LOL SURPRISE 577256 HD Studio Camera User Guide
- June 8, 2024
- LOL SURPRISE
Table of Contents
577256 HD Studio Camera
L.O.L. Surprise!TM HD Studio Camera
Show off for the camera! Use the HD Camera to take photos and selfies. Film
fun videos with the green screen and add one of 40+ special effects. Make
comic book pages and create stop motion videos. Change your voice and add
sounds to videos. Play exciting games.
L.O.L. SURPRISE!TM HD STUDIO CAMERA
WRIST STRAP CAMERA LENS
KEYPAD HOME ENTER PLAY
OPTIONS
DELETE
SHUTTER BUTTON
DIRECTIONAL BUTTONS
CONTENTS
SELFIE STICK / TRIPOD
1. 2.4″ Color LCD Screen HD Camera 2. Tripod/Selfie Stick 3. Green Screen Fabric 4. Wrist Strap 5. Micro-USB Cable
Only one L.O.L. Surprise!TM HD Studio Camera included. Multiple shown for reference only.
To turn on the device, press and hold the home button for about 3 seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The plastic
cover over the camera surface is packaging material included for protective
purposes and should be removed prior to use.
2
MICRO-USB
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your computer to
transfer photos and videos, charge the device and update the firmware. 1. Open
the cover over the Micro-USB port on L.O.L. Surprise!TM HD Studio 1. Camera.
2. Insert the Micro-USB side of the cable into the port. 3. Insert the large
USB end into a USB port on your computer. NOTE: The camera will not be
accessible when the Micro-USB is plugged in.
BATTERY CHARGING
Prior to use, it is recommended that you fully charge L.O.L. Surprise!TM HD
Studio Camera for optimal performance. NOTE: The device should be OFF prior to
charging. To power OFF, hold the home button for about 5 seconds, until a
sound plays and the device shuts off. 1. Insert the larger end of the Micro-
USB cable into a USB port on your
computer. 2. Lift open the cover over the Micro-USB port on L.O.L. Surprise!TM
HD
Studio Camera and insert the Micro-USB cable into the port. 3. A battery
symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over charge the
battery. 4. You can now turn on the device and begin playing.
FIRMWARE UPDATE
NOTE: The device has to have a minimum of 20% battery power when updating the
firmware. It is recommended to insert a microSD card (not included) with more
than 50MB free space to begin the update.
Before beginning, it is important to check for any available firmware updates
so that the L.O.L. Surprise!TM HD Studio Camera is operating optimally. To
update the firmware on your device: 1. On your computer, visit WWW.MGAE.COM
/LOLSURPRISE-CAMERA
and download the Firmware Installer. 2. Turn off the camera. To turn off the
device, press and hold the home
button on the front of the device for about 5 seconds until a sound plays and
the screen turns off. 3. Follow the steps on page 4 to connect the Micro-USB
Cable to the camera and your computer. 4. On the Firmware Installer, click on
Firmware Update. A progress bar will appear on your computer’s screen, or, if
your watch is up-to-date, it will say “Firmware is up to date.” If it is up-
to-date, properly eject the device from your computer. 5. Once the progress
bar on your computer shows it is complete, properly eject the device from your
computer. Then, remove the Micro-USB Cable. 6. Turn on the camera. To turn on
the device, press and hold the home button for about 5 seconds. A firmware
update screen will be displayed on the device. Press the check mark and wait
for the progress bar to finish loading to complete the firmware update. NOTE:
After the camera cycles back on, it is recommended you turn the device off and
back on again to confirm the update was successful.
Open the port cover on the side of L.O.L. Surprise!TM HD Studio Camera and plug the Micro-USB end of the cable into the port. Plug the charging cable into the USB port on your computer.
NOTE:
· See page 23 for more BATTERY INFORMATION.
SYSTEM REQUIREMENTS
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows® 8,
and Windows® 10 Operating System or a Macintosh Computer with macOS X
version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
4
6
SPECIFICATIONS
Supported Languages
English, Spanish, French, Dutch, German, Italian, Polish
Connectivity
Wireless Connectivity: BLE connection L.O.L. Surprise!TM Smartwatch 2.0 Micro- USB Cable: 2.0 (Included for connecting to computer)
Battery
Lithium Polymer battery (non-replaceable)
Battery Life
Up to 2 hours
Optimum Operating and Charging Temperature
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display
2.4″ Color LCD
Focus Range
1.5′ infinity
Internal Memory MicroSD card (not included):
256MB (shared with system data, the actual memory for user will be less) Up to 128GB, Class 10 or above is recommended
File Format
Photo (JPEG), Video (MP4)
Memory Storage
Storage
Resolution
Internal Memory
32 GB microSD Card (Not Included)
PHOTOS VIDEOS
2.0 MP 5.0 MP 720p 1080p
410 94 4 min 10 sec 2 min
160,000 45,700 1,060 min 640 min
Resolution
Pixels
Low Resolution
PHOTOS
1600 x 1200 (2.0 MP)
VIDEOS
–
–
Mid Resolution
–
1280 x 720 (720p)
High Resolution
2560 x 1920 (5.0 MP)
1920 x 1080
(1080p)
3
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the slot
above the USB port. (Micro-SD memory card is not included.) See page 3 for
more information on the memory storage. It is recommended to use a 32GB
microSD card with the camera.
USING THE CAMERA
The camera can be used two ways. To use it as a selfie camera, flip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing Camera Position
Selfie Camera Position
Open the port cover on the side of L.O.L. Surprise!TM HD Studio Camera and
insert a microSD memory card.
NOTE: When adding a microSD card, the camera will automatically restart.
STARTING UP L.O.L. Surprise!TM HD Studio Camera
To turn on the device, press and hold the home button on the front of the
device for about 5 seconds until the screen turns on and a sound plays. When
you first start the camera, ensure the firmware is up-to-date. Make sure the
device is fully charged (see page 4). To begin, you’ll be prompted to set the
language, date format, time, and name of the device. For more information on
how to set these features, see SETTINGS on pages 19-20.
WAKING UP L.O.L. Surprise!TM HD Studio Camera
After about a minute of inactivity, the camera will turn off. Press the home
button once to wake up the device.
NOTE:
For your security, the camera and microphone on your device will be disabled
when connecting to a computer with the Micro-USB Cable, as the device must be
off. Properly eject the device from your computer, unplug the Micro-USB cable,
and turn the device on before using these features.
TRANSFERRING FILES FROM THE CAMERA
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns off.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called LOLSURPRISE CAMERA.
Click on this drive to transfer files from the device to your computer using
the folders called PHOTOS and VIDEOS. Copy and paste the files in these
folders to the desired location on your computer. TIP: Photo and video files
will not be deleted from L.O.L. Surprise!TM HD Studio Camera until you
manually delete them on the device by pressing the trash can button in the
photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
file types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while files are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
5
disconnect the cable and the camera.
7
USING THE SELFIE STICK/TRIPOD
L.O.L. Surprise!TM HD Studio Camera can be used one of three ways: handheld
device, selfie stick or as a tripod. Follow the instructions below to use with
the selfie stick or tripod.
MENU
Use the on-screen icons to select from a variety of special effects, features,
and games. To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
VIDEO
CAMERA
STOP MOTION
AUDIO RECORD
STICKERS
GREEN SCREEN EDITOR
GAMES
COMICS
To attach the selfie stick/tripod, twist the screw on top of the stick
into the bottom of the camera. Keep turning until it feels secure.
To adjust the camera, loosen the knob and move the camera
forward or backward. Turn the knob to tighten and secure.
To convert the selfie stick into the tripod, pull the legs out.
Push them back in to revert
8 back to the selfie stick.
GALLERY
VIDEO MENU
MASKS
SETTINGS
REMEMBER: For your security, the camera and microphone on your device will be disabled when connecting to a computer with the Micro-USB Cable, as the device must be off. Properly eject the device from your computer, unplug the Micro- USB cable, and turn the device on before using these features.
12:45 00:00
12:45
Filming Videos
· To access the video camera, scroll through the Menu with the directional
buttons and then press Enter button to select the video icon. · To record
selfies or Point of View (P.O.V.) videos, press the Shutter button. Press it
again to stop recording. · Press the up or down button to trigger the camera
and take a picture. · To activate the timer, press the Options button. Use the
left or right buttons to select timer time.
00:00
Video Special Effects
· Before you begin recording, press the
left or right directional buttons to scroll
through all the different options.
· Once the desired effect is on the screen,
begin recording.
10
KEYPAD BUTTONS
Home Button Press and hold the home button on the keypad of the camera for
about 3 seconds to turn it on. To turn off the camera, press and hold the
button again for 3 seconds. In normal play, pressing the home button will
return to the previous screen. Continuously pressing it will go back to the
main menu.
Directional Buttons Press the left, right, up or down arrows to navigate
through the screen’s icons.
Delete Button Press to delete pictures or videos. After pressing, two icons
will appear. A check mark and an X icon. Check mark is to delete and the X
icon will cancel the request to delete.
Options Button If options icon is visible in the lower left corner, press the
Options button to discover available options.
Enter Button Press the Enter button to select the mode.
Play Button Press to play videos while in the Gallery.
Shutter Button Shutter button can be used to take pictures in camera mode,
record videos in video mode, or record audio in audio record mode.
HOME ENTER PLAY
HAND GESTURE
Activate the video recording with a simple hand gesture. Make a peace sign
with your fingers in front of the camera. Then, bend the two fingers up and
down like a quotation gesture. The camera will begin recording. To stop
recording, repeat the gesture.
CAMERA MENU
12:45
Taking Pictures
· To access the camera, scroll through the Menu
with the directional buttons and then press
Shutter button to select the camera icon.
· To take selfies or P.O.V. pictures, press the
Shutter button.
· Press the up or down button to zoom in and out
on the screen.
· To activate the timer, press the Options button.
Use the left or right buttons to select timer
time.
12:45
Photo Special Effects
· Before you take a picture, press the
left or right directional buttons to scroll
through all the different options.
· Once the desired effect is on the screen,
take a picture.
OPTIONS
DELETE
DIRECTIONAL
BUTTONS
9
11
STOP MOTION MENU
Creating Stop Motion Videos
12:45
· To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press Enter button to
select the stop motion icon.
· Capture frames by pressing the Shutter
button.
· Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
· To play stop motion video, press the Options button. Then move the directional
buttons to the play icon and press the Enter button to select it.
· To save the video, press the Options button. Then move the directional buttons
to the save icon and press the Enter button to select it.
12:45
Play
Save
AUDIO RECORD MENU
12:45
00:1 5.37
00 1
Play
Save
Recording Audio
· Press the Shutter button to begin recording. Press it again to stop
recording. · To delete the audio, press the Delete button and then the check
mark to confirm the action.
Play/Save Audio:
· To play audio, move the directional buttons to the play icon and press the
Enter button to select it. · To save audio, move the directional buttons to
the save icon and press the Enter button to select it.
12
GREEN SCREEN MENU
Create videos or take pictures with the green screen! To access the green
screen, scroll through the Menu with the directional buttons and press the
Enter button to select the green screen icon. Then, scroll between the video
or camera icons with the directional buttons and press the Enter button to
select it.
12:45
When filming videos or taking pictures with the green screen, extend the green screen fabric and stand in front of it.
12:45 00:00
Creating Videos
· Scroll through 40+ background options and press the Enter button to select
it. · When prompted to use the green screen background, press the Enter
button. · To record selfies or P.O.V. videos, press the Enter button. Press it
again to stop recording. · Press the up or down button to trigger the camera
and take a picture. · To activate the timer, press the Options button. Use the
left or right buttons to select timer time.
12:45
Taking Pictures
· Scroll through 40+ background options
and press the Enter button to select it.
· When prompted to use the green screen
background, press the Enter button.
· To take selfies or P.O.V. pictures, press the
Shutter button.
· Press the up or down button to zoom in
and out on the screen.
· To activate the timer, press the Options
button. Use the left or right buttons to
select timer time.
14
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
· Press the Options button. The filters will appear on the bottom of the
screen.
· Use the directional buttons and press the Enter button to select it.
12:45
Filters
Choose between five different sound filters.
00:00.00
Normal
Slow
Robot
Fast
Squeaky
STICKERS MENU
12:45
Creating Stickers
Create unique stickers with objects around
your room!
· To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
· Set up the included green screen fabric
behind an object.
· When prompted to use the green screen
background, press the Shutter button.
· Press the Shutter button to take the picture.
· Press the up or down button to zoom in and
out on the screen.
· To activate the timer, press the Options
button. Use the left or right buttons to select
timer time.
Save/Delete Stickers
· To save stickers, press the Options button. Then move the directional buttons to
the save icon and press Enter to select it.
· To delete the sticker, press the Options button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
12:45
001
Save
Delete
13
EDITOR MENU
12:45
Editing Videos
· To access the editor, scroll through the Menu
with the directional buttons and press the
Enter button to select the editor icon.
· Choose a video to edit by scrolling through
the videos and pressing the Enter button to
select it.
· After choosing the video, scroll through the
editing options and choose one.
· After editing the video, choose the play
button to play the edited video.
· Choose the save icon to save the edited video.
Sound Trim Effects Title Play Save
TRIM VIDEO: · Press the Play button and start the video. · Move the left or right buttons to move through the frames that you want to trim. · Press the Enter button to trim.
ADD SOUND EFFECTS: Add movie opening music, background music or your own
recorded audio. · Select one of the three sound icons · Scroll through the
different sound options and select the desired sound.
Movie Openings: The movie opening audio will start at the beginning of the
video. It will stop as soon as the first frame ends.
Background Music: The music will continue in a loop until the video ends.
Recorded Audio: The audio will play until it is over or the video ends.
ADD TITLE: · When the keyboard appears, press the directional and Enter button to type a title. · Press the “enter” to save the title. · The title will appear at the beginning of the video.
My New Video
My New Video
15
GAMES MENU
All games have three level options, where 1 is the easiest and 3 is the hardest level.
12:45
Pair It Up! :
· Match the images before the time runs
out.
· Use the Directional buttons to scroll
through the cards.
· Flip the card over by pressing the Enter
button.
· If they match, you will earn a point.
· If they don’t match, they will flip back
over and you will have to try again.
12:45
Glamour Puzzle:
The device will choose one of three L.O.L
Surprise!TM scenes.
· Press the Directional buttons to scroll
through the tiles.
· To move a tile, press the Enter button.
The tile can only move into the empty
square.
· Continue to move the tiles until the
picture is complete. The empty square
should be on the lower right corner if
all the pieces are in order.
· To win, make sure the photo is
complete before the time runs out.
· There are three levels. After completing
3 rounds, the game will move to the
next level. Each level will have shorter
time.
MASK MODE MENU
The masks will track the person’s face on the screen and move with the person. Depending on the mask, it will appear on a certain part of your face. For example, if you choose a hat mask, it will appear on the head of the person. If you choose glasses, it will appear on the eyes of the person.
12:45
Masks Effect
· To access the Mask Mode menu, scroll through
the menu with the directional buttons and then
press Enter button to select the mask mode icon.
· Before you take a picture, press the left or right
directional buttons to scroll through all the
different options.
· Press the Shutter button to take the picture.
· To zoom in or out, press the up or down buttons.
· To activate the timer, press the Options button.
Use the left or right buttons to select timer time.
IMPORTANT NOTES: · Face recognition will vary depending on the environment. Make sure to stand 3’4″ (1m) in front of the camera and the camera can clearly see the face. · Make sure the face is always in a front face position. · The camera will only be able to detect 3 faces.
GALLERY MENU
All videos, pictures, recorded audio and stickers created with the camera will
be saved to the gallery. To access the Gallery Menu, scroll through the menu
with the directional buttons and then press the Enter button to select the
gallery icon. · While in the video gallery, use the directional button and
Enter button to select and view the videos. · Use the home button to return to
the gallery’s main page and scroll left or right to view the saved items in
the camera, recorded audio and sticker galleries. · To erase anything in the
gallery, press the Delete button and then the check mark to confirm the
action.
GALLERIES
Videos
Pictures Stop Motion
Stickers
12:45
16
18
SETTINGS MENU CONTINUED
Resolution, Remote Control, Memory, Firmware Version, Language
Resolution
Camera Setting
Use the up and down buttons to change the resolution of the camera Use the
right button to move to the video’s setting.
Video Setting
Use the up and down buttons to change the resolution of the video. Use the left button to move to the camera’s setting.
STORAGE & UPDATES: To cycle through each setting, use the directional buttons to scroll and the Enter button to select it. Make the appropriate changes and press the Home button to return to the sub-menu.
LOL_SURPRISE
E
L.O.L. Surprise!TM Smartwatch 2.0 Control the camera using a L.O.L. Surprise!TM Smartwatch 2.0 (sold separately) · When prompted on the smartwatch, connect it to the camera. · Use the smartwatch as a remote control to control the camera. · Camera will only work with L.O.L. Surprise!TM Smartwatch 2.0.
Factory Reset
Memory/Factory Reset · The top bar will show the device’s memory space. · To reset the device to the factory settings, press the down button and then the Enter button. Press the X or check mark to confirm the action. NOTE: Resetting will delete anything saved on the device.
V0.0.1
Firmware Version: · Check that L.O.L. Surprise!TM HD
Studio Camera is up-to-date with the latest available firmware. · The screen
will show you which version you have. · See page 6 for more information on
Firmware updates.
NOTE: You will also see this screen on your
first start up after updating the firmware.
Language Selection: · Use the up and down buttons to change the language.
English Spanish French
Dutch German Italian Polish NOTE: L.O.L. Surprise!TM HD Studio
20 Camera does not speak any language.
WARNING
This toy produces flashes that may trigger epilepsy in sensitized individuals.
A very small percentage of people, due to an existing condition, may
experience epileptic seizures or momentary loss of consciousness when viewing
certain light patterns or flashing lights. While this product does not
contribute any additional risks, it is recommended that parental supervision
is enforced during play. If you experience any dizziness or altered vision,
disorientation or convulsions, IMMEDIATELY discontinue use and consult a
physician. Focus on screens in close proximity for an extended amount of time
may cause fatigue or discomfort. For every one hour of play, take a 15 minute
break, or take breaks more frequently as needed.
CARE AND MAINTENANCE
· Always keep the port cover closed during use to prevent water or debris from
entering the device. Only open the port cover to connect the device to your
computer. · Keep the device clean by wiping it off with a slightly damp cloth
and drying it thoroughly. Do not place the device under running water or use
harsh chemicals or abrasive materials to clean. · Wipe the accessories with a
damp cloth regularly to keep them clean. Always air dry; do not subject to
heat. · Keep the device and accessories out of direct sunlight for long
periods of time. Do not expose the device or accessories to direct heat
sources. · Do not drop the device on a hard surface to prevent damage. · Keep
the camera lens clean. If pictures are blurry, it could be because dust or
dirt is covering the camera lens. Wipe clean with a dry, soft cloth and/or
blow gently on the lens to remove any debris. · If you do not plan to use the
device for an extended period, it is recommended that you turn the device off.
Regularly charge the battery when not in use to ensure the battery accepts a
charge. See BATTERY LIFE AND MAINTENANCE on page 23.
SPLASHPROOF
While your device can withstand splashes from washing your hands or dancing in
the rain, it is not recommended to submerge the device in water. To prevent
water damage: 1. Always ensure the cover over the Micro-USB port is completely
closed to
prevent water from getting inside the camera. 2. Do not place the device under
running water. 3. Do not submerge in water or use while swimming.
RESTARTING CAMERA
To restart the camera, move the switch under the device to the OFF position
and then back to the ON position.
22
BATTERY DISPOSAL
`Let’s care for the environment!’ The wheelie bin symbol indicates that the
product must not be disposed of with other household waste. Please use
designated collection points or recycling facilities when disposing of the
item. Do not treat old batteries as household waste. Take them to a designated
recycling facility.
BATTERY REMOVAL INSTRUCTIONS This camera contains a battery that is non-
replaceable. Do not attempt to open the device unless you are permanently
disposing the device. Opening the device for any other reason could void the
warranty. Battery removal is permanent, and the device will no longer work
after removing the battery.
CAUTION: An ADULT must remove the battery for proper disposal. Always wear
protective safety goggles in case of battery leakage.
1
2
Remove the bottom case.
3
Remove the screws’ plugs.
4
Use a small Phillip’s screwdriver (not included) to remove the four screws on the front of the camera.
Use scissors to carefully cut the black and red wires ONE AT A TIME. Cover the wires/terminals with electrical tape and properly dispose of the battery.
24
HD STUDIO CAMERA
For more information including the latest instructions, visit: WWW.MGAE.COM
/LOLSURPRISE-CAMERA
USER GUIDE
Illustrations are for reference only.
26
Styles may vary from actual contents.
EN
6+
577256, 577256EUC
COMICS MENU
12:45 LAYOUT OPTIONS:
Create Comic Books
· To access the comic book layouts, scroll through the Menu with the
directional buttons and press the Enter button to select the comics icon. ·
Scroll and choose from the layout options. · After choosing the layout, choose
a panel and then choose a picture to place in that panel. · Add speech bubbles
and graphics to the images. · Choose the save icon to save the comic book.
1
2
3
4
ADD SPEECH BUBBLES: · Use the directional buttons to choose a speech bubble. ·
Press the Enter button to select the speech bubble. · The speech bubble will
appear in the photo panel. · Move the speech bubble to the desired location
with the directional buttons. Then, press the check mark to place.
12:45
ADD GRAPHICS · Use the directional buttons to choose a graphic. · Press the
Enter button to select the graphic. · The graphic will appear in the photo
panel. · Move the graphic to the desired location with the directional
buttons. Then, press the check mark to place.
12:45
17
SETTINGS MENU
Brightness, Volume, Date, Time
To cycle through each setting, use the directional buttons to scroll and the
Enter button to select it. Make the appropriate changes and press the Home
button to return to the Settings Menu.
Brightness Setting
Use the up and down buttons to change the brightness of the screen. Use the
right button to move to the volume.
Volume Setting
Use the up and down buttons to change the device’s volume level. Use the left
button to move to the brightness.
Date Selection/Date Format:
· To change the date, use the left or right buttons cycle through the month,
day, year. There will be arrows above and below the selected sections.
· Use the up or down button to change the numbers.
· To change the date format, use the left button until the arrows are over the
date format section.
· Use the up or down button to change the date format.
· Press the Home button to set it. After pressing the Home button, it will
return to the Settings Menu.
Time Selection:
· Use the left or right buttons to cycle through the hour, minutes and AM/PM.
Arrows above and below will appear in the selected sections.
· Use the up or down button to set the time.
· Use the left or right buttons to select the time display. Then use the up
and down to choose between 12 or 24 hour cycle.
· Press the Enter button to set it. After pressing the Enter button, it will
return to the Settings Menu.
NOTE: L.O.L. Surprise!TM HD Studio Camera will not automatically change for
Daylight Savings Time.
19
TROUBLESHOOTING
The camera has stopped working.
1. Turn the power OFF by pressing and holding the home button until the
device turns off.
2. Turn the device back ON by pressing and holding the home button until the
device turns on.
NOTE: if the device still does not work, charge the battery (see page 4) and
follow the steps above.
The image or video taken is not clear.
1. Ensure the lighting in the area you are shooting is sufficient.
2. Check that the camera lens is clean. If dirty, wipe with a dry, soft cloth
and blow on it to remove debris. See CARE AND MAINTENANCE on page 22.
Cannot connect the device to a computer.
Wireless connectivity is not working properly.
The device is not charging.
1. Ensure there is a good connection between the device and the computer via
the Micro-USB Cable. See MICRO-USB PORT on page 4 and other supporting
sections for more information.
2. If the cable is damaged, contact consumer service. Do not attempt to use
the cable if it is damaged.
1. Stay within close proximity (about 50 ft./15m with nothing in the way) of
a L.O.L. Surprise!TM Smartwatch 2.0 if connecting to a smartwatch.
2. The device must have a sufficient amount of battery power to connect
wirelessly. Recharge the device using the included Micro-USB cable.
1. Only use the included Micro-USB cable to charge the device.
2. It is recommended you only charge the device using a USB port on your
computer.
3. Make sure to charge the device regularly, even if it is not in use. A
battery that has not been charged in a long time may no longer accept a
charge.
Camera not turning on.
1. Press and hold the home button for three seconds. 2. Move the switch under
the device to the OFF
position and then back to the ON position. 3. Make sure it is fully charged.
Camera is frozen.
Move the switch under the device to the OFF position and then back to the ON position.
21
LiPo BATTERY SAFE USAGE
This device is equipped with a Lithium Polymer (LiPo) rechargeable battery.
Please pay attention to the following cautions for safety use: · Before
recharging, allow the battery to cool for at least 10 minutes after use. · Do
not dispose of the battery in fire or extreme heat. · Do not use or leave the
battery near a heat source such as a fire or a heater. · Do not strike or
throw the battery against hard surfaces. · Do not immerse the battery in
water. · Keep the battery in a cool, dry place. · When recharging, only use
the Micro-USB Cable specifically included for that
purpose. · Do not over-charge the battery. · Do not directly solder the
battery and pierce the battery with a nail or other
sharp object. · Do not disassemble or alter the battery. · Charge the battery
as necessary. Failure to charge the battery frequently may
result in a battery that will no longer accept a charge. · Do not transport or
store the battery with metal objects such as necklaces,
hairpins, etc. · Please recycle a used battery after covering the battery
wires/terminals with
electrical tape or by inserting it into an individual poly bag. Check local
laws and regulations for recycling and/or disposal information. · Under the
environment with electrostatic discharge, the product may malfunction and
require the user to reset the product by turning it off and back on again. ·
Rechargeable batteries are only to be charged by an adult.
BATTERY LIFE AND MAINTENANCE
Check the battery charge level on the quick menu view. If the battery is
yellow, it’s time to charge soon. If the battery is red, charge the battery as
soon as possible.
Charge the battery regularly to maintain optimum performance, even when the
device isn’t regularly in use. For example, charge the device at least once
every six months. Turn the device OFF before charging the battery. Keep the
device OFF when the device will not be in use for an extended period.
23
FCC COMPLIANCE
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from
that to which the receiver is connected. · Consult the dealer or an
experienced radio/TV technician for help. This device complies with Part 15 of
the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. Caution: Modifications not authorized by the manufacturer may void
users authority to operate this device. This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: (1) This device may not cause interference. (2) This
device must accept any interference, including interference that may cause
undesired operation of the device. CAN ICES-3 (B)/NMB-3(B).
Frequency band: 2402-2480MHz Max. transmit power: -0.46 dBm
25
DATED SALES RECEIPT REQUIRED FOR PROOF OF PURCHASE
27
Please keep this manual as it contains important information.
PRINTED IN CHINA 0621-1-E/INT
© 2021 MGA Entertainment, Inc. L.O.L. Surprise!TM is a trademark of MGA in the
U.S. and other countries. All logos, names, characters, likenesses, images,
slogans, and packaging appearance are the property of MGA.
Microsoft® and Windows logos are trademarks of Microsoft Corporation in the
United States and other countries. Macintosh and Mac logos are trademarks of
Apple Inc. in the United States and other countries. All other trademarks are
the property of their respective owners.
MGA Entertainment, Inc. 9220 Winnetka Ave, Chatsworth, CA 91311, U.S.A.
800-222-4685
MGA Entertainment UK Ltd. 50 Presley Way, Crownhill, Milton Keynes, MK8 0ES,
Bucks, UK 0800 521 558
MGA Entertainment (Netherlands) B.V. Baronie 68-70, 2404XG Alphen a/d Rijn,
The Netherlands Tel: +31 (0) 172 758038
Imported by MGA Entertainment Australia Pty Ltd. Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113 1300 059 676