 |
|---|---|
| Type of control | Electronic |
| Number of speed settings | 3-stage + 2 intensive |
| Maximum output air extraction | 501 |
| Boost position output recirculating | 525 |
| Maximum output recirculating air | 416 |
| Boost position air extraction | 775 |
Number of lights
| Noise level | 62 |
|---|---|
| Diameter of air outlet | 150 |
| Grease filter material | Washable stainless steel |
| EAN code | 4242006292812 |
| Connection Rating | 300 |
| Fuse protection | 10 |
| Voltage | 220-240 |
| Frequency | 50; 60 |
| Plug type | Gardy plug w/ earthing |
| Installation typology | Built-in |
Included accessories
Consumption and connection features
For installation in a single worktop cut-out the installation accessory
VA200080 must be placed between the appliances. This includes a connection
strip and furniture supports that ensure cabinet stability.
The table ventilation can be installed in the cabinet or between two (e.g. for
an island installation deeper than 100 cm).
No upper cabinets should be installed above the table ventilation to maintain
optimum performance.
The following distance should be observed: – 50 cm left and right of the table
ventilation to the wall or neighbouring tall cabinets. – 5 cm from the table
ventilation frame to the wall. Installation is possible in worktops made of
stone, synthetics or solid wood. Heat resistance and watertight sealing of the
cut edges must be observed. Concerning other materials please consult the
worktop manufacturer.
To install the fan unit at a distance, an installation kit AA200910 is
required (with spare covers for closing air outlets). Maximum distance 3 m.
In air extraction a one-way flap with a maximum opening pressure of 65 Pa
should be installed.
In air extraction mode, always ensure adequate fresh air in the room if the
appliance is being operated at the same time as a chimney-vented fireplace.
For optimum performance in air recirculation we recommend an outflow surface
area of at least 440 cm². For air recirculation an air recirculation module
(AA200880 or AA200882) is required.
Connection
Total connected load 300 W. Power consumption standby/display off 0.4 W.
A: 5.5 mm
B: Installation of fan unit on front/rear or offset laterally with max. 3
m clearance (special accessory required)
Fan unit must always be accessible
Measurements in mm
AL 200 in combination with frameless cooktop CX 482 / Ci 282 / Cl 283 in a
single cut-out
Flush installation
Side view
A: Front thickness
6: ≥ 60 mm for air recirculation
≥ 100 mm for air extraction with ducting in the plinth
C: ≥ 850 mm for air extraction with ducting in the plinth
D: ≥ 20 mm from the Guided Air suction area to a cabinet wall
Measurements in mm
AL 200 in combination with frameless cooktop CX 482 / Cl 282 /Cl 283 in a
single cut-out
Flush installation
View from above
A: Front
Measurements in mm
AL 200 in combination with frameless cooktop CX 482 / Cl 282 /Cl 283 in a
single cut-out
Flush installation
AL 200 in combination with frameless cooktop CX 482 / Cl 282 /Cl 283 in a
single cut-out
Flush installation
Cross section
A: 6.5°°5 mm
B: 2.5mm
C: Fill with silicone
D: Front
E: Table ventilation
F: Induction cooktop
Measurements in mm
AL 200 in combination with induction cooktop in 2 separate cut-outs
Surface installation
Measurements in mm
AL 200 in combination with induction cooktop in 2 separate cut-outs
View from above
AL 200 in combination with induction cooktop in 2 separate cut-outs
Flush installation
A: Incl. 2 mm silicone joint all around
B: 5.5mm
C: 9.5 mm
Measurements in mm
AL 200 in combination with induction cooktop in 2 separate cut-outs
Side view
A: ≥ 20 mm from the Guided Air suction area to a cabinet wall
B: ≥ 60 mm for air recirculation
≥ 100 mm for air extraction with ducting in the plinth
Measurements in mm
AL 200 in combination with frameless cooktop CX 482 / Cl 282 /Cl 283 in a
single cut-out
Flush installation
Longitudinal section
A: 6.5°°5 mm
B: 2.5mm
C: Fill with silicone
Measurements in mm
AL 200 180 with AA 200 910
A: Access to the complete cover must be ensured even after installation Cover can be installed on the front or the rear from the appliance Measurements in mm
View from above
A: Front
Measurements in mm