sbs Jaz FREEZE Wireless TWS Stereo Earphones User Manual
- June 9, 2024
- sbs
Table of Contents
sbs Jaz FREEZE Wireless TWS Stereo Earphones
Overview
SPECIFICATION
- Wireless: V 5.2
- Sensivity: 95db±3db
- Working range: 10m
- Speaker driver: 10mm
- Impedance: 32Ω
- Frequency: 20Hz – 20kHz
- Battery earbuds: 35mAh
- Charging case: 300 mAh
- Standby time: 120hours
- Charge time: 1.5hours
- Working time: 5 hours
Charging
Charging the earphones
Insert the earphones into the charging case, the LEDs will light up. Once charging is complete, the LEDs will turn off.
Charging the Case
Charging via cable
Plug the Type C connector of the supplied cable into the Type C port of the
case and the other end into a USB port. The LEDs on the case will start to
flash until fully charged. Both the earphones and the cradle will charge
simultaneously.
Charging via wireless cradle
Place the case on a 5W wireless charging cradle, the LED will light up
progressively until fully charged. Both the earphones and the cradle will
charge simultaneously.
Turning the earphones on
Take the earphones out of the charging case, they will automatically turn on
and pair with each other. Or press both MLF buttons on the earphones for 5
seconds,
Turning the earphones off
Insert the earphones into the charging case, they will turn off automatically.
Or press the MLF button on one of the earphones for 5 seconds.
Device pairing
- Take the earphones out of the charging case – they will turn on and pair with each other automatically
- Turn on the Bluetooth of the device and search the list of available devices for “JAZ FREEZE”, then select it.
- After the first pairing with the device (if Bluetooth is turned on) the earphones will automatically pair whenever they are taken out of the case.
Button Function
| Command | Action | Button |
|---|---|---|
| Play/pause music | 1 touch | Left/right |
| Voice assistant | 4 seconds | Left/right |
| Previous track | 2 touches | Left |
| Next track | 2 touches | Right |
| Answering a call | 1 touch | Left/right |
| Ending a call | 1 touch | Left/right |
| Rejecting a call | 2 touches | Left/right |
| Recall the last number | 3 touches | Left/right |
If the earphones are not paired with each other, 2 earphones will appear in the Bluetooth settings and the LEDs will continue to flash: put the earphones back in the case and close the lid. By removing them, they will be paired with each other and can be connected to the device.
2022 SBS SpA, Italy
customercare@sbsmobile.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>