poly Voyager Free 60+ True Wireless Earbuds User Guide
- June 9, 2024
- Poly
Table of Contents
- poly Voyager Free 60+ True Wireless Earbuds
- Your earbud system
- Charge case controls
- Earbud button controls
- Earbud swipe sensor controls
- USB Bluetooth adapter
- Connect and pair
- The basics
- Answer and end calls
- More Features
- Load software
- Troubleshooting
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
poly Voyager Free 60+ True Wireless Earbuds
Your earbud system
Your earbud system easily connects to your mobile phone and computer.
The system includes:
- Wireless earbuds with wearing sensors
- USB Bluetooth adapter for connection to high-fidelity computer audio
- Charge case with touch screen controls
Charge case controls
Control features and settings using your charge case touch screen. Swipe left
and right to view navigation menus and tap icons to navigate.
Close a menu by tapping X.
Touch screen controls
Note: *Functionality varies by application. May not function with web- based apps.
Wake your charge case
Wake your screen use features or to view status. Your charge case touch screen times out when idle for 15-45 seconds in most cases.
- Wake your screen by doing one of the following:
- Tap the touch screen.
- Press the button on the back of the case.
- Open and close your charge case lid.
- Power off your screen:
- If you do nothing, your charge case touch screen times out when idle.
- To manually power off the screen, press the button on the back of the case.
Lock your charge case screen
Lock your screen to prevent changes to your touch screen features.
Lock your screen by tapping the Unlocked icon on right top corner. To unlock,
tap 3 times on Lock screen.
Earbud button controls
Click the raised button on the reverse of the earbud by pinching your earbud stem. Control using either earbud.
Note: *Functionality varies by application. May not function with web- based apps.
Earbud swipe sensor controls
The metallic touch sensor is on the top of your earbud stem. Swipe forward or
backward to adjust levels or change settings.
Control using either earbud.
Your earbud touch control features are available during certain activities.
To customize your features, see Customize your earbuds.
USB Bluetooth adapter
Your high-fidelity Bluetooth USB adapter comes pre-paired to your Poly device.
Plug it into your computer to connect to high-fidelity computer audio.
Note: Adapter’s USB connection and design may vary, but function is the
same.
Note: *Requires Microsoft Teams desktop application.
Connect and pair
Pair to mobile device
-
Remove the earbuds from the charge case to power on.
-
Chose from 2 ways to put your earbuds in pair mode.
- On your charge case touch screen, select Bluetooth “pairing.” Pair Device. You hear
- Press and hold your earbud button for 4 seconds until you hear “pairing.”
-
Activate Bluetooth® on your phone and set it to search for new devices.
- iPhone Settings > Bluetooth > On*
- Android™ Settings > Bluetooth: On > Scan for devices
Note: Menus may vary by device.
-
Select ” Poly VFree 60 Series.”
When your earbuds are successfully paired, you hear “pairing successful” and “phone connected.”
Connect to PC
Your Bluetooth USB adapter provides the best connection, softphone
functionality and acoustic sound quality through your headset. The adapter
comes pre-paired to your headset.
- Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.
- The USB adapter LED flashes and then turns solid to indicate the headset is connected to the USB adapter. If you are wearing your headset you hear “PC connected” to indicate the connection has been established. When on a call, the LED on the USB adapter flashes blue. When not on a call the LED is solid.
- Load Poly Lens Desktop App by visiting poly.com/lens. This allows you to customize your headset behavior through advanced settings and options.
Configure USB adapter for streaming media
Your high-fidelity Bluetooth USB adapter comes ready to take calls.
If you want to listen to streaming media, configure your Bluetooth USB adapter.
Windows
- To configure your Bluetooth USB adapter for streaming media in your PC, go to Start menu > Control Panel > Sound > Playback tab. Select Poly BT700 set it as the Default Device and click OK.
- To pause music when you place or receive calls, go to Start menu > Control Panel > Sound > Communications tab and select the desired parameter.
Mac
- To configure your Bluetooth USB adapter for streaming media on your Mac, go to System Preferences > Sound. On both the Input and Output tabs, select Poly BT700.
Reconnect
With Bluetooth activated and in range, click your earbud to reconnect to your
mobile device.
Choose your audio source
Using your charge case touch screen, connect to another audio device.
Your earbud system can connect to up to 2 devices including your USB Bluetooth
adapter and remembers up to 8 devices.
To switch your audio source using your charge case touch screen, go to Audio
source > Switch Device and select from your device list.
Pair BT700 USB adapter again
Your USB adapter requires Poly Lens Desktop App to pair to a Poly audio
device. Download: poly.com/lens.
- Insert the high-fidelity Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it.
- Put your Poly audio device in pair mode.
- Launch Poly Lens Desktop App and navigate to Poly BT700.
- Put your Bluetooth USB adapter into pair mode by selecting “Pair new device” on the adapter’s main page or overflow menu. Your adapter flashes red and blue.
Pairing is successful when you hear “pairing successful” and “PC connected” and the Bluetooth USB adapter LED is solid.
Note: To pair again using Plantronics Hub Desktop App, navigate to the app’s Poly BT700 general settings and select “Pair.”
Pair mode
Chose from 2 ways to put your earbuds in pair mode.
- On your charge case touch screen, select Bluetooth Pair Device. You hear “pairing.”
- Press and hold your earbud button for 4 seconds until you hear “pairing.”
Your earbuds have up to 5 hours of listening time. The charge case holds up to
10 hours of additional listening time.
To charge your earbuds, place them in the charge case. Charge the case by
plugging it into a computer or USB charging device.
For fastest charging, plug into a wall charger.
Check battery level
Check your earbud system battery level:
-
Listen to the voice prompt when you remove your earbuds from the case and put them on. It describes only your earbud battery level.
-
View earbud and charge case battery level on your charge case Navigation screen > Battery menu.
Note: Each earbud and charge case battery level are shown separately. -
View earbud and charge case battery level in Poly Lens App. Download at poly.com/lens.
Battery level| Voice prompt| Charge case battery
menu| Listen time
---|---|---|---
Battery high| “Battery high”| Green (more than half full)| 3 hours or more
Battery medium| “Battery medium”| Green (less than half full)| 1 to 3 hours
Battery low| “Battery low”| Yellow| 10 minutes to 1 hour
Battery critical| “Battery critical”| Red| Less than 10 minutes
Wireless charging
Your charge case is compatible with third-party Qi wireless chargers.
To charge wirelessly, place the earbuds in the charge case and place your case
on the wireless charger. Refer to your wireless charger user guide.
Note: Your earbuds charge only when placed in the charge case. They do
not charge if placed directly on the wireless charger.
Place earbud in your ear. Rotate down and forward for an optimal fit and sound experience.
- Try the 3 ear tips to find which size fits you comfortably while blocking external noise.
- Listen to music and select the ear tip that gives you the most bass response.
- You may prefer a different size ear tip in each ear.
Replace eartips
Changing the eartips and locking them in place is easy.
-
REMOVE:
-
Fold down the eartip’s outer cone to reveal the eartip connection to the earbud.
-
Loosen the notched eartip from the earbud with your fingernail and remove.
Alternatively, twist the eartip to remove. -
REPLACE:
-
Place the eartip on the earbud microphone column and press into place for a secure fit.
-
The eartip clicks when locked into place.
The basics
Power on/off your earbud system
Your earbuds and case power on and off automatically.
Removing your earbuds from the case automatically powers them on.
Conversely, placing your earbuds in the case automatically powers them off and
starts charging them.
- Removing your earbuds from the case automatically powers them on. Conversely, placing your earbuds in the case automatically powers them off and starts charging them.
- To wake your case, tap the screen or press the button on the back of your case. It automatically times out when idle. To manually power off the screen, press the button on the back of the screen.
Adjust the volume
Choose:
-
Adjust the Volume on your charge case touch screen. Each tap changes the volume one level.
-
When streaming media, swipe your earbud sensor forward for volume down or backward for volume up. Each swipe changes the volume by one level.
Note: Control with either earbud. -
Adjust the volume on your connected mobile device or computer.
Play or pause audio
Choose a method to pause or resume streaming audio:
- Use your charge case touch screen.
- Click your earbud button. Control with either earbud.
- With active sensors, remove both earbuds to pause streaming audio. Put on one or both earbuds to resume audio.
Note: Functionality varies by application.
Voice assistant (smartphone feature)
Siri, Google Assistant™, Cortana Press and hold the earbud button for 2
seconds to activate your smartphone’s default voice assistant. Wait for the
phone prompt to activate voice dialing, search, and other smartphone voice
controls.
Use sensors
Smart sensors respond when you put on or take off your earbuds. Customize in
Poly Lens App. Below describes default settings.
With active sensors| putting on earbuds will:|
taking off earbuds will:
---|---|---
Mobile call| answer the incoming call| mute the active call (both earbuds)
Music/media| resume music/media| pause music/media
Note: *Functionality varies by application. May not function with web- based apps.
ANC and Transparency Mode
Active Noise Canceling (ANC) reduces external noise and enhances your music
and sound quality.
Transparency Mode allows to hear your surroundings while wearing your earbuds.
Choose how you switch between ANC and Transparency mode.
- Earbuds: With your earbuds idle, swipe your earbud’s raised sensor to switch between your selected ANC mode and your selected Transparency mode.
- Charge case: Home screen > ANC/Transparency : Tap to view and select your ANC mode or Transparency mode.
- (Poly Lens App) > Settings > ANC: Tap to view and select your ANC mode or Transparency mode.
ANC and Transparency Mode settings
Choose your preferred settings for ANC and Transparency Mode.
Answer and end calls
Answer or end a call
To answer or end a call, choose:
- Press your earbud button once.
- Put on one or both earbuds to answer a call (with smart sensors active).
- On your charge case touch screen, tap the green Call icon to answer a call. Tap the red End Call icon to end a call.
- Use your connected mobile device or computer softphone.
Mute
Choose:
- During an call, select Mute on your charge case touch screen.
- During an call, swipe your earbud to mute or unmute your earbuds.
- During an call, remove both earbuds to mute your earbuds. Put on one or both earbuds to unmute
Note: Requires active smart sensors.
Answer a second call
First, click the right earbud to end current call, then click the right earbud
again to answer new call.
Redial last outgoing call (smartphone feature)
Double-click your earbud button to redial the last outgoing mobile call.
Note: Control with either earbud.
Answer calls from a second device
It’s easy to answer calls from two devices.
When on a call, you hear a ringtone notification of the incoming call from the
second paired device.
To answer a second call from the other device, click your earbud button to end
the current call and click the button again to answer the new call. If you
choose to not answer the second call, it will go to voicemail.
Launch Microsoft Teams (Teams model only)
Tap your headset Teams button to quickly open and use the Microsoft Teams
desktop app.
Note: Your headset’s Call button is also the Microsoft Teams button.
- When not on a call, tap your Teams button to view Microsoft Teams app on your computer.
- When your connected USB adapter LED pulses purple, tap your Teams button to view Teams notifications.
Note: Teams model and Teams desktop application required. Teams mobile application is not supported.
More Features
Customize your earbuds
Customize your earbud swipe sensor settings in Poly Lens App.
Download the app: poly.com/lens.
Customize which swipe sensor settings are available during certain activities,
such as during a call or while streaming media.
Configure in Poly Lens App, go to Settings > Custom swipe sensor.
add swipe image variable
Adjust voice prompt volume
Adjust the volume of voice alerts and prompts in Poly Lens App Settings >
Volume??. Download the app: __
DeepSleep mode
If you leave your earbuds powered on but out of range of your paired device,
they conserve power by entering Deep Sleep mode after 90 minutes.
To exit Deep Sleep mode, power on each earbud.
Connect new earbud
If you lose one of your earbuds and order a replacement, connecting your new
earbud to your existing system is easy.
- To connect to your other earbud and case, place your new earbud in the charge case along with your existing earbud.
- Use your earbuds as normal.
Bluetooth transmitter
Stream audio wirelessly from an in-flight entertainment system or other audio
source with 3.5 mm port.
-
Connect the supplied adapter cable from your charge case USB-C port to the audio source’s 3.5 mm port.
-
On your charge case menu, select Bluetooth > Bluetooth transmitter > Begin streaming.
Your earbuds are now connected to the audio source with your charge case working as your Bluetooth transmitter. -
Stream audio from the connected audio source.
-
To disconnect, go to your charge case menu and select Bluetooth > Bluetooth transmitter > Stop streaming and disconnect the adapter cable.
Load software
Download Poly Lens App to get the most out of your device. Some softphones require the installation of Poly software to enable device call control (answer/end and mute) functionality. Download: poly.com/lens.
- Enable features
- Change settings
- Configure call control for softphones
- Update device firmware
- Manage notifications and alerts
- Schedule health and wellness reminders
Update your Poly device
Keep your firmware and software up-to-date to improve performance and add new
features to your Poly device.
Update your device using Poly Lens App. Download at
poly.com/lens.
Troubleshooting
NEED MORE HELP?
poly.com/support
Manufacturer:
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
Plantronics B.V.
Scorpius 171
2132 LR Hoofddorp
Netherlands
Plantronics Ltd.
Building 4, Foundation Park
Cannon Lane, Part 1st Floor
Maidenhead, SL6 3UD
United Kingdom
© 2022 Poly. Bluetooth is a registered trademark of Bluetooth SIG, Inc.
All trademarks are the property of their respective owners.
Manufactured by Plantronics, Inc.
Model ID: Earbuds F60T (F60TR, F60TL), adapter BT700/BT700C, charge case
CBF60+. 221621-06 10.22
References
- Poly | Video & Voice Collaboration Solutions | HP® Official Site
- Poly Lens Device Management App | HP® United Kingdom
- poly.com/software
- poly.com/support