SIDEKICK Mini Bike User Manual

User Manual

INTRODUCTION

Welcome!
Thank you for purchasing an Electric Bike from Alter Ego. We take pride in bringing you a quality product that will offer you years of enjoyment. Alter Ego Electric Bikes are lithium ion battery powered, and feature zero emissions and overall advanced performance. Alter Ego Electric Bikes offer a safe and fun experience for the rider, while also protecting the environment.
Using this manual
This manual contains details of the product, it’s equipment, and information on it’s operation and maintenance. Read it carefully and familiarize yourself with the Electric Bike, before using it, in order to ensure safe use and prevent accidents or injury. Be sure to retain this manual as reference for product knowledge and safe riding. The manual includes cautions concerning the safe operation, and consequences if safe operation is not performed, in respect to operation and maintenance of this product. All information in the manual should be carefully studied, and if you have any questions, you should contact Alter Ego Electric Bikes, toll free, at 1-888-561-5330. The notes, warnings, and cautions included within the dotted red boxes, as shown to the left, should be given special care when reviewing, as they are directly related to hazardous or dangerous situations, if not avoided. While this manual acts as a guide for proper use, it is impossible to anticipate every situation or condition which can occur while riding. This manual makes no representation about the safe use of the Electric Bikes under all possible conditions. There are risks associated with the use of a bicycle which cannot be predicted or avoided, and which are the sole responsibility of the rider. Please save this manual, along with any other documents that were included with your Electric Bike, for future reference, however, all content in this manual is subject to change or withdrawal without notice. Alter Ego makes every effort to ensure the accuracy of this document and assumes no responsibility or liability for any errors or inaccuracies that may appear herein.

PARTS DESCRIPTION

ASSEMBLY INSTRUCTIONS

Parts List (continued…)

NOTE: Hardware provided in your box will vary, depending upon which accessories were purchased. Unnecessary hardware will NOT be included.

Handlebar & Stem

Open the height adjustment clamp on the top of the stem (stem is folded down in transport). Slide the handlebar tube into the folded stem, being sure to index the notch in the tube. tighten the clamp.

Raise the handlebar to the upright position and secure in place by raising up the locking lever.
NOTE: Locking Lever must first be in down position when straightening up the stem, and then raised up to tighten.

Secure the locking lever by rotating the locking ring until it locks around the outside edge of the locking lever.
Attaching Front Rack & Headlight

Mount the Front Rack by inserting three C-Bolts through the Front Rack bracket holes, and screwing into the bolt holes on the front of the bike.

Attach the Headlight to the Front Rack by inserting an E-Bolt through the Headlight bracket and the Front Rack mounting hole, and affixing a Large Washer and Acorn Nut to the end of the bolt. Tighten with tools provided.
NOTE: There is slack for the headlight cable in the controller compartment at the base of the seatpost GENTLY pull the cable to access slack. If you feel the slightest resistance DO NOT pull too hard! Remove The 4 bolts sewing the cover plate for the compartment to access the slack cable.

Pedal Assembly
Unwrap the pedals, and take note of the indication of left (L) and right (R) on the threaded end. Left side pedal screws in counterclockwise. Right pedal screws in clockwise.
NOTE: It is recommended that you brush the pedal screw threads with an Anti-Seize lubricator.
Attaching the Rear Fender To attach the Rear Fender, you will first need to attach the fender support to the fender itself. Align the Rear Fender Support between the two holes on the fender. Slide two D-Bolts through a Bracket, and then through holes in fender.

Slide Bolt Plate behind fender, aligning with fender holes, and hold in place as you screw bolts into plate. Tighten with appropriate hex key, provided.
NOTE: The front end of the Rear Fender has the Fender Support holes further from the end of the fender. The Fender Support that goes in this position is the shorter of the two. Affix the Rear Fender Support (front end) to the bolt holes on the bike frame as shown, using A-Bolts and Small Washers. If NO Luggage Rock will be mounted, Use A-Bolts and Small Washers to affix the Rear Fender Support (bock end) to the remaining bolt holes on the bike frame. If a Luggage Rack is being installed, leave the Rear Fender Support (back end) unattached for now.

NOTE: the Rear Fender Support (front end) feeds behind the brake cable on the left side of the bike, as shown above.
Attaching the Luggage Rack Using two A-Bolts, and two Small Washers, attach the two front arms of the Luggage Rack, to the two bolt holes in the bike frame, located at the base of the seat post. See image above for reference.

Affix Luggage Rock to the bike frame by sliding a Small washer onto a B-Bolt, and using it to screw the Luggage Rack and Rear Fender Support (bock end) into the bolt hole on the bike frame. Repeat on other side.
NOTE: the Luggage Rock support should be positioned in front of the Fender Support (bock end), as shown.
Attaching the Front Fender & Headlight

Place the front fork in between the two brackets on the Front Fender, with the long portion of the fender towards the back. TIP: If you are having trouble sliding the fender bracket between the front fork and the tire, let some air out of the front tire to create more space.

Slide the Front Fender Bolt through the Headlight bracket and slide it through the two fender brackets, positioned around the hole at the top arch of the front fork. Place a Large Washer on the end of the Front Fender Bolt, followed by an Acorn Nut. Use tools provided to tighten, as shown.
Seat Post Battery

The Battery is contained within the seat post of your Sidekick Trail. To connect the battery to the bike, screw the end of the coiled cord, protruding from the bottom of the seat post, onto the connection on the underside of the bicycle frame.

SEAT POST BATTERY LOCK

Seat post Lock

The Lever on the top of the Seat Post tube is used to adjust the seating position. This lever also has a lock incorporated into it, to protect your battery from theft. To adjust the seat height, simply open the lever, slide seat post up or down, and close lever.

To lock the lever in place, simply press down the pin on the top of the lever (as shown). To unlock, insert the key provided, indexing the tab on the key end with the notch in the key hole. Turn counter-clockwise a quarter tum, and back to starting position. Remove key. You will know the lever is unlocked when you see the pin has popped back up.

There is a wrench tool included on your key ring. This is used to adjust the tension on the lever, in case the lever is too loose or too tight. to adjust, first open the lever. Insert the wrench end in the back side of the lever, beside the hinge, and turn to tighten or loosen.

HANDLEBAR COMPONENTS

For more detailed information regarding the use of the Intelligent LCD Display, Please refer tothe manual entitled “LCD Display Manual”,

RIDING YOUR ALTER EGO BIKE

Important tips while riding

1. In order to reduce battery power consumption, increase control, and extend the lifespan of the motor, use the pedals during startups and uphill climbs.
2. Donot press the throttle too fast. Accelerate slowly, reducing battery power consumption, and risk of damage to the electrical system.
3. To increase security and reduce battery power consumption, it is advised to avoid sudden stops and startups by using the pedals.
4. While driving, avoid using the throttle as you brake, as this may damage the motor.

Important tips when parking

1. When pushing the vehicle manually, turn off the power, to avoid accidental acceleration, and accidents.
2.  It is recommended to park indoors.
3. Ina public place, the bike must be parked in accordance with local traffic rules.
4. Do not forget to switch off the power.

BATTERY CHARGING

Battery Charging

1. The battery can be recharged on or off the bike.
2. Remove the battery by unscrewing the coiled cable (on the base of the seat post) from the bike frame. Then loosen the seat clamp and slide the seat post out of the frame.
3. The charger will automatically stop once the battery pack is full.
4. Always charge in dry conditions, and indoors, away from direct sunlight.
5. Check charger cables, charger, and battery, for damage, before beginning each charge.
6. Donot store the battery for long periods of time without expelling and recharging. Lack of use could shorten the life of the battery.

When the battery is removed

1. When the battery is removed, do not touch the metal contacts, especially with wet hands or metallic objects.
2. Place the charger in a flat, secure place, and connect the outlet plug to the socket in the battery box.
3. Connect the input plug (110V/220V wall terminal) to the power outlet, and the charging will start.
4. After the charging has finished, first, unplug the input plug (1 10V/220V wall terminal), and then the output plug (socket in the battery box).

CHARGING TIPS

Charging tips

1. Keep the charger in a safe place, away from children.
2. Do not charge the battery with any other charger than that which was provided with the bike.
3. The charger works with 110V/220V.
4. Do not tamper with, or open, the charger unit.
5. Avoid charger contact with liquids and/or metal objects.
6. Always be sure the charger is safely stored/placed to avoid possible damage from a fall/impact.
7. When in use, the charger should not be covered, to prevent overheating, damage, or fire.
8. The charger is for indoor use only, Please keep it in a dry and well ventilated area.
9. If you notice a strange smell coming from the charger, or it is hot to the touch, stop charging IMMEDIATELY and contact Alter Ego Electric Bikes.

ADDITIONAL CHARGING INFO

When the battery is charging on the bike

1. The battery can be charged on or off the bike.
2. Plug the output lead of the charger into the socket of the battery case.
3. Plug the AC power input plug into the 110V/220V household power socket to start charging.
4. After charging, unplug from the wall outlet first, and then from the bike charger socket.

NOTE: Always charge your battery at temperatures between 50 and 80 degrees Fahrenheit (10 and 27 degrees Celsius), and ensure battery is not damaged before charging.

Duration of charging

1. When the battery is charged for the first time, it should be allowed to charge for 8-10 hours.
2. When the charger is plugged in, the indication light on the charger will be red, showing that the power is connected.
3. When the indication light on the charger turns green, it means that the battery is fully charged. At this point it will switch to trickle charge mode in order to ensure that over-charging will not occur. It takes 2-8 hours for normal charging.
4. Place the charger in a flat, secure place, and connect the outlet plug to the socket in the battery box.
5. Charging should not be more than 24 hours, in order to preserve the lifespan of the battery.

BASIC MAINTENANCE

Basic maintenance checklist
To ensure safe riding conditions, you must properly maintain your bike. You should follow the basic maintenance checklist below, and see your certified local bike shop seasonally, to ensure your bike is safe for use.

1. Normal operation of the light, brake, and power cut system.
2. Tire pressure.
3.   Condition of tires.
4. Tightening and correct operation of both wheels, frame, and front fork.
5.  Battery charging level.
6.  Braking system adjustment and correct operation.
7. Gearshift correct operation.
8. Bell and reflector conditions and correct operation.

Maintenance and cleaning tips

1. Do not wash with high pressure jets, to prevent water infiltration into the electrical system.
2. Dirt on painted surfaces should be removed with a neutral product, then wiped with a dry cloth.
3. Lubricate the bike (chain, pedal spindle, brake and derailleur cables, derailleur assemblies), with suitable lubricant, after washing.
4. Do not apply lubricant on the brakes, brake levers, rims, tires, battery, and controller.
5. If you do not use the bike for long periods of time, charge the battery at least once a month to avoid reducing it’s lifespan.

EXTENDING YOUR RANGE

Saving battery power and extending your range
Frequent braking and starting, riding uphill, riding against strong wind, starting from a standstill, riding on rough or muddy roads, and carrying more than one person or heavy loads, will consume extra battery power and shorten the range. Here are a few tips for prolonging the life of the battery in these conditions:

1. Frequent braking: try to look ahead and coast, rather than stop and go frequently.
2. Riding uphill, or against a strong wind: pedal to supplement the battery power.
3. When starting from a standstill: use the pedals to help bring you up to speed.
4. When the battery meter indicates that the voltage is low, switch to manual power and avoid using the battery to preserve battery power.
5. If the battery is being stored, remove the battery from the bicycle and recharge it once a month.

SAFE USAGE

When operating any bicycle, you expose yourself to some degree of risk; an electric bicycle is no exception. In order to ensure the best, and safest, riding experience, it is wise to learn all you can about product safety precautions, and determine to operate the bicycle in a safe manner. The Alter Ego Sidekick is a stylish way to meet your short-distance travel needs. Check your local laws and regulations in regards to the lawful operation of an electric bicycle, and be sure to obey them.
Safety warnings:

• Warning! Brakes will heat up while riding. Do not touch the brakes after use.
• Do not ride in crowded areas.
• Always pay attention to your own, and others’, safety when riding.
• Use the electric bicycle for ifs intended purpose only.
• Do not attempt to modify the Electric bicycle.
• Do not allow hands, feet, hair, or any other such body parts to touch rotating parts, such as wheels, brakes, motor, while riding.
• Please proceed with caution when riding on wet pavement and/or uneven road.
• Please refer to the user manual for information regarding the electric system specifications and services.
• It is not recommended to ride in dark places at night.

Safety warnings (continued…)

• It is not recommended to ride on snow and/or ice.
• It is recommended to ride on flat, hard, dry, and clean cement or asphalt roads.
• Please avoid riding on water, sand, gravel, broken pavement, and rainy weather (which affects the brakes and visibility).
• Always wear helmet, gloves, kneepads, elbow pads, and any other safety equipment, to ensure maximum safety while riding.
• Always look the bike over, to check for maintenance issues or loose and/or broken parts, before riding.
• It is not recommended to climb or descend a grade of more than 15 degrees.
• User should stay aware of the performance of the brakes. Always begin braking earlier when riding downhill, or on slippery surfaces.
• User should avoid rapid acceleration or deceleration, so avoid excessively thrusting the body backward or forward.
• When battery power is running low, please operate the bike in low speed, and charge the bike as soon as possible.
• If you find yourself at risk of falling off the bike, focus on protecting yourself before the bike! Adhere to the “human safety priority” principle.
• Do not put your hands in your pockets while riding.
• Take initiative to understand, and comply with, local traffic laws and regulations in regards to electric bicycles in your area.
• Pay attention to the surrounding people and objects to avoid collision.

Safety warnings (continued…)

• Always operate at a safe speed for yourself, and for those around you.
• Respect the right of way of pedestrians. Do not frighten them, or risk running into them. Slow down and alert any pedestrians of your presence using your bell.
• Keep a safe distance from other bicycle riders. Do not ride side by side unless there is sufficient room to allow for pedestrians, and/or other traffic, to get around you.
• Do not ride in poor lighting conditions. If you must, slow down and exercise additional caution.
• Please avoid riding backwards as it is very dangerous. If you absolutely must move backwards to move out of the way of another vehicle or rider, limit yourself to walking the bike backwards only a couple of steps.

Active safety protection measures

• Before using make sure that all locking parts are locked in place. (Follow the instructions to install, to avoid causing injury.)
• Check that all screws and nuts are tight before use, to avoid injury.
• Make sure tires are in good shape, are not worn down, and are inflated appropriately.
• Check that the axle protective cover, and all other protective equipment, are in correct position before use.

USEFUL TIPS AND WARNINGS

Useful tips

1. This user manual should be used only to reference use and functions, but should not be used as a reference for inspection.
2. The images shown may differ from the actual model purchased.
3. We reserve the right to change the model without prior notice.
4. The bicycle has a top speed limiter. For safety purposes, the removal of the top speed limiter is strictly prohibited.
5. Ensure pre-ride checks are performed before each and every ride.
6. Only allow others to ride who have been adequately trained on the use and operation of this product.

General warning
Like any sport, bicycling involves risk of injury and damage. By choosing to ride a bicycle, you assume the responsibility for that risk, so you need to know, and to practice, the rules of safe and responsible riding, and of proper use and maintenance. Proper use and maintenance of you bicycle reduces risk of injury. Your bicycle is designed for use by persons 16 years old and above. Riders must have the physical coordination, reaction time, and mental capacity, to ride and mag age traffic, road conditions, sudden situations, and also respect the laws governing bicycle use where they ride, regardless of age. If you have an impairment or disability, such as a visual impairment, hearing impairment, physical impairment, cognitive/language impairment, or a seizure disorder, consult your physician before riding any bicycle.

FOR PARENTS &GUARDIANS

Your electric bicycle is for use by persons 16 years old and older only. Do not let a child younger than 16 years old ride the bicycle.
Note on helmets
Make sure that your child always wears an approved bicycle helmet when riding; but also make sure that your child understands that a bicycle helmet is for bicycling only, and must be removed when not riding. A helmet must not be worn while playing, in play areas, on playground equipment, while climbing trees, or at any time while not riding a bicycle. Failure to follow this warning could result in serious injury or death.
Additional notes for parents
As a parent or guardian, you are responsible for the activities and safety of your child, and that includes making sure that the bicycle is properly fitted to the child; that it is in good repair and safe operating conditions; that you and your child have learned and understand the safe operation of the bicycle; and that you and your child have learned, understand, and obey, not only the applicable local motor vehicle, bicycle, and traffic laws, but also the common sense rules of safe and responsible bicycling. As a parent, you should read this manual, as well as review it’s warnings and the bicycle’s functions and operating procedures with your child, before letting your child ride the bicycle.

WARRANTY INFORMATION

For warranty information,and to register your product ,please visit www.alteragobikes.com.

WARNNIG: IT IS STRONGLY ADVISED THAT BIKE BE ASSEMBLED AND TUNED  BY A PROFESSIONAL BIKE MECHANIC,TO ENSURE OPTIMAL SAFETY AND PEFORMANCE.

#RIDE IT LOVE IT

Documents / Resources

| SIDEKICK Mini Bike [pdf] User Manual
Mini Bike, Mini, Bike
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>