ZTE EW2201 Watch Live2 Smartwatch User Manual

June 9, 2024
ZTE

ZTE EW2201 Watch Live2 Smartwatch

Enter pairing mode

  • The watch automatically turns on while charging.
  • Press and hold the button on the side to power on.

Get the “Z Sports” app

Please download and install the “Z Sports” APP to bind your device and use more services

Set up and pair

  • Please download and install the “Z Sports” APP to bind your device and use more services.

  • Please scan the QR code on the right or the QR code on the watch screen.

  • Download and install the “Z Sports” APP.

  • Open the “Z Sports” APP and follow the instructions on the screen.

  • When adding a device, a pop-up box about whether to accept the binding will pop up on the watch side, click “√” to complete the binding with the APP.

  • During the binding process, please make sure that the phone’s Bluetooth is turned on to ensure that the watch and the phone are connected normally.

  • If during the process of adding a device, multiple same products around are
    displayed, please click “Scan to Pair” to scan the QR code on the watch screen to bind.

  • If the device cannot be found during the process of binding the device, or the device cannot be connected during use, please try to select “Restore Factory” in the watch system operation interface, and then re-bind the device

Button actions

Short press

  • Wake the watch screen
  • Return to the home screen
  • Lock screen
  • Pause or resume workout

On home screen

  • Press and hold to change the watch face
  • Swipe down to enter shortcut menu
  • Swipe right to see Switch card
  • Swipe up to enter app list
  • Swipe left to see Switch card

Charger

Please connect charging cable to the watch as follows

Use a regular USB charger with output voltage of 5.0V and output current of 200mA or above to connect your charging cable to a power outlet or charging device

Changing the wristband

Slide the spring pin and hold it while pulling away from the watch to remove the current wristband. To attach a new band, slide the spring pin across and slot the new band. When both sides of the band are positioned correctly, release the spring pin

FAQ

Issue description Possible cause Solution

Incorrect step count

| Abnormal waggling or vibration of device| Wear the watch properly to avoid abnormal vibration
Walked less than 15 steps| Walk more than 15 steps continuously
Sliding or walking

in slippers

| Walk with normal posture/ wear

something other than slippers

No display

|

Low battery

| Connect to charger to charge

the watch

Watch failed to sync data to the App

| The connected phone’s

Bluetooth is off

| Turn on the connected phone’s

Bluetooth

App is shut down or has crashed| Restart the “Z Sports” App
Out of Bluetooth signal range| Make sure your watch is in close

proximity to the connected phone

Specifications

Product Name ZTE WATCH Live2
Product Model EW2201
Storage Environment Temperature: -20℃ to 60℃

RelativeHumidity:≤90%RH

Working

Temperature

| 0℃ to 45℃
Frequency Range| 2402MHz-2480MHz
Bluetooth

Transmitting Power

|

< 1 dBm

Battery Capacity| 230mAh
Charging duration| About 2 hours

Features

  • Bluetooth BLE5.1
  • Full-screen touch
  • 1.69″ TFT display 240*280 pixel
  • Daily Tracking : Active/ Steps /Calories
  • SpO2 Blood Oxygen monitoring
  • Breathing training
  •  Sleep monitoring report
  • Call notification
  • Find your phone
  • Music control
  • Camera control

Warning

Matters needing attention
The electronic equipment contained in the product, if improperly handled or disposed of, may damage the environment or cause harm:

  • Do not open the shell of the watch.
  • Do not replace the built-in battery by yourself.
  • Do not use corrosive cleaner to clean the product.
  • Do not charge when the product is wet.
  • If the product is not completely dry, do not charge.
  • Do not expose the product to extended periods of direct sunlight.
  • Do not use the product in a sauna or steam room.
  • Do not expose the product to extremely high or low temperatures.
  • If the screen or shell is damaged, do not use the product.
  • Do not put the product in the dishwasher, washing machine or dryer.
  • Do not expose the product to fire, the battery may explode.
  • While charging, please make sure the charging cable is correctly connected to the watch and charger, and that the charger is properly connected to the power outlet.
  • If the temperature of the product rises sharply during charging, please stop charging and contact our support team for assistance.
  • Some users may experience skin irritation due to wearing the product for too long. If you experience redness, swelling, itching, or other negative physical side effects, please consult your doctor.
  • Do not interact with the screen while driving, distracted or in otherwise dangerous situations.
  • This is not a toy. Do not let children or pets play with the product. Small parts of the product may cause a choking hazard.
  • Product functions may be affected by external factors such as interference, and the data is for reference only.
  • The product has a heart rate recording function. Wearing the device for a long time may cause skin discomfort or risk of certain diseases for some users. If you have any of the following symptoms, please stop using the device and consult your doctor:
    • Epilepsy or sensitivity to light.
    • Poor blood circulation or excess bruising; heart disease or other diseases.
    • You are yaking any medicine that may make you sensitive to light.

Certification

Medical Disclaimer
Warning: This Smart Watch EW2201 is not a medical device. The Smart Watch EW2201 and its related Apps may not be used to diagnose, treat, or prevent any disease or medical condition. Before performing any exercise, sleep, or nutritional changes, be sure to seek the advice of qualified medical professionals, otherwise serious injury or death may result.

EU Declaration of Conformity
Hereby, ZTE Corporation declares that this radio equipment type ZTE WATCH Live2(EW2201) is in compliance with Directive: 2014 / 53 / EU. The full text of the EU declaration of conformity is available at the following Internet address: https://certification.ztedevices.com

Disposal of your old Appliance

  1. When the wheelie bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU.
  2. All electrical and electronic products should be disposed of separately from normal household waste via designated collection points provided by government or local authorities.
  3. The correct disposal of electrical and electronic products will help protect the environment and human health

For this prodc’ts recyling information based on WEEE directive,please send an e-mail to weee@zte.com.cn

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,and
  2. This device must accept any interference received, including interference that may cause undesired operation

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Battery warning
The built-in lithium battery of the product is forbidden to be disassembled, impacted, extruded or put into fire. The battery under the very low air pressure may result in explosion or flammable liquid or gas leakage. Avoid the battery in a high-temperature environment or being exposed to strong sunlight to avert explosion. Don’t use the battery continuously in case of serious ballooning. The battery shall be handled pursuant to the local regulations and shall not be disposed as household garbage. Don’t try to repair, remove or refit the battery. The explosion may happen if the battery is replaced by the one subject to incorrect model. Don’t compress or puncture the battery with hard object. The battery leakage, overheating or outbreak of a fire may occur if the battery is destroyed.

Warranty Card

  1. Warranty Period: one year from purchase date, or base on local law requirement. You can also go to the shopping Web page or contact your seller to know details about warranty policy.
  2. We kindly remind you that the following situations are not covered in our warranty policy. Please use the product in a safe and reasonable manner.
  3. Damage to the machine caused by external forces
  4. Wear and tear caused by daily use
  5. Malfunction caused because water or other liquid enters the machine
  6. Network signal problem
  7. Malfunction caused by product connection, or use of accessories that are not provided by the manufacturer or incompatible with the product.
  8. Malfunction caused because the user dissembles the machine by himself
  9. Malfunction caused by other force majeure
  10. In case of any technical problem or suggestion, send an Email to mobile@zte.com.cn for support.
  11. Instructions:
  12. Read the user manual before using the product.
  13. Do not throw the battery or product into a fire or liquid.
  14. Power off the product in an inflammable and explosive environment.
  15. Keep the battery away from metal, oily and corrosive articles.
  16. Use the original or specified battery and charger.6) Do not dissemble the machine by yourself
  17. LIMITED WARRANTY
    TO THE EXTENT PERMITTED BY APPLICABLE LAW, THIS LIMITED WARRANTY IS YOUR SOLE AND EXCLUSIVE REMEDY AGAINST ZTE AND ZTE’S SOLE AND EXCLUSIVE LIABILITY IN RESPECT OF DEFECTS IN PRODUCT. HOWEVER, THIS LIMITED WARRANTY SHALL NOT EXCLUDE NOR LIMIT ANY OF YOUR LEGAL (STATUTORY) RIGHTS UNDER THE APPLICABLE NATIONAL LAWS. TO THE EXTENT PERMITTED BY APPLICABLE LAW ZTE DOES NOT ASSUME ANY LIABILITY FOR LOSS OF OR DAMAGE TO OR CORRUPTION OF DATA, FOR ANY LOSS OF PROFIT, LOSS OF USE OF PRODUCTS OR FUNCTIONALITY, LOSS OF BUSINESS, LOSS OF REVENUES OR LOSS OF ANTICIPATED PROFIT, INCREASED COSTS OR EXPENSES OR FOR ANY INDIRECT, OR SPECIAL OR CONSEQUENTIAL LOSS OR DAMAGE. TO THE EXTENT PERMITTED BY APPLICABLE LAW, ZTE’S LIABILITY SHALL BE LIMITED TO THE PURCHASE VALUE OF THE PRODUCT. THE ABOVE LIMITATIONS SHALL NOT APPLY TO DEATH OR PERSONAL INJURY CAUSED BY DEFECT OF PRODUCT IN MATERIAL, DESIGN AND WORKMANSHIP.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals