Xmart HL-WALL-06 Solar Lamp User Manual

June 9, 2024
xmart

Xmart HL-WALL-06 Solar Lamp

HL-WALL-06 – TECHNICAL SPECIFICATIONS

WARNING

  1. Keep the device away from fire and fire risk
  2. There are no replaceable parts inside the lamp. If disassembled warranty will be void.
  3. Do not remove battery for other use. If backup time is too short, lamp’s battery needs to be recharged under bright sunlight
  4. Clean solar panel regularly for more efficient operation and longer backup (Suggestion: At least every 6 months)
  5. Long-term storage might cause battery damage and leakage, Leakage might cause battery spontaneous combustion
  6. The operation temperature for this lamp must comply with Technical Specifications

Parts Identification

  1. Lampshade
  2. PIR
  3. Infrared Receiver
  4. Switch and Indicator
  5. Solar Panel

Special Features

  • Polycrystalline Solar Panel
  • Li-ion Rechargeable Battery
  • Configurable Operation Modes
  • Equipped With PIR Sensor
  • Material: Aluminum Alloy & PC

Installation Instructions

  • Fix the lamp to the wall with the screw
  • Solar Panel must be oriented toward sun for battery charging efficiency

IMPORTANT

  1. Use standard installation accessories
  2. If stored, charge the lamp every 3 months, to avoid battery damage
  3. If stored for more than 1 year without charging, make a charge & discharge process to assure battery is in good condition, otherwise it is not allowed to use.

Operation Instructions

Power On/Off: Press switch for 1.5 Sec, approx.

Mode Change: Press switch shortly to choose
Mode 1, Mode 2, or Mode 3.
Available Modes:
Mode 1 (Red): 60LM + PIR 2000LM x 10s
Mode 2 (Green): 120LM + PIR 2000LM x 10s
Mode 3 (Orange): 200LMx5H + 40LMx7H / PIR 2000LMx10s

Select Operation Mode according to your own requirements

Battery Power Indication:
Green: > 70%
Orange: Between 30% and 70%
Red: < 30%
Note: LED Indicator regularly shows Battery Capacity. When changing Operation Mode it shows selected mode for 5 Sec, then it returns to show Battery Capacity

T Button on Remote Control

  • Short press once for 100% bright for 10 min
  • Short press twice for 100% bright for 20 min
  • After selected time, lamp will go back to previous mode.

Dimensions

Top View
Rear View
Side View
Front View

Packing Information

Net and Gross weight information is for reference purposes only

www.xmart-ups.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals