GAGGENAU VR414115 400 Series Vario Electric Grill User Guide

GAGGENAU VR414115 400 Series Vario Electric Grill

Color Variants

• VR414115
• Stainless steel
• Width 38 cm

Included accessories

• 1 x cast pan.
• half size.
• 2 x cast iron grill.
• 1 x lava stones.
• 1 x cleaning brush.

Two zones can be operated together or separately Cast pan, half size, for simultaneous frying and grilling on two separate surfaces Open cast grill, lava stones Solid stainless steel knob, also selectable with black robust finishing, for precise control and personalisation Precision crafting of 3 mm stainless steel For surface mounting with a visible edge or for flush mounting Can be combined perfectly with other Vario appliances of the 400 series

Handling

Control knobs with illuminated ring, cooking zone and output level markings.Electronic power control in 12 output levels.

Features

Cooktop, lava stone trough and grease collecting insert from stainless steel. Two zones, each 1500 W, can be operated together as a complete surface or each half separately. Two-part cast grill.

Safety

• Safety shut-off.
• Pre-heat and residual heat indicator.

Planning notes

• Depending on the type of installation (surface-mounted or flush-mounted, with or without an appliance cover), the specific location of the cut-out and the knob positions may vary.
• If installing with the appliance cover VA 440 take into account the additional space required for the depth.
• If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided. The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads. Additional instructions for flush mounting:
• Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.
• The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
• The joint width may vary due to size tolerances of the combinations and of the worktop cut-out.
• If installing several appliances in individual cut-outs allow for a division bar of minimum 50 mm between the individual cut-outs.
• A minimum lateral clearance of at least 100 mm from adjacent heat-sensitive furniture or from the wall must be observed.
• Appliance can be snapped into the worktop from above.
• Appliance weight: approx. 27.

Characteristics

• Product name/family
  Vario/Domino barbecue grill

• Built-in / Free-standing
  Built-in

• Energy input
  Electric

• Type of control
  Electronic

• Grill grating material
  Cast iron

• Min. required niche size for installation (HxWxD)
  118 x 360 x 492

• Width of the appliance
  380

• Dimensions (HxWxD)
  118 x 380 x 520

• Dimensions of the packed product (HxWxD)
  400 x 460 x 600

• Net weight
  26.9

• Gross weight
  29.7

• Residual heat indicator
  separate

• Location of control panel
  Hob front

• Basic surface material
  Cast iron

• Color of surface
  Stainless steel, Stainless steel

• Color of frame
  Stainless steel

• Length electrical supply cord
  150

• EAN code
  4242006304966

• Electrical connection rating
  Gas connection rating

• Fuse protection
  16

• Voltage
  220-240

• Frequency
  50-60

• Included accessories
  1 x cast pan, half size, 2 x cast iron grill,
  1 x lava stones, 1 x cleaning brush

Connection

• Total connected load 3.0 KW.
• Connecting cable 1.5 m without plug.

Installations

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>